• 제목/요약/키워드: micro-CT

검색결과 421건 처리시간 0.033초

평판 디텍터 기반 마이크로 CT시스템을 위한 Ring Artifact 보정 방법 (A Ring Artifact Correction Method for a Flat-panel Detector Based Micro-CT System)

  • 김규원;이수열;조민형
    • 대한의용생체공학회:의공학회지
    • /
    • 제30권6호
    • /
    • pp.476-481
    • /
    • 2009
  • The most troublesome artifacts in micro computed tomography (micro-CT) are ring artifacts. The ring artifacts are caused by non-uniform sensitivity and defective pixels of the x-ray detector. These ring artifacts seriously degrade the quality of CT images. In flat-panel detector based micro-CT systems, the ring artifacts are hardly removed by conventional correction methods of digital radiography, because very small difference of detector pixel signals may make severe ring artifacts. This paper presents a novel method to remove ring artifacts in flat-panel detector based micro-CT systems. First, the bad lines of a sinogram which are caused by defective pixels of the detector are identified, and then, they are corrected using a cubic spline interpolation technique. Finally, a ring artifacts free image is reconstructed from the corrected projections. We applied the method to various kinds of objects and found that the image qualities were much improved.

특징 추출을 이용한 다중 영상 정합 및 융합 연구 (Multimodality Image Registration and Fusion using Feature Extraction)

  • 우상근;김지현
    • 한국컴퓨터정보학회논문지
    • /
    • 제12권2호
    • /
    • pp.123-130
    • /
    • 2007
  • 본 논문에서는 소동물 생체내 실험시 서로 다른 장비에서 획득된 영상의 융합 및 정합을 위한 방법을 제안한다. 마우스의 꼬리 정맥에 $[[^{18}F]FDG$를 주사하여 60분 섭취후 서로 다른 장비에서 동일한 위치의 영상을 획득하기 위하여 아크릴 재질의 소동물 가이드에 기준마크를 설정하고 microPET과 CT 영상을 획득하였다. MicroPET으로 획득된 리스트모드(list-mode) 데이터는 Fourier Rebinning(FRB) 방법을 사용하여 사이노그램(Sinogram)으로 변환 후 4 번의 반복횟수를 가지는 Ordered Subset Expectation Maximization(OSEM) 알고리즘으로 재구성하였다. MicroPET 영상획득후 PET/CT의 CT를 이용하여 CT영상을 획득하였다. MicroPET 영상에서 폐영역을 정확히 찾아내는 어려움이 있어. 해부학적 정보를 제공하는 CT 영상을 이용하여 폐 영역을 구분하였다. 영상 융합을 위한 불일치 부분을 해결하기 위하여 기준마크의 정보와 폐 영역의 정보를 이용하여 회전과 이동정보를 가지는 어파인 (affine) 변환 행렬 구하여 영상 정합에 사용하였다. 이 방법은 정량적 정확성과 영상 해석의 정확성을 개선할 것으로 기대된다.

  • PDF

Micro-computed tomography in preventive and restorative dental research: A review

  • Ghavami-Lahiji, Mehrsima;Davalloo, Reza Tayefeh;Tajziehchi, Gelareh;Shams, Paria
    • Imaging Science in Dentistry
    • /
    • 제51권4호
    • /
    • pp.341-350
    • /
    • 2021
  • Purpose: The use of micro-computed tomography (micro-CT) scans in biomedical and dental research is growing rapidly. This study aimed to explore the scientific literature on approaches and applications of micro-CT in restorative dentistry. Materials and Methods: An electronic search of publications from January 2009 to March 2021 was conducted using ScienceDirect, PubMed, and Google Scholar. The search included only English-language articles. Therefore, only studies that addressed recent advances and the potential uses of micro-CT in restorative and preventive dentistry were selected. Results: Micro-CT is a tool that enables 3-dimensional imaging on a small scale with very high resolution. In this method, there is no need for sample preparation or slicing. Therefore, it is possible to examine the internal structure of tissue and the internal adaptation of materials to surfaces without destroying them. Due to these advantages, micro-CT has been recommended as a standard imaging tool in dental research for many applications such as tissue engineering, endodontics, restorative dentistry, and research on the mineral density of hard tissues and bone growth. However, the high costs of micro-CT, the time necessary for scanning and reconstruction, computer expertise requirements, and the enormous volume of information are drawbacks. Conclusion: The potential of micro-CT as an emerging, accurate, non-destructive approach is clear, and the valuable research findings reported in the literature provide an impetus for researchers to perform future studies focusing on employing this method in dental research.

CBCT-based assessment of root canal treatment using micro-CT reference images

  • Lamira, Alessando;Mazzi-Chaves, Jardel Francisco;Nicolielo, Laura Ferreira Pinheiro;Leoni, Graziela Bianchi;Silva-Sousa, Alice Correa;Silva-Sousa, Yara Terezinha Correa;Pauwels, Ruben;Buls, Nico;Jacobs, Reinhilde;Sousa-Neto, Manoel Damiao
    • Imaging Science in Dentistry
    • /
    • 제52권3호
    • /
    • pp.245-258
    • /
    • 2022
  • Purpose: This study compared the root canal anatomy between cone-beam computed tomography (CBCT) and micro-computed tomography (micro-CT) images before and after biomechanical preparation and root canal filling. Materials and Methods: Isthmus-containing mesial roots of mandibular molars(n=14) were scanned by micro-CT and 3 CBCT devices: 3D Accuitomo 170 (ACC), NewTom 5G (N5G) and NewTom VGi evo (NEVO). Two calibrated observers evaluated the images for 2-dimensional quantitative parameters, the presence of debris or root perforation, and filling quality in the root canal and isthmus. The kappa coefficient, analysis of variance, and the Tukey test were used for statistical analyses(α=5%). Results: Substantial intra-observer agreement (κ=0.63) was found between micro-CT and ACC, N5G, and NEVO. Debris detection was difficult using ACC (42.9%), N5G (40.0%), and NEVO (40%), with no agreement between micro-CT and ACC, N5G, and NEVO (0.05<κ<0.12). After biomechanical preparation, 2.4%-4.8% of CBCT images showed root perforation that was absent on micro-CT. The 2D parameters showed satisfactory reproducibility between micro-CT and ACC, N5G, and NEVO (intraclass correlation coefficient: 0.60-0.73). Partially filled isthmuses were observed in 2.9% of the ACC images, 8.8% of the N5G and NEVO images, and 26.5% of the micro-CT images, with no agreement between micro-CT and ACC, and poor agreement between micro-CT and N5G and NEVO. Excellent agreement was found for area, perimeter, and the major and minor diameters, while the roundness measures were satisfactory. Conclusion: CBCT images aided in isthmus detection and classification, but did not allow their classification after biomechanical preparation and root canal filling.

MicroCT를 이용한 상악 전치의 법랑질 두께에 관한 연구 (A study on enamel thickness of maxillary incisors using X-ray micro computed tomography)

  • 조영원;조진현;이규복
    • 대한치과보철학회지
    • /
    • 제48권4호
    • /
    • pp.301-307
    • /
    • 2010
  • 연구 목적: 이번 연구의 목적은 법랑질 두께를 측정하는데 있어 microCT의 정확성을 평가하고, 한국인의 상악전치 법랑질 두께를 알아봄으로써 임상에 도움을 주고자 한다. 연구 재료 및 방법: 발거된 상악 중절치 5개를 레진 포매하여 치아 장축을 따라 정중부에서 협설로 절단하고 연마한 후에 microCT를 촬영하여 scanning electron microscope 상(${\times}20$)에서와 microCT 상에서 거의 동일한 절단면을 구현하였고, 각각 백악법랑경계 상방 1, 3, 5 mm 부위의 협측 법랑질 두께를 측정하여 microCT의 정확성을 평가하였다. 또한 상악 중절치 26개와 측절치 11개를 이용하여 각 치아의 순측 정중부와 정중부에서 근원심으로 각각 2 mm 떨어진 선상에서 백악법랑경계의 상방 1, 3, 5 mm 지점의 법랑질 두께를 측정하였다. 정중부의 세 지점에서는 정중부를 지나는 시상면에서 법랑질 표면에 접선을 그어 이 접선에 수직으로 법랑상아경계까지 수선을 내려 법랑질 두께를 측정하였고, 근원심 2 mm를 지나는 선상에 있는 6개 지점에서는 각 지점을 지나는 수평면에서 법랑질 표면에 접선을 그어 이 접선에 수직으로 법랑상아경계까지 수선을 내려 법랑질 두께를 측정하였다. 결과: 동일한 절단면에서 주사전자현미경과 microCT를 이용하여 백악법랑경계 상방 1, 3, 5 mm 지점의 순면 법랑질 두께를 측정한 값은 평균 3.81% 차이가 났으나, independent t-test 결과 두 가지 방법에 의한 측정값은 통계적으로 유의한 차이가 없었다. 상악 중절치의 정중부에서 백악법랑경계 1, 3, 5 mm 상방의 순면 법랑질 두께는 각각 $0.32{\pm}0.01$, $0.50{\pm}0.02$, $0.70{\pm}0.02\;mm$로 나타났다. 상악 측절치의 정중부에서 백악법랑경계 1, 3, 5 mm 상방의 순면 법랑질 두께는 각각 $0.30{\pm}0.01$, $0.55{\pm}0.03$, $0.80{\pm}0.02\;mm$로 나타났다. 결론: 법랑질 두께를 측정하는데 있어 microCT는 유용한 측정방법의 하나이며, 이번 연구의 결과로 볼 때 한국인의 상악전치부 도재 라미네이트 수복시 법랑질의 삭제량에 주의를 기울일 필요가 있는 것으로 사료된다.

Micro X-ray CT 촬영을 통한 세립 점성토의 간극비 추정 방법 연구 (Study on a methodology for estimation of void ratio of very fine clayey soil by using micro X-ray CT scan)

  • 허성준;김광염;권영철;김홍택;신휴성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.392-403
    • /
    • 2010
  • In this study, a new methodology by using the X-ray CT scan is proposed for estimating void ratio of very fine clayey soil. Since the particle size of the clay is too fine to calculate the volume of void inside the clays, CT scanning tests with a number of clay specimens that were artificially set to have various designated void ratios have been carried out. From the tests, a relationship between the CT values and void ratios is given to be used for estimating the invisible void ratio of very fine clay from a representative CT value scanned. The linear relationship was able to be acquired finally. It is expected that micro X-ray CT scanning can be capable of capturing the void ratio of very fine soils without any errors inherent in the conventional specific gravity tests.

  • PDF

Micro-CT를 이용한 복합 레진 수복물 미세 누출도의 정량 분석 (Quantitative Micro-CT Evaluation of Microleakage in Composite Resin Restorations)

  • 이상익;현홍근;김영재;김정욱;이상훈;김종철;한세현;장기택
    • 대한소아치과학회지
    • /
    • 제34권2호
    • /
    • pp.222-233
    • /
    • 2007
  • 치과 수복 재료 검사 시 가장 중요하고 기본적인 것은 치아와 수복물 사이의 미세누출에 대한 평가이다. 미세 누출을 평가하는 방법은 여러 가지가 있지만 이들 대부분은 많은 단점들을 가지고 있다. 최근에 개발된 미세 단층촬영법(micro-CT)을 이용하면 시편을 비파괴적으로 처리하여 특정 밀도에 해당하는 부분의 3차원적 영상을 얻을 수 있으므로, 이를 이용하면 정확하고 정량적인 미세누출 평가도 가능할 것이다. 이 연구의 목적은 micro-CT를 사용하여, 레진 수복물의 미세 누출도를 정량적이고 비파괴적으로 측정할 수 있는 새로운 방법을 찾아내고, 이 새로운 방법을 기존의 색소 침투법과 비교해보는 것이다. 이를 위해, 위의 두 가지 방법을 사용하여 두 종류의 상아질 접착 시스템의 미세누출도가 평가되었다. 사람의 건전 소구치 40개를 임의로 20개씩 두 군으로 나누고 다음과 같이 처리하였다. Group 1 : $Adper^{TM}$ Singe Bond 사용 후 제 V급 와동 레진 수복, Gourp 2 : $Adper^{TM}\;Promp^{TM}$ L-pop 사용 후 제 V급 와동 레진 수복 모든 치아의 5급 와동은 $Filtek^{TM}$ Supreme으로 수복하였다. 그 후 각 군 중 10개의 치아는 micro-CT를 사용하여 미세 누출도를 평가하고, 나머지 10개는 기존의 색소 침투법으로 평가하였다. 이 연구의 결과는 다음과 같았다. 1. Micro-CT를 사용한 경우, 1군은 2군보다 통계적으로 유의성 있게 적은 양의 미세 누출을 보였다(p<0.01). 2. 기존의 색소 침투법을 사용한 경우에서 1군은 2군보다 적은 미세누출을 보였으며 이는 통계적으로 유의성이 있었다. (p<0.01). 3. 두 군간의 미세 누출도는 micro-CT를 사용한 방법에서 더 현저한 차이를 보였다. 4. 두 가지 방법 모두에서 법랑질 변연 부분보다 상아질 변연 부분에서 더 많은 미세 누출을 보였다.

  • PDF

Unet-VGG16 모델을 활용한 순환골재 마이크로-CT 미세구조의 천연골재 분할 (Segmentation of Natural Fine Aggregates in Micro-CT Microstructures of Recycled Aggregates Using Unet-VGG16)

  • 홍성욱;문덕기;김세윤;한동석
    • 한국전산구조공학회논문집
    • /
    • 제37권2호
    • /
    • pp.143-149
    • /
    • 2024
  • 이미지 분석을 통한 재료의 상 구분은 재료의 미세구조 분석을 위해 필수적이다. 이미지 분석에 주로 사용되는 마이크로-CT 이미지는 대체로 재료를 구성하고 있는 상에 따라 회색조 값이 다르게 나타나므로 이미지의 회색조 값 비교를 통해 상을 구분한다. 순환골재의 고체상은 수화된 시멘트풀과 천연골재로 구분되는데, 시멘트풀과 천연골재는 CT이미지 상에서 유사한 회색조 분포를 보여 상을 구분하기 어렵다. 본 연구에서는 Unet-VGG16 네트워크를 활용하여 순환골재 CT 이미지로부터 천연골재를 분할하는 자동화 방법을 제안하였다. 딥러닝 네트워크를 활용하여 2차원 순환골재 CT 이미지로부터 천연골재 영역을 분할하는 방법과 이를 3차원으로 적층하여 3차원 천연골재 이미지를 얻는 방법을 제시하였다. 선별된 3차원 천연골재 이미지에서 각각의 골재 입자를 분할하기 위해 이미지 필터링을 사용하였다. 골재 영역 분할 성능을 정확도, 정밀도, 재현율 F1 스코어를 통해 검증하였다.

The evaluation of the correlation between histomorphometric analysis and micro-computed tomography analysis in AdBMP-2 induced bone regeneration in rat calvarial defects

  • Park, Shin-Young;Kim, Kyoung-Hwa;Koo, Ki-Tae;Lee, Kang-Woon;Lee, Yong-Moo;Chung, Chong-Pyoung;Seol, Yang-Jo
    • Journal of Periodontal and Implant Science
    • /
    • 제41권5호
    • /
    • pp.218-226
    • /
    • 2011
  • Purpose: Micro-computed tomography (micro-CT) has been widely used in the evaluation of regenerated bone tissue but the reliability of micro-CT has not yet been established. This study evaluated the correlation between histomorphometric analysis and micro-CT analysis in performing new bone formation measurement. Methods: Critical-size calvarial defects were created using a 8 mm trephine bur in a total of 24 Sprague-Dawley rats, and collagen gel mixed with autogenous rat bone marrow stromal cells (BMSCs) or autogenous rat BMSCs transduced by adenovirus containing bone morphogenic protein-2 (BMP-2) genes was loaded into the defect site. In the control group, collagen gel alone was loaded into the defect. After 2 and 4 weeks, the animals were euthanized and calvaria containing defects were harvested. Micro-CT analysis and histomorphometric analysis of each sample were accomplished and the statistical evaluation about the correlation between both analyses was performed. Results: New bone formation of the BMP-2 group was greater than that of the other groups at 2 and 4 weeks in both histomorphometric analysis and micro-CT analysis (P=0.026, P=0.034). Histomorphometric analysis of representative sections showed similar results to histomorphometric analysis with a mean value of 3 sections. Measurement of new bone formation was highly correlated between histomorphometric analysis and micro-CT analysis, especially at the low lower threshold level at 2 weeks (adjusted $r^2=0.907$, P<0.001). New bone formation of the BMP-2 group analyzed by micro-CT tended to decline sharply with an increasing lower threshold level, and it was statistically significant (P<0.001). Conclusions: Both histomorphometric analysis and micro-CT analysis were valid methods for measurement of the new bone in rat calvarial defects and the ability to detect the new bone in micro-CT analysis was highly influenced by the threshold level in the BMP-2 group at early stage.