• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.168-174
• /
• 2002

A new circulating hydroponic system was invented for oriental melons grown in the greenhouse. For developing nutrient solution management techniques, we examined the changes of nutrient contents of circulating solution in three different types of new hydroponic systems. The yield and fruit quality of oriental melons in Hydroponics were better than those in soil culture. The substrate culture was appropriate fer hydroponics of oriental melons, and NFT was turned to be the opposite due to the physiological disorder during hot seasons. Yamazaki's melon solution with EC 2.0dS.m$^{[-10]}$ was the most appropriate for oriental melons. The new circulating hydroponic system seemed to be appropriate for oriental melons because of the stable EC, pH and the macro- and micro-element contents. NO$_3$-N, Ca and Mg contents in the circulating solution kept a good balance in all types of hydroponics. However, p content, compared to other types, decreased by the degree of 1 me.L$^{[-10]}$ in perlite medium. K content showed irregular status in perlite but showed the stable status in cocopeat. Generally, microelements, except Mo, showed stable absorption in the substrate culture. However, in NET, most of the elements showed irregular absorption except B and Mn. Microelement absorption, especially Cu, Zn and Mo, decreased during hot seasons.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.1-22
• /
• 1999

In order to investigate various physical and biological properties of dental magnetic attachments studies on retentive characteristics, corrosion properties, cytotoxicity of different magnetic systems for dental applications were done. For the study of retentive characteristics changes of retentive force by increasing air gap, wear properties of various attachment systems and loss of magnetic force by heat treatment were measured. Forte study of corrosion property of magnet covering metal electrochemical corrosion was done in artificial saliva and 0.9% NaCl solution between $-1,000mV_{SCE}\;and\;+1,000mV_{SCE}$. Anodic polarization curves are obtained about 6 types of samples and 2 types of solution. Corroded surfaces were examined with metallurgical microscope, scanning electron microscope and surface profilometer. For the study of cytotoxicity of magnetic attachment and its field cell growth and agar overlay test were done. The results of this study were as follows. 1. In Magnetic attachments using closed circuit retentive force at zero air gap was greater than magnets using open circuit, but decrease of retentive force by increasing air gap was also greater than open systems. 2. After 40,000 cycles of wear test all mechanical attachment resulted in varing degree of retention loss but in magnetic attachments no loss of retentive force was observed. 3. The magnetic attachment using Neodymium magnet showed early loss of retentive force about $200^{\circ}C$ but attachment using Samarium magnet showed some resistance to heat treatment and complete retention loss was observed about $500^{\circ}C$. The keeper was not influenced by heat treatment in retention. 4. In electrochemical corrosion test Dyna magnetic attachment covering metal showed the highiest corrosion resistance and Shiner magnet covering metal showed the least corrosion resistance and examination of corroded surface with metallurgical microscope, scanning electron micro-scope and surface profilometer also showed same results with anodic polarization corves. 5. The result of cell culture tests on the magnet covered with metal showed least recognizable cytotoxicity.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.66-71
• /
• 2011

With the synthesis of hyper crosslinked polymer particle (HCPP), having microporous structure with hydroxyl functional group, synthesized via polymerization reaction consists of three stepssuspension polymerization, hyper crosslinking by Friedel-Craft catalysis and hydrolysis reaction, the effects of the ratio of each monomer, hyper crosslinking conditions and $CO_2$ supercritical drying on the variations of surface morphology, pore size & distribution and BET surface area of HCPP have been investigated. It was observed that the formation of surface crack or fracture of HCPP was intimately related with the degree of hyper crosslinking reaction between microphase separated domains. And the value of BET surface area of HCPP increased with the increase of reaction temperature, time and the amounts of solvent used in hyper crosslinking step. Moreover, $CO_2$ supercritical drying was proven to be a very effective method for removing stabilizer, unreacted monomers and oligomers from HCPP but needed to add methanol as a co-solvent for efficient removing of residual catalyst.

• Korea journal of population studies
• /
• v.21 no.2
• /
• pp.113-143
• /
• 1998

Married women who follow occupations have remarkably increased. Economic-activies married women[EAMW] have experienced a great degree of role confilcts as the results of that they should play the role of wage workers and do duty as household affairs as well as raise children. To understand problems of EAMW and to make alterniative plans for EAMW, the daily life actives of EAMW should be examined. This study attempts to understand the daily life activites of EAMW. To obtain the goal this research generalizes the daily life actives of EAMW. classifies the patterns the activites, and analyzes the activites in the micro-level. The acivites of EAMW mainly consist of formal business and household affairs. The spatial bounds of activities are influenced by weekdays and holidays. During the weekday their activities are mainly found around residences and/or work places; while, during the weekend, they are discovered around residences and/or around residences or relatives who take care of their children. EAMW move longer distance rather than a full-time housewife; however, the activites of EAMW are residential orientation like those of full-time housewives. The role conflicts of EAMW are mainly from social cultural structure, the distance between workplace and residence, and the location of public service institutes.

• Journal of dental hygiene science
• /
• v.18 no.3
• /
• pp.164-171
• /
• 2018

To improve the oral health status of Korean people, it is necessary to encourage proper oral hygiene management habits, such as toothbrushing, through appropriate health promotion techniques. Therefore, the purpose of this study was to evaluate the removal of plaque and tooth abrasion using ultra-soft (filament 0.11~0.12 mm) and soft toothbrushes for toothbrushing. The plaque removal was performed using a dentiform and Arti-spray, and the Patient Hygiene Performance (PHP) index was calculated as the sum total score divided by the total number of surfaces. In the abrasivity experiment, according to the number of brushings, a micro Vickers hardness tester was used, and a sample in the range of 280~380 Vickers hardness number was selected. The number of toothbrushing stroke were 1,800 (2 months), 5,400 (6 months), 10,800 (12 months), and 21,600 (24 months). The tooth abrasion was measured using a scanning electron microscope. Statistical analysis was performed using IBM SPSS Statistics 22.0 and a p-value <0.05 was considered significant. According to the results, there was no statistically significant difference in the degree of plaque removal between ultra-soft and soft toothbrushes. The difference in tooth abrasion between before and after toothbrushing was found to be greater with the soft toothbrushes than with the ultra-soft toothbrushes. Therefore, the ultra-soft toothbrush not only lowers tooth damage by reducing tooth abrasion, but also shows a similar ability to remove plaque as soft toothbrushes.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.686-692
• /
• 2015

Cancer is subject to dynamic interactions between contrary immune reactions that drive both tumor growth and suppression. Forkhead box p3 positive T cells (Foxp3 positive T cells) might support tumor promotion, while CD8 positive T cells might protect the host. The present study examined the distributions of CD8- and Foxp3-positive T cells and CD8 positive T cells/ Foxp3 positive T cells ratio in skin squamous cell carcinoma (SCC) and its precancerous lesions; it also compared this with data for basal cell carcinoma (BCC). Iimmunohistochemical staining for CD8 and Foxp3 was conducted in 20 cases of SCC, Bowen's disease (BD), actinic keratosis (AK) and BCC. The BD and SCC cases exhibited significantly increased numbers of both CD8- and Foxp3-positive T cells in their advancing regions compared with the AK and BCC cases, and the BD cases exhibited significantly lower CD8 positive T cells / Foxp3 positive T cells ratio in these regions than did the AK and BCC cases. There was no significant difference in both T cells and the ratio between BD and SCC. The degree of both T cells infiltration differed between the advancing and central areas in SCC and BCC. Immune micro-environments differ between cutaneous squamous cell tumors and BCC and differ as well among tumor compartments.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.423-429
• /
• 2003

Kimchi has been worldwide recognized as a traditional Korean fermented food, In the Chinese cabbage's pickling, salt content of evenly penetrate into the tissue affects on the texture of matured kimchi, But the previous method which usually using brine salting has a disadvantage of uneven penetration of salt into the leaves and stems. The purpose of the study is to develope the method which produce superior kimchi by evenly penetrate the salt into the tissue rapidly, The dry salting method is directly spread the salt on the surface of chinese cabbage as percentage in weight with 10, 12, 14, 16%(s) and pickled in this state for 5 hours. Brine salting method is soaking chinese cabbage in the 16% salt solution(16%B) for 20 hours. Sensory evaluation, contents of salt, properties of mechanical hardness and micro structure were studied among fresh cabbage, 16%B and 10, 12, 14, 16%(s) cabbage, The result of salt contents in all groups of pickled chinese cabbage were significantly increased compared with fresh cabbage. The compressive force of cabbage's steams by mechanical measurement was significantly decreased but cutting force was increased. In pickled cabbage, the cutting force was the highest correlated with salt content, In the sensory evaluation, the salty taste of leaves and chewy degree were significantly increased, but the hardness and crips of the stems were significantly decreased by increasing salt contents. Therefore the dry salting is the most excellent pickling method in small amount of kimchi production by saving salt amount and time, furthermore due to even penetration of salt into leaves and stems.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.459-469
• /
• 2016

The goal of this study was to examine property changes induced by the choice of filler used with an epoxy resin that was developed in 2014 to restore cultural assets and consider the applicability of the resin as a restorative agent. The properties of putty mixed with 9 types of fillers and as-developed resins were compared with those of existing materials with regard to stability, superiority and applicability. The potential of the putty as an alternative material was also examined. The materials produced the best adhesiveness, color change and hardness results when mixed with lime. Micro balloon produced the best wear rates and hardening times, while diatomite produced the best tensile and compressive strengths. A plaster and white mineral pigment mixture produced the best specific gravity. Every material except for lime exhibited about 2.5-20 times higher wear rates than the existing material, which is thought to exhibit an excellent cutting force. The hardening time was enhanced by about 0.5-9 times to improve convenience. The stability of the relic was also ensured by improving hand staining without any shrinkage or deformation. The material exhibited about 0.5-27 times less yellowing. Thus, it is thought to be a material that can reduce property changes and reduce the degree of relic fatigue which occurs during reprocessing and sense of difference from relic.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.176-181
• /
• 2013

The impacts of habitats changes of benthic macroinvertebrae species and individuals of the torrents due to construction of torrent structures can be summarized as follows. Approximately 16 to 40 species and 352 to 4,333.3 individuals of benthic macroinvertebrae were found around the local position of the torrent structures. Construction of torrential structures can increases the stability in the riverbed by preventing vertical corrosion and reducing the flow rate. However, if pond is created due to increase flow rate of rainfall, the temporal confusion of micro-habitats may lead to decrease in the number of species and induce reduced number of diversity as well as cause simplification in the community structure. Therefore, erosion control structures in torrent cause influence on the habitual ecosystem, though there are differences in the degree per distance depending on the types and heights of the structure. Before establishing torrent erosion control structure in mountainous torrent area, ecosystem status should be studied carefully from the planning stage and torrent habitats should be protected by deciding type, height and scale of structure, to minimize the influence on local habitants.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.744-750
• /
• 1998

Unlike common device, MEMS(micro-electro-mechanical system) device consists of very small mechanical structures which determine the performance of the device. Because of its small mechanical structure inside. MEMS device is very sensitive to thermal stress caused by CTE(coefficient of thermal expansion) mismatch between its components. Therefore, its characteristics are affected by material properties. process temperature. and dimensions of each layer such as chip, adhesive and substrate. In this study. we investigated the change of the thermal stress in the chip attached to a substrate. With computer-aided finite element method (FEM), the computer simulation of the thermal stress was conducted on variables such as bonding material, process temperature, bonding layer thickness and die size. The commercial simulation program, ABAQUS ver5.6, was used. Subsequently 3-layer test samples were fabricated, and their degree of bending were measured by 3-D coordinate measuring machine. The experimental results were in good agreement with the simulation results. This study shows that the bonding layer could be the source of stress or act as the buffer layer for stress according to its elastic modulus and CTE. Solder adhesive layer was the source of stress due to its high elastic modulus, therefore high compressive stress was developed in the chip. And the maximum tensile stress was developed in the adhesive layer. On the other hand, polymer adhesive layer with low elastic modulus acted as buffer layer, and resulted in lower compressive stress. The maximum tensile stress was developed in the substrate.