• 전기학회논문지
• /
• 제65권4호
• /
• pp.622-627
• /
• 2016

This paper describes the development of a portable potentiostat which can perform square wave voltammetry on electrochemical sensors and wireless transmission of the measured data to a smartphone using Bluetooth. The potentiostat consists of a square wave potential pulse generation circuit for applying the potential pulse to the electrochemical sensor, a reduction/oxidation (or redox) current measurement circuit, and Bluetooth for wireless data transmission to an Android-based smartphone. The measured data are then processed to show the output graph on the smart phone screen in real time. This data transformation into a graph is carried out by developing and installing a simple transformation application software in the Android-based smartphone. This application software also enables the user to set and change the measurement parameters such as the applied voltage range and measured current range at user's convenience. The square voltammetry output data measured with the developed portable potentiostat were almost same as the data of the commercial potentiostat. The measured oxidation peak current with the commercial potentiostat was $11.35{\mu}A$ at 0.26 V and the measured oxidation peak current with the developed system was $12.38{\mu}A$ at 0.25 V. This proves that performance of the developed portable measurement system is comparable to the commercial one.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.115-120
• /
• 2005

As a popularity of a portable digital device such as a cellular phone, a digital camera and a MP3 player is spreading, the demand of the mobile storage device increases rapidly. A bluray technology using 405nm laser diode and objective lens having high NA(Numerical Aperture), 0.85, satisfies a miniaturization and a high capacity which are the requirements of the portable device. To develop SFFOP(small form factor optical pickup), it is prerequisite to minimize the number of optical components and establish evaluation and assembly method of micro optical pickup system as well as mass production method of micro optical component. To minimize optical elements of optical pickup, there have been many researches to use P-HOE(Polarized Holographic Optical Element) due to its extremely small size and versatile function. However, P-HOE is handled and assembled very accurately in SFFOP. In this paper, static error signal detection method is developed for an alignment of P-HOE in SFFOP. Using developed static error signal detection method, P-HOE can be aligned very accurately with real time result of static error signals of pickup such as FES(focusing error signal) and TES(Tracking Error Signal). The developed static error signal detection method is verified by the evaluation of commercialized DVD Pickup. And finally. developed static error signal detection method is applied for the assembly of P-HOE in SFFOP system satisfies specification of BD(Blu-ray Disk).

• 한국정보통신학회논문지
• /
• 제23권11호
• /
• pp.1397-1406
• /
• 2019

신경학적 손상에 의한 언어장애인/비장애인 간의 일상적인 휴대폰 통화시 신경학적 손상으로 인한 발음의 정확도와 언어장애인의 발음 특징이 결합되어 원활한 의사소통을 저해하는 경우가 많다. 이러한 문제점을 개선하기 위하여 제한하는 방법은 언어장애인 특성에 맞춘 단어의 모호성(out of vocabulary) 개선과, 언어 장애인 구강 특성에 따른 어려운 발성 부분을 인위적으로 보정해주는 유도선이 포함된 MEMS(Micro Electro-mechanical System) Microphone 장치 개선이다. S/W적 개선은 도치기능이 포함된 결정트리이며, 연속어 특성을 감안하여 개선된 matrix-vector rnn 방법을 제시하였다. H/W와 S/W 특성을 감안하여 유사 사전을 만들어 원활한 의사소통을 위한 말명료도 향상에 기여하였다.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.11-16
• /
• 2008

In order to satisfy the customer's variant needs for a product quality in recent years, a demand for developing higher precision machining technologies in a lot of application areas such as automobile, cellular phone and semiconductor has been increased more and more. Micro-magnetic induced polishing(${\mu}-MIP$) process is one of these precision technologies. In this study, to verify the parameters' effect of the ${\mu}-MIP$ process on the surface roughness improvement of the inclined workpiece, well planned experiment which was called the design of experiments was carried out. Considered parameters were spindle speed, inductor current, abrasive configuration and working gap between the workpiece and the solid tool. As a result, it was seen that the inductor current and the working gap greatly affected the surface roughness improvement. And to predict the surface roughness of the inclined workpiece, S/N ratio and first-order response surface model was developed.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.46-51
• /
• 2005

The vacuum cleaner motor runs at very high speed for suction power. Specially, motor power is provided by the impeller being rotated at very high speed. The centrifugal fan consists of the impeller, the diffuser, and the circular casing. Due to the high rotating speed of the impeller and small gap distance between the impeller and the diffuser, the level of noise in the centrifugal fan is at BPF(Blade Passage Frequency) and its harmonic frequencies. In order to calculate the sound pressure of centrifugal fan, unsteady flow data are needed. The cause of noise is obtained by dividing the fluid noise by exhaust flow of fan and vibration noise by rotational vibration of vacuum cleaner fan motor. Until now, an accelerometer has been used to measure vibration. However, it can not measure vibration in some parts of brush and commutator because of motor construction and 3-D vibrating mode. This study was conducted to perform accurate analysis of vibration and aerodynamic sound for fan motor in a vacuum cleaner using a laser vibration analyzer. A silent fan motor can be designed using the data measured in this study.

• 소성∙가공
• /
• 제20권3호
• /
• pp.193-205
• /
• 2011

Because of its rustproof property, stainless steel is widely used in kitchen appliances, building materials, electronics, chemical plants and automobile exhausts. In addition, the utilization of stainless steel for fuel cell application is growing. As the demand for this material increases, it is necessary to study the basic properties of stainless steel such as corrosion resistance, heat transfer, formability, cutting or shearing ability and weldability. In this article, the mechanical properties, formability and press forming performance of stainless steel are reviewed. Since temperature and strain rate affect the press forming performance of STS304(austenitic) stainless steel, the influence of these parameters on the plastic behavior should be investigated. Moreover, measures for the prevention of ridging of STS430(ferritic) and delayed fracture of STS430, which respectively appear during and after press forming, should be considered. Recently, stainless steel sheets with a thickness lower than 0.2 mm have been widely used in applications for mobile phone, digital camera and fuel cell separator. Therefore, there is a growing interest of studying the grain size effect and plasticity at the crystal scale in order to understand the anisotropic behavior and micro forming ability of thin sheets. This review paper was written with the objective of helping engineers and researchers to understand the forming characteristics of stainless steel and to establish standards in plastic forming techniques.

• 산업경영시스템학회지
• /
• 제33권4호
• /
• pp.130-137
• /
• 2010

This paper analyzes the main factors affecting user selection of a small-sum electronic payment system using survey data of 396 users. Several findings emerge. First, users consider three pillars and eight factors in adopting a new system : system features(stability, security, and flexibility), transaction cost(payment commission and settlement period), and financial capability of provider(stability of financial structure, risk management capability, and funding capability). Second, the stability of the financial structure of the system provider is the most important factor to user acceptance of a new e-payment system. Users tend to consider uncertainty risk more seriously than transaction cost. This reflects the reality that electronic payment system service industry has not fully fledged yet. Third, some moderating effects exist according to payment methods and business usages. As for payment methods, speedy settlement cycle for wired/wireless phone payment, system stability for credit card and account transfer payment, and security for advance payment means are crucial factors. As for business usages, the stability of financial structure for online game content, system stability for music and video content, proxy payment commission for e-learning content, flexibility of the payment system for digital adult content, and security for public services are decisive ones.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.43-49
• /
• 2003

Low-temperature polysilicon (LTPS) technology has continued to mature with the passing of each year since LTPS mass production began. The integration of complex circuits has become possible with advances in microprocessing, leading to the realization of panels with highly advanced functions. At the same time, efforts have been made to meet market demands for lower costs, thereby boosting competitive strength. Today, LTPS-TFT LCDs have become standard equipment for the monitors of digital still cameras, and inroads are being made into the massive cellular phone market. Micro displays such as electronic viewfinders, which were previously only possible with high-temperature polysilicon technology, can now also be made with LTPS, thus expanding the scope of the technology. AMOLED displays using the LTPS-TFT as a back plane are also approaching the stage of industrialization. The hidden potential for the OLED to replace the familiar LCD has prompted Widespread anticipation for this emerging technology. This paper reflects on the history of LTPS technology, then looks forward to its future prospects and suggests a variety of potential fields of application.

• 방송공학회논문지
• /
• 제20권6호
• /
• pp.928-937
• /
• 2015

기존의 헤드업 디스플레이는 작은 허상 크기로 인하여 운전자가 영상 정보를 쉽게 인식할 수 없는 어려움을 가지고 있기 때문에, 본 연구에서는 수평 방향으로 영상을 넓히는 다중 화면 구조와 컴바이너 렌즈를 사용하여 영상 확대와 다채널 윈도우 구조의 헤드업 디스플레이를 연구하였다. 0.47inch 크기의 LCD를 사용하여 투과와 반사 기능의 허상 영상을 사람의 눈에서 3m 위치에 구현하는 기술을 연구하여 근거리와 원거리의 물체에 대한 운전자의 인지 시간을 짧게 하였다. 허상 영상의 콘텐츠로는 스마트 폰을 이용하여 다양한 내비게이션 정보 등을 디스플레이 할 수 있도록 하여 안전과 정보를 동시에 제공할 수 있도록 하였다.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.86-93
• /
• 2004

This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.