• 제목/요약/키워드: microbial biocide

검색결과 6건 처리시간 0.024초

토양 내 은나노 처리 시 비료에 의한 염류 효과 (Overview of Salt Effect of Fertilizer on Nano-Silver Application in Soil)

  • 양재의;김성철;이윤수;김동국
    • 한국토양비료학회지
    • /
    • 제42권Spc호
    • /
    • pp.1-3
    • /
    • 2009
  • 은나노입자는 살균 효과 때문에 농업현장에서 사용되고 있다. 그러나 은나노입자가 토질에 미치는 영향에 대해서는 아직 많은 정보가 없다. 그러므로 비료가 처리 되었을 때 특히 토양에 은나노입자를 처리한 효과에 대한 검증이 반드시 필요하다. 가리계 비료를 모의 실험하기 위해서 토양에 염화가리를 은나노입자와 함께 처리하였다. 은과 염소의 농도는 처리 후 78 내지 84% 그리고 kg 당 3.4 mg 정도 감소하는 경향을 보였다. 그리고 은나노입자와 염화가리를 혼합하였을 때 미생물의 숫자가 증가하였다. 이러한 결과로부터 비료시용은 토양에서 은나노입자의 살생물 효과에 영향을 미친다.

Bacillus sp. WRD-1 배양액 처리가 토마토 생육에 미치는 영향 (Growth Effect of Tomato Treated with Bacillus sp. WRD-1 Cultures)

  • 옥민;서원석;배계선;권오창;박수진;조영수
    • 한국환경농학회지
    • /
    • 제20권1호
    • /
    • pp.63-66
    • /
    • 2001
  • 토양으로 부터 분리한 Bacillus sp. WRD-l의 토마토 생육에 미치는 영향을 조사하기 위하여 미생물 배양액을 100배, 300배, 500배의 희석 비율에 따라 토마토재배지에 관주를 실시하여 토마토 생육 및 토양미생물상 변화를 관찰 하였다. 대조구로는 실제 미생물의 영향을 확인하기 위하여 Bacillus sp. WRD-1 배양액을 멸균하여 사용하였다. 토마토 생육은 전체적으로 100배> 300배> 500배> 대조구 순으로 희석 비율과 비례하였다. 시간별 토양미생물 수는 세균과 방선균의 수는 증가하는 경향을 보였으며, 곰팡이수는 감소하는 경향을 보였다. 이러한 결과로 토양활성개량미생물제로의 개발 가능성을 확인하였다.

  • PDF

우리나라에서 사용하는 광물유(금속가공유)의 유해특성과 관리대책에 관한 연구 -수용성 금속가공유의 유해특성과 관리대책- (Control and Investigation for Hazardous Characteristics of Metalworking Fluids Used in Korea - Control and Hazardous Characteristics of Soluble MWF)

  • 백남원;박동욱;윤충식;김승원;김신범;김귀숙
    • 한국산업보건학회지
    • /
    • 제8권1호
    • /
    • pp.67-75
    • /
    • 1998
  • The objectives of this study were both to evaluate the level and correlations of hazardous agents and to suggest measures to control industrial hygiene problems caused by using water-soluble metalworking f1uids(MWF). Geometric mean of formaldehyde(0.039 ppm) was higher than criteria of NIOSH(0.016ppm). Formaldehyde, originally existed in the biocide, is released and used to kill microbes in soluble MWF. Microbe concentrations were above $10^4No./mL$ in 14 MWF tanks among 20 tanks surveyed. Nitrosamines that is formed by reaction of nitrosating group and amines was detected to $18.4-47.1{\mu}g/m^3$. Formaldehyde concentration was low when microbes were abundant(r=-0.67, p=0.011), and high when open tank area was wide(r=0.75. p=0.012). The significant relationship between pH and microbes(r=-0.76. p=0.003) was also observed. The predominant bacteria species in MWF were Pseudomonas spp., Bacillus spp., Comamonas testosteroni, Acinetobacter haemolyticus, Bordertella bronchiseptica in order. Therefore, hazardous agents emitted by using water-soluble MWF seems to be correlated microbial growth. In order to minimize worker's exposure to several hazardous agents by an water-soluble MWF and to increase productivity, microbial growth must be controlled to the lowest level as possible. Administrative control as well as engineering control must comprehensively be applied to control microbe's growth in water-soluble MWF.

  • PDF

Enhancement of antimicrobial properties of shoe lining leather using chitosan in leather finishing

  • Mahmud, Yead;Uddin, Nizam;Acter, Thamina;Uddin, Md. Minhaz;Chowdhury, A.M. Sarwaruddin;Bari, Md. Latiful;Mustafa, Ahmad Ismail;Shamsuddin, Sayed Md.
    • Advances in materials Research
    • /
    • 제9권3호
    • /
    • pp.233-250
    • /
    • 2020
  • In this study, a chitosan based coating method was developed and applied on the shoe lining leather surface for evaluating its inhibition to bacterial and fungal attacks. At first, chitosan was prepared from raw prawn shells and then the prepared chitosan solution was applied onto the leather surface. Secondly, the characterization of the prepared chitosan and chitosan treated leather was performed by solubility test, ATR-FTIR, XRD pattern, SEM and TGA. Evaluation of antimicrobial efficacy of chitosan was assessed against two gram positive, two gram negative bacteria and a reputed fungi by agar diffusion test. The results of this study demonstrated that chitosan took place in both the surface of collagen fibres and inside the collagen matrix of crust leather. The chitosan showed strong antimicrobial activities against all the tested microorganisms and the inhibition increased with increasing percentage of chitosan. Therefore, the prepared chitosan in this study can be an environment friendly biocide, which functions simultaneously against different spoilage bacteria and fungi on the finished leather surface. Thus by using the prepared chitosan in shoe lining leather, the possibility of microbial attack during shoe wearing can be minimized which is one of the important hygienic requirements of footwear.

Useful and Effective Diagnosis and Evaluation Tools for Eenvironmental Change in Increased Mill Water System Closure

  • Linda R. Robertson;Lee, Byung-Tae;Kim, Tae-Joon
    • 펄프종이기술
    • /
    • 제33권5호
    • /
    • pp.1-11
    • /
    • 2001
  • In the past, abundant and clean water was available for paper mills'use. However, the growth of population and industry made water less available nowadays. Also, environmental regulation limits wastewater discharge, which affects mill operation cost. Therefore, paper mills are under pressure to use more recycled water and mill system closure. As a result, chemical and physical parameters of water are changing and new environment if being created for microorganisms in paper mill system as well. The more soluble or suspended organic materials are increased as more water is recycled and less or scarce dissolved oxygen is available, depending on the degree of recycled water usage. Microorganism flora ill paper mill system will be a1so shifted according to the environmental change of mill system. Anaerobic bacteria, including sulfate reducing bacteria (SRB), will be dominant in the system as very low or almost no oxygen available in the system. Nevertheless, it is common in domestic paper mills that employ the same and old biocides as a means of microbial control, and microbiological control is often less recognized or even neglected. The right biocide selection for increased reductive environment of mills is critical for operation and estimated loss from paper quality defects such as sheet break, holes due to microbiological cause is tremendous compared to the microbiological control cost. It is imperative to investigate and diagnosis the environmental change of mills for right control of cumbersome microorganisms. Several useful diagnosis tools, including new technology employing OFM(Optical Fouling Monitor) in situ, are illustrated.

  • PDF

생물소재를 이용한 황색포도상구균의 바이오필름 억제 연구 (Biomaterials Inhibiting Biofilm Formation of Staphylococcus aureus)

  • 신계호;윤유나;전기붕;이태룡;이성원;조준철;박지용
    • 대한화장품학회지
    • /
    • 제37권4호
    • /
    • pp.347-350
    • /
    • 2011
  • 바이오필름은 부유 미생물이 피부 표면에 부착되어 형성된 미생물 집락이며 형질적 생화학적 특성에서 부유상태와는 차이가 있다. 바이오필름으로 증식하는 미생물은 부유 상태의 미생물 보다 숙주의 방어나 항생제에 대한 저항성이 훨씬 높기 때문에 바이오필름이 형성되면 감염 상태를 치료하기 위해 더욱 많은 항생제를 사용해야 한다. 따라서 감염된 세균의 내성을 피하면서 치료를 하기 위해서는 단순히 세균을 사멸하는 것이 아니라 표적을 달리하는 새로운 전략이 필요하다. 이번 연구에서는 아토피 등 염증성 피부 질환의 원인균의 S. aureus의 바이오필름을 억제하는 기작에 초점을 맞추어 연구를 진행하였다. 이 연구의 목적은 S. aureus의 바이오필름의 형성을 억제하여 피부질환을 조절할수 있는 후보 물질을 찾는 데에 있다. 슬라이드글라스를 human placental 콜라겐으로 코팅고 시험 물질과 함께 배양하여 억제된 바이오필름의 양을 crystal violet 염색법으로 측정하여 정량적으로 측정하였다. 이 실험에서는 표준균인 S. aureus ATCC 6538 strain이 사용되었다. 실험 결과 편백다당체가 바이오필름의 형성을 강하게 억제하였으며 녹차다당체와 황촉규근은 오히려 바이오필름의 형성을 촉진하였다. 자일리톨은 1 %의 낮은 농도에서는 바이오필름을 촉진하나 그 이상의 높은 농도인 3 %와 5 %에서는 억제하여 농도 의존적인 결과를 보였다.