• 전자공학회논문지S
• /
• 제34S권8호
• /
• pp.10-19
• /
• 1997

In this paper, perfodrmance of matched-filter (MF) acquisition scheme is analyzed for a direct-sequence/code-division-multiple-access (DS/CDMA) system in a microcellular environment. Mean acquistion time is used as a performance measure. It is demonstrated that acquisition performance is enhanced using interference suppression filter in a Rician fading channel. To apply for multiuser environments, multiple access interference is considered in the performance analysis. From the numerical results, it is shown that mean acquistion time decreases with the increasing SNR/chip, and acquisition performance is improved as the number of taps of interference suppression filter. It is also shown that mean acquisition time increases with the number of users in the system, and acquistion performance is degraded as the icrease of narrowband interference bandwidth. The analysis in this paper can be applied to a DS/CDMA overlay environment.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.469-469
• /
• 1995

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.585-590
• /
• 1997

Conventional foaming process has defects such as lower mechanical properties than ur~foaming material due to non-uniform cell distribution and environmental pollution problem caused by chemical blowing agency. So, a new foaming process such as Microcelluar plastics has been introduced to use inactive gases as a foaming agency. In order to apply Microcellular plastics for mass production process system such as extrusion, injection molding and blow molding, it needs to predict the change in material properties of polymer according to the amount of meltingas. In Polymer molding applying Microcelluar plastics, the change of viscosity among several material properties is the most important factor. Therefore, this paper is aimed to establish the method which not only finds out but also predicts the change of viscosity of ABS(Acrylonitri1e Butadiene Styrene) resin according to inert gas amount in extrusion molding.

• 폴리머
• /
• 제39권2호
• /
• pp.293-299
• /
• 2015

전기 전도성을 갖는 발포체를 개발하기 위해 고내상 에멀젼(HIPE) 중합법으로 폴리스티렌(PS)/폴리도파민-탄소나노튜브(PDA-CNT) 미세기공 발포체를 제조하여 발포체의 모폴로지 및 전기 전도도를 고찰하였다. 전도성을 부여하기 위한 나노충전제로 CNT를 사용하였는데 수분산성과 HIPE의 안정성을 향상시키기 위하여 CNT 표면을 친수성인 PDA로 개질한 PDA-CNT를 사용하였다. PDA-CNT는 분산성이 우수하여 첨가량을 높여 HIPE를 구성할 수 있었고 전도성이 향상된 발포체를 제조할 수 있었다. 제조한 미세기공 발포체는 기공이 상호 연결된 구조의 모폴로지를 보여 주었다. PDA-CNT의 함량 증가에 따라 HIPE의 항복응력 및 저장 탄성률은 증가하였고 제조된 발포체의 기공 크기는 작아졌다. 전기적 임계점을 보여주는 PDA-CNT 함량은 대략 0.58 wt%였고 PDA-CNT 함량을 5 wt% 첨가했을 때의 전기 전도도는 $10^{-3}S/m$를 나타내었다.

• 한국경영과학회지
• /
• 제26권2호
• /
• pp.1-11
• /
• 2001

This paper considers the scheduling of cell-based handoffs to balance the traffic in a fiber-optic microcelluar system. In the system depending on the order of cell based handoff, periodical balancing of the traffic among microcells can be achieved. The cell based handoff problem is formulated as a dynamic programming and the computational complexity is analyzed. Since the scheduling problem requires real time solution, heuristic algorithms are proposed and the computational results are discussed.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.54-61
• /
• 1999

본 논문은 밀리미터파를 사용하는 광대역 무선 접속용 마이크로 셀룰라 시스템에 적용할 수 있는 새로운 광링크 구조를 제시하고 분석한다. 제안된 링크 구조는 EOM(electro optic modulator)의 비선형성에 의해 발생하는 고조파 성분을 광믹성(photonic mixing)에 이용해 링크로 입격되는 전기 신호를 주파수 천이시켜 BS(base station)에서의 전기적 믹싱을 불필요하게 하며 또한 CS(central station)로부터 공급된 밀리미터파 광 캐리어를 사용하므로써 BS에 능동 광원(optical source)이 없도록 하여 BS의 구조를 간단히 한다. 제시된 링크 구조에 대한 하향링크(downlink) CNR(carrier to noise ratio), IM3/C(third order intermoulation to carrier ratio) 및 상향링크(uplink) SFDR(spurious free dynamic range)에 대한 분석 및 상용소자의 파라메타값을 이용한 시뮬레이션을 통하여 제시된 링크 구조가 현재의 마이크로 셀룰라 시스템 요구조건을 만족시킬 수 있음을 보인다.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.87-92
• /
• 2005

In microcellular injection molding, gas supply system is needed. But, that device is very expensive to attach to the injection molding machines. So, new method is needed and gas-pellets MCPs is one of the solutions. In gas-pellets MCPs, there will be strange characteristics. In this paper, some characteristics are described on the view point of saturation pressure and saturation time.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.186-189
• /
• 1998

In this paper, we provide a mathematical formulation to describe the random mobility of users in cellular radio systems. With this, we can also study tile cell sojourn time (CST) distribution as well as the channel holding time (CHT) distribution. The study on user mobility enables to improve the resource management in cellular radio systems. We provide a versatile analysis tool that improves the limit of simplified analyses.

• 한국전자파학회논문지
• /
• 제9권1호
• /
• pp.60-71
• /
• 1998

마이크로셀룰라 이동 무선 시스템의 전파환경은 레일라이, 라이시안 페이딩과 경로손실, 로그노말 새도우잉 동의 영향을 받는다. 이러한 복합적 환경에서 L개의 라이시안 간섭 사이에서 수신된 라이시안 신호와 로그노말 새도우영의 영향을 고려하여 재사용거리와 cluster 사이즈, 신호대 간섭의 전력비, 임계비(protection ratio) RI 둥 여러 파라미터에 대한 특성을 outage 확률을 이용하여 분석하였다. 또한 본 논문에서 이용한 outage 확률로 레일라이 신호와 단일 라이시안 간섭, 라이시안 신호와 레일라이 간섭, 라이시안 신호와 라이시안 간섭 둥에 대해 연구하였다. 이론 전개와 시뮬레이션 결과를 통해 로그노말 새도우드 라이시안 채널의 특성을 효과적으로 분석하였다.