• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.129-141
• /
• 2018

As the scope of social expectations and roles in the design field has expanded, the demand for education to cope with changes in the technology environment is increasing in design education. In response to this trend, microcontroller board-type design-prototyping tools have also been introduced into design education, and much educational content is being developed. However, there is the perception that students who are majoring in design without engineering knowledge are still barred from entry. A variety of educational content and tools have been developed to solve these difficulties, although there are several limitations to their practical application. Especially, in the design education courses in universities, the functional expectation level for prototyping is high, but most of the content developed for solving the difficulties has been developed for the lower education levels, and it could be said that a great deal of learning is necessary to solve the problem. In this study, students were asked about microcontroller board utilization and their satisfaction with their design through questionnaires and with the developed microcontroller board development direction via Focus Group Interviews. Based on this, we tested microcontroller boards that eliminate the coding process and which students can use to create and prototype their work as a suggestion to fulfil demand. After using the board, both the usability and improvement of the product were checked. Confirmation of the usefulness of the free- coding-type microcontroller was obtained through this study along with the possibility of responding to various educational demands by applying the application design related to this product.

• International Journal of Contents
• /
• v.14 no.3
• /
• pp.61-68
• /
• 2018

Unlike in the past, where the expression of the form was given a priority, with the widening of the scopes of the designs, the proportion of design education institution curricula targeting user experience and the application of technology is continually and gradually increasing. Open source microcontroller boards such as Arduino have initiated attracting attention as a countermeasure against these changes. These prototyping tools have many advantages for the diversification of expression and design verification in the design field and therefore have a high likelihood of being introduced into many design education institutes; however, the tools act as high entry barriers for design students who lack engineering knowledge. Although various educational content and tools have been developed to address the issue of barrier, existing solutions remain insufficient as alternatives for the purpose of activation. In this study, we investigated the present state of related education content and conducted a pilot workshop using a prototype microcontroller board with simplified coding. We intend to use the results of this investigation to develop study material for design education. We started by conducting a survey regarding the pre-university education situation. It was observed that engineering education opportunities are insufficient and the problem of mutual application between educations due to course-based education was not realized. We also analyzed the characteristics of simplified training tools using the microcontroller to establish a direction for educational design and conducted a pilot workshop using the microcontroller toolkit with a simplified coding process based on this content. Students who lack a basic knowledge of engineering technology received instruction, and after completing minimum preliminary training, they proceeded to practical exercises that involved utilizing the toolkit. Through this process, we identified the need for a simple-type microcontroller board with low-complexity for use in educating students majoring in design. We also identified some obstacles that serve as barriers to entry of utilizing microcontroller board. Based on these results, we propose several functional requirements and teaching guidelines for prototyping toolkits for design education.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3335-3343
• /
• 2021

The impact of gamma radiation on a commercial off the shelf microcontroller board has been investigated. Three different tests have been performed to ascertain the radiation tolerance of the device from a nuclear decommissioning deployment perspective. The first test analyses the effect of radiation on the output voltage of the on-board voltage regulator during irradiation. The second test evaluated the effect of gamma radiation on the voltage characteristics of analogue and digital inputs and outputs. The final test analyses the functionality of the microcontroller when using an external, shielded voltage regulator instead of the on-board voltage regulator. The results suggest that a series of latch-ups occurs in the microcontroller during irradiation, causing increased current drain which can damage the voltage regulator if it does not have short-circuit protection. The analogue to digital conversion functionality appears to be more sensitive to gamma radiation than digital and analogue output functionality. Using an external, shielded voltage regulator can prove beneficial when used for certain applications. The collected data suggests that detaching the voltage regulator can extend the lifespan of the platform up to approximately 350 Gy.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.229-232
• /
• 1995

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.227-235
• /
• 2011

This paper describes a PMSM control algorithm for realizing a low-cost motor drive system using a general purpose microcontroller. The proposed sensorless algorithm consists of the current observer and the sensorless scheme based on instantaneous reactive power. Also the control board system is not the high-cost DSP(digital signal processor) system but the general purpose microcontroller and it allows to reduce the unit cost of the motor system. However the clock frequency of the proposed microcontroller is one-fifths for the clock frequency of the DSP. In addition, the switching frequency must be selected as the lower frequency because of complex mathematic modeling of the sensorless algorithm. the low switching frequency augments the noise of the motor and might make accurate speed control impossible. Thus this paper proposes the optimization method to supplement the drawback of the general purpose microcontroller and the usefulness of the proposed method is verified through the experiment.

• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.107-116
• /
• 2018

In the past, design has been recognized as a means to determine colors, shapes, and functions Recently, however, it has been accepted in a wider sense, namely designing the entire service, including product and user experience design. In this way, in addition to creativity and expressive power that designers have as their main competence, according to the expansion of this design object, designers are required to have comprehensive abilities in related fields and accompanying technical professional abilities. If designing as a technology application as a direction toward this situation, design education can be carried out by approaching technology as a method of expression or design subject. It can also be an effective alternative towards improving the understanding of technology. Meanwhile, many small microcontroller board products with advanced functions and multi-functional specialized programming integrated development environments (IDEs) are becoming widespread due to their open source, low cost, and scalable features. However, students in the design department who lack the basic knowledge of science and engineering have difficulties learning, which requires considerable time and is required for practical use. From this point of view, we have made advancements in the technical understanding of design education by conducting fundamental research to the effectiveness of microcontroller-based prototyping tools as means of expression. We also conducted basic education of microcontroller boards for a certain period of time on students who majored in design in conjunction with the basic survey and investigated the obstacle factors using a questionnaire. Through these surveys, we have confirmed the necessity of designing microcontroller boards of low difficulty, which simplify the coding process that can act as a barrier in difficulty for design students to apply smoothly in design education. In addition, we intend to carry out a basic study on the guideline of microcontroller design for design education and composition of education programs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.185-188
• /
• 1993

The goal of this paper is to develop an on-board controller for a model helicopter's hovering attitude control, using i8096 one-chip microcontroller. Required controller algorithm is programmed in ASM-96 assembly language and downloaded into an i8096 microcontroller. The performance of hovering flight using this system is verified by experiments with the model helicopter mounted on an instrumented flight stand where 3 potentiometers and an optical proximity sensor measure te attitude and main rotor speed of the helicopter.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.1016-1023
• /
• 2013

Predictive current control offers the potential for achieving more precise current control with a minimum of distortion and harmonic noise. However, the predictive method is difficult to implement and has a greater computational burden. This paper introduces a theoretical analysis and experimental verification for an improved predictive current control technique applied to single phase grid connected voltage source inverters (VSI). The proposed technique has simple calculations. An ATmega1280 microcontroller board is used to implement the proposed technique for a simpler and cheaper control system. To enhance the current performance and to obtain a minimum of current THD, an improved tri-level PWM switching strategy is proposed. The proposed switching strategy uses six operation modes instead of four as in the traditional strategy. Simulation results are presented to demonstrate the system performance with the improved switching strategy and its effect on current performance. The presented experimental results verify that the proposed technique can be implemented using fixed point 8-bit microcontroller to obtain excellent results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1654-1660
• /
• 2004

In this paper, we describes the design and implementation of LonWorks communication module for distributed intelligent control using LonWorks technology of Echelon. LonWorks communication module can be divided hardware and firmware. First, hardwares is divided into microcontroller attaching sensors and LonWorks components for working together control network and data network. Hardwares are consisted of neuron chip, microcontroller, transceiver, LONCard. Second, operating firmware is realized with neuron C using NodeBulider 3.0 development tool. Produced and implemented LonWorks communication module is pretested using LTM-10A, Gizmo 4 I/O board, parallel I/O Interface. For field test, microcontroller module part is tested by HyperTerminal, communication procedure in data network is certified by transmitting and receiving short message using LonMaker for Windows tool. Herewith, LON technology is based on network communication technique using LonWorks.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.60-65
• /
• 2018

The Internet of Things (IoT) is happening now. By implementing IoT, we can build smart home system. Smart home is an application that is a combination of technology and services that specialize in the home environment with specific functions aimed at improving the efficiency, comfort and security of the occupants. Smart homes filled with connected products are loaded with possibilities to make our lives easier, more convenient, and more comfortable. This intelligent home system uses a microcontroller to process functions that provided by smart home system, such functions as RFID for door access and PIR sensors for motion detection. By using Android users could control the sensors anytime and anywhere. Microcontroller used is Arduino IDE with WeMos D1R2 board. Based on the testing process, there was a successful communication between the components of the device, sensors, and Android devices. Users could open or close the solenoid, users can also turn off or turn on electronic devices using Android.