• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1149-1152
• /
• 2008

Nitride semiconductor based light-emitting diodes attain a new functionality of polychromatic emission by the use of three-dimensionally faceted microstructures, which may lead to an advanced lighting technology in which the light source spectra are synthesized so as to meet requirements of the application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3322-3324
• /
• 1999

This paper studies on the design and fabrication of a micro in-plane positioning actuator integrated with a microlens. Proposed in-plane actuator is a micro XY-stage which is composed of two linear comb drive actuators being orthogonal to each other. In the fabrication of actuator, the single crystalline silicon substrate anodically bonded with a #7740 glass substrate is used because of simple release and passivation. The structure of actuator is formed on the silicon facet of bonded fixture by chlorine-based deep RIE and then released by isotropic wet etching of glass (#7740) in hydrofluoric acid solution. Fabricated actuator has a large travel range up to $30({\pm}15){\mu}m$ and high resolution less than 0.01f1l1l in each direction. Experimented resonant frequency of this actuator is 630Hz. The micro-Fresnel lens is fabricated on the square-shape glass structure prepared in the center of actuator.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.227-235
• /
• 2000

Agricultural products are easily deformable its shape because of some external forces. However, these force behavior is difficult to measure quantitatively. Until now, many researches on the mechanical property was performed with various methods such as material testing, chemical analysis and non-destructive methods. In order to investigate force behavior on the cellular unit of agricultural products, electro-microscope based 3D image processing method will contribute to analysis of plant cells behavior. Before image measurement of plant cells, plant sample was cut off cross-sectioned area in a size of almost 300-400 ${\mu}$ m units using the micron thickness device, and some of preprocessing procedure was performed with fixing and dyeing. However, the wall structure of plant cell is closely neighbor each other, it is necessary to separate its boundary pixel. Therefore, image merging and shrinking algorithm was adopted to avoid disconnection. After then, boundary pixel was traced through thinning algorithm. Each image from the electro-microscope has a information of x,y position and its height along the z axis cross sectioned image plane. 3D image was constructed using the continuous image combination. Major feature was acquired from a fault image and measured area, thickness of cell wall, shape and unit cell volume. The shape of plant cell was consist of multiple facet shape. Through this measured information, it is possible to construct for structure shape of unit plant cell. This micro unit image processing techniques will contribute to the filed of agricultural mechanical property and will use to construct unit cell model of each agricultural products and information of boundary will use for finite element analysis on unit cell image.

• 한국결정성장학회지
• /
• 제25권5호
• /
• pp.182-187
• /
• 2015

GaN 스트라이프 구조의 정상 부분에 Metal Organic Chemical Vapor Deposition(MOCVD) 방법에 의해 선택적으로 결정 성장된 마이크로 크기의 AlGaN 어레이 구조의 성장과 그 특성에 관해 연구하였다. AlGaN 어레이 구조의 형태 변화가 선택 성장을 위한 노출 면적에 의존한다는 것을 확인하였다. 상대적으로 넓게 노출 된 성장 영역 위에서 선택 성장된 AlGaN 어레이 구조는 기판 위의 GaN 스트라이프와 유사한 규칙적인 모양을 가지는 반면 상대적으로 좁게 노출된 영역 위에서 선택 성장 된 AlGaN 어레이 구조는 불규칙한 모양을 가진다. 한편, Al 조성비가 증가함에 따라 AlGaN 어레이 미세 구조에 대한 고유 포논 진동수도 높아짐을 확인할 수 있었다. 하지만 상대적으로 높은 Al 조성비에서는 고유 포논 진동수는 AlGaN 구조와 그 아래의 GaN 스트라이프 사이의 큰 격자상수 차이와 선택적 결정 성장 과정 동안의 결정면 방향의 변화에 의해 강한 tensile strain으로 인해 다시 감소하는 경향을 보임을 확인하였다.