• Korean Journal of Veterinary Research
• /
• v.5 no.1
• /
• pp.1-16
• /
• 1965

I. A Comparison of Sodium Sulfate Precipitation and Zone(Paper, Agar) Electrophoresis; Many kinds of techniques have been used for fractionating serum proteins. In the present study, using bovine serum, the fractions obtained with sodium sulfate were compared with those determined by zone electrophoresis. 1. Fibrinogen was precipitated with 4 to 10 percent of sodium sulfate. 2. ${\gamma}$-globulin required 10 to 16 percent of the salt for precipitation. 3. ${\beta}$-globulin began to precipitate at 12 percent sodium sulfate, and completed precipitation at approximately 26 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. 4. ${\alpha}$-globulin completed precipitation at 13 to 28 percent sodium sulfate in paper electrophoresis and at 22 percent in agar electrophoresis. 5. Albumin began to precipitate at 14 percent of the salt, and was free from the mixture of globulins approximately at 28 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. The results of comparing fractions by the two methods were as follows: 1. Euglobulin (15%) was equal to the sum of the most ${\gamma}$-globulin and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. 2. Pseudoglobulin I (15-17.5%) corresponded to the most ${\alpha}$-, ${\beta}$-globulins and a small quantity of albumin. 3. Pseudoglobulin II(18-22%) was a mixture of the ${\alpha}$-, ${\beta}$-globulins and albumin fraction. 4. Albumin (above 22%) contained the most albumin fraction separated by zone electrophoresis and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. As mentioned above the fractions obtained with sodium sulfate were a mixture of the various proportion of the fractions determined by zone electrophoresis. The solubility of serum fractions to sodium sulfate coincided with the mobility of those by zone electrophoresis. (By percent of sodium sulfate we mean gram of sodium sulfate contained in $100m{\ell}$ of solution). II. Immunological Studies on Serum Protein Fractions with Sodium Sulfate; In the previous report the fractions of bovine serum protein with sodium sulfate compared with those obtained by zone electrophoresis, and the findings were that the former contained various proportion components of the latter. In this study the author studied whether or not the fractions with sodium sulfate are simple component antigenically by immunoelectrophoresis and micro double diffusion test (Immuno-precipitation), using rabbit antiserum to bovine serum. In immunoelectrophoresis, normal bovine serum developed with rabbit antibovine serum showed about ten distinct precipitin arcs. The distribution of these arcs was as follows: 1 albumin, 2 ${\alpha}_1$-, 3 ${\alpha}_2$-, 2 ${\beta}_1$-, ${\beta}_2$-, and 1 ${\gamma}$-globulin (Fig. 7, 9). In micro double diffusion test, five to six precipitation bands could be seen between antigens and antibody, the order of the precipitation bands location is albumin, ${\alpha}$-, ${\beta}$-, and ${\gamma}$-globulin from the side of antiserum well (Fig.19). Frequently the ${\alpha}$-, and ${\beta}$-precipitation bands were separated into two or three precipitation bands, which indicated that these globuline are not a pure component antigenically as shown in immuno-electrophoresis. In both Immunological methods, the two ${\alpha}$-, ${\beta}$-precipitin arcs and bands appeared clear and strong, indicating that the two globulins reacted as strong antigens. The precipitate reaction of ${\gamma}$-globulin was shown at 12 to 16 percent sodium sulfate; ${\beta}$-globulin at 12 to 20 percent; ${\alpha}$-globulin at 12 to 22 percent (immuno-electrophoresis), at 12 to 26 percent (Diffusion); and albumin at above 22 percent. Antigenically euglobulin contained ${\gamma}$-, ${\beta}$-, and ${\alpha}$-globulins, Pseudoglobulin I and Pseudoglobulin II were composed of ${\alpha}$-, and ${\beta}$-globulins, and albumin was a mixture of ${\alpha}$-globulin and albumin determined by zone electrophoresis. The results indicated that the fractions of serum protein obtained by either method were constituents of various proteins antigenically except ${\gamma}$-globulin and albumin by Zone electrophoresis.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.723-737
• /
• 2021

This study analyzed the composition and structure of materials with Buddhist paper scriptures excavated from architectural sites in 'Sum Tolgoi' of the 17^th century and carried out conservation treatment base on the result of the analysis. The scriptures were covered in dust and foreign sub stances, and were so crumpled that it was impossible to identify the form. The damage, loss, and discoloration have been identified. Buddhist scriptures written in Tibetan used indigo and ink sticks on paper as a result of UV-Vis analysis, and ink sticks as black character materials from scriptures written ancient Mongolian. SEM-EDS and Micro-XRF analyses revealed that the outlines were drawn with red lines using a mix of Minium (Pb₃O₄) and Cinnabar (HgS), or Cinnabar (HgS) alone, and the contents of the scriptures were written with silver paint. Silver chloride (AgCl) and Calcium (Ca) were identified in the silver paint component of the characters, while Calcium and Orpiment (As₂S₃) were identified in the yellow lines. Concerning the paper ground, Buddhist scriptures written in ancient Mongolian were characterized by herbal plant fiber and bast fiber, and those written in Tibetan, by bast fiber. Radiocarbon dating indicates that the paper for the scriptures was produced between the 15^th and 17^th centuries. Conservation treatment of the scriptures was carried out based on the experiment on the production of pre-coated paper and how to coat that to prevent the second damage due to the deformation and fragility of the excavated paper. The scriptures were preserved and mounted, and a neutral box was made to identify the contents of the scriptures recorded on both sides after the treatment. This conservation treatment is the result of a study that applied new conservation treatment materials and methods according to the principle of conservation treatment reversibility.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.2
• /
• pp.1-8
• /
• 2012

This paper presents the accelerometer which is a key component of TPMS(Tire Pressure Monitoring System). Generally a piezoresistive accelerometer has characteristics of lower cost, better linearity and better immunity about the environmnet noise than a capacitive one. Three types of piezoresistive accelerometers are degined and simulated using ANSYS program. The best one is a piezoresistive sensor which is supported by four beams located at the center of the edge of the mass after comparing the characteristics of resonant frequency of the three types. Considering the sensor size and a simulated maximum stress and maximum displacement, the length of beams is set as $200{\mu}m$. The size of a piezoresistive accelerometer is $3.0mm{\times}3.0mm{\times}0.4mm$. The sensor output is characterized by measuring the output characteristic depending on angle. As a result the offset voltage of the accelerometer is 43.2 mV and its sensitivity is $42.5{\mu}V/V/g$. The temperature bias drift is measured. The shock durability of the sensor is 1500g and the measuring range is 0 ~ 60 g.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.11
• /
• pp.35-43
• /
• 2016

In this study, by using a Effective Microorganisms Brewing Cycle, it confirmed the purification effect of pollutants that are adsorbed on the basins stench removal and retarding soil. On the basis of on-site application test, a soil decontamination system will be suggested. Using a Effective Microorganisms Brewing Cycle, the odor concentration is reduced 2.5 times than that of natural purification treatment method. It was measured and found that the quality of the pore water discharged from the soil is improved. In addition, it was found that a composite of copper and lead with the fermentation microorganisms adsorbed on soil particles from the surface of the stirred experiments lagoon mixed soil is reduced to 65% and 66%, respectively, The TPH organic component was confirmed that the reduction effect of 85%. Restoration of reservoir contaminated soils using the effective microorganism brewing cycle needs to be more developed and implemented as a long-term purification system. This study may be a good reference of developing more complete microorganism brewing system which will efficiently reduce the odor and soil contamination based on optimal stirring and mixing ratio of the compound solutions and contaminated soils in reservoir.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.769-774
• /
• 2005

Fluosilicic acid(H2SiF6) is recovered as an aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded H3PO4 or HF. Generally, fluosilicates are the salts produced by the reaction of H2SiF6 and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. This study was performed to know mechanical properties and watertightness using fluosilicates based composite made from fluosilicates and other compounds. Mix proportions for experiments were modulated at 0.45 of water to cement ratio and $0.0-2.0\%$ of adding ratio of fluosilicates based composite. Evaluation for mechanical properties of concrete was conducted to know fresh state of concrete, hardening state of concrete, and watertightness. Evaluation for watertightness of concrete was carried out permeability, absorption test and porosity analysis. In addition. Scanning Electron Microscopy(SEM) and Energy Dispersive X-Ray(EDX) used for investigating micro-structure and atomic component distributed in hardened concrete. It is ascertained that characteristics of mechanical properties and watertightness was more improved than non-added because of packing role of fluosilicates based composite and pozzolanic reaction of soluble $SiO_2$. Also, concrete added fluosilicates based composite had a tendency to delay setting time and only $0.5\%$ addition of fluosilicates based composite delayed 150 minutes compared with non-added.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2014

Generally, the nonlinearity of ultrasonic waves is measured using a nonlinear parameter ${\beta}$, which is defined as the ratio of the second harmonic's magnitude to the power of the fundamental frequency component after the ultrasonic wave propagates through a material. Nonlinear parameter ${\beta}$ is recognized as an effective parameter for evaluating material degradation. In this paper, we evaluated the nonlinear parameter of Al6061-T6 which had been subjected to an artificial aging heat treatment. The measurement was using the transmitted signal obtained from contact-type transducers. After the ultrasonic test, a micro Vickers hardness test was conducted. From the result of the ultrasonic nonlinear parameter, the microstructural changes resulting from the heat treatment were estimated and the hardness test proved that these estimates were reasonable. Experimental results showed a correlation between the ultrasonic nonlinear parameter and microstructural changes produced by precipitation behavior in the material. These results suggest that the evaluation of mechanical properties using ultrasonic nonlinear parameter ${\beta}$ can be used to monitor variations in the mechanical hardness of aluminum alloys in response to an artificial aging heat-treatment.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.55-60
• /
• 2015

Melittin is the main component of Bee Venom and has antibacterial activity against several bacteria. To produce the melittin antimicrobial peptide, we constructed transgenic silkworm that expressed melittin gene under the control BmA3 promoter using piggyBac vector. The use of the 3xP3-driven EGFP cDNA as a marker allowed us to rapidly distinguish transgenic silkworm. Mixtures of the donor vector and helper vector were micro-injected into 300 eggs of bivoltin silkworms, Baegokjam. In total, 131 larvae (G0) were hatched and allowed to develop into moths. The resulting G1 generation consisted of 36 broods, and we selected 4 broods containing at least 1 EGFP-positive embryo. The rate of successful transgenesis for the G1 broods was 11%. We identified 12 EGFP-positive G1 moths and these were backcrossed with wild-type moths. With the aim of identifying a melittin as antimicrobial peptide, we investigated the Radical diffusion Assay (RDA) and then demonstrated that melittin possesses high antibacterial activities against gramnegative bacteria.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.51-62
• /
• 2006

This study, in order to do a nondestructive research on the mural walls kept in the protective house in Muwisa Temple, Kangjin, took four examinations; particle size analysis, XRD analysis, ultrasonic investigation, and thermo-infrared investigation. Component ratio of mural wall varied; clay of wall bodies consisted of gravel of 1.78 g, sand of 5.39 g, silt of 4.91 g and clay of 6.26 g. Ultrasonic velocity and one-axis compression strength tests done with eight mural-painted walls yield results as follows; the value of ultrasonic velocity ranged between 71.63 and 3610.11 m/s with the average of 417.44 m/s and on-axis compression strength ranged between 70.34 and $533.28kg/cm^2$ with the average of $83.23kg/cm^2$. The value increased in the order of Bosaldo(No.6)

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.174-181
• /
• 2007

In this study, $SiO_2/poly(ethylene-co-vinyl$ alcohol)(EVOH) hybrid coating materials with gas barrier property could be produced using sol-gel method. The biaxially oriented polypropylene (BOPP) substrate with surface pretreatment was coated with the prepared hybrid sols containing various inorganic silicate component by a spin coating method. Crystallization behavior of the hybrids was investigated in terms of analysis of X-ray diffraction and cooling thermogram from DSC experiment. From the morphological observation of the $SiO_2/EVOH$ hybrid gel, it was confirmed that there existed an optimum content of inorganic silicate precursor, Tetraethylorthosilicate (TEOS), to produce hybrid materials with dense microstructure, exhibiting uniformly dispersed silica particles with average size below 100 nm. When TEOS was added at below or above the optimum content, particle clusters with large domain were observed, resulting in phase separation. This morphological result was found to be in good agreement with that of oxygen permeability of the hybrid coated films. In the case of film coated with hybrid prepared from addition of 0.01 - 0.02mol of TEOS, a remarkable improvement in barrier property could be obtained, however, with the addition of TEOS more than 0.04 mol, the barrier property was dramatically reduced because of phase separation and micro-crack formation on the film surface.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.175-181
• /
• 2009

Holographic lithography is one of the potential technologies for next generation lithography which can print large areas (6") as well as very fine patterns ($0.35{\mu}m$). Usually, photolithography has been developed with two target purposes. One was for LCD applications which require large areas (over 6") and micro pattern (over $1.5{\mu}m$) exposure. The other was for semiconductor applications which require small areas (1.5") and nano pattern (under $0.2{\mu}m$) exposure. However, holographic lithography can print fine patterns from $0.35{\mu}m$ to $1.5{\mu}m$ keeping the exposure area inside 6". This is one of the great advantages in order to realize high speed fine pattern photolithography. How? It is because holographic lithography is taking holographic optics instead of projection optics. A hologram mask is the key component of holographic optics, which can perform the same function as projection optics. In this paper, Surface-Relief TIR Hologram Mask technology is introduced, and enables more robust hologram masks than those previously reported that were formed in photopolymer recording materials. We describe the important parameters in the fabrication process and their optimization, and we evaluate the patterns printed from the surface-relief TIR hologram masks.