• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.71-74
• /
• 2007

Substitution of the stacked antenna for the normally pressed antenna in the mobile phone was tried for the purpose of decreasing its size. However, reduced size resulted in the difficulties obtaining the targeted characteristics with the bandwidth over 70MHz. The cross-section of the vias in the low temperature co-firing ceramics process was studied to find out effects on the bandwidth characteristics. Circular and rectangular cross-section of the via beneath different types of antenna patterns were simulated. Better bandwidth characteristics were acquired for the larger diameter of the circular section and for the rectangular section as the cross-section area increased. From the viewpoint of the shape of the cross-section, rectangular area showed better characteristics than the circular area with the same longest length in the cross-section.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.101-104
• /
• 2000

Milli-structure components are classified as component group whose size is between macro and micro scale. that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In order to conventional metal forming, where numerical process simulation is already idly applied, the micro-forming process is characterized by some scale effects which have to be considered in an advanced process simulation. milli-structure rectangular cup drawing is analyzed and designed using the finite element method and experiment. The result of the finite element analysis is confirmed by a series of experiment.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.108-111
• /
• 2006

Recently, mobile information devices, such as cellular phone, PDA(Personal Digital Assistant, PDA) are getting smaller and thinner. Accordingly, ultra precision welding technology is required to manufacture the high performance system for use in the telecommunication industry. In this study, we propose the laser micro welding process. Using ytterbium fiber laser, a wide range of experiments have been carried out for the gold wire-to-gold thin film welding.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.265-272
• /
• 2001

In case of implementing a complicated application like WAP (Wireless Application Protocol) in a mobile terminal with the characteristics of bare machine and versatile kernel aspects of which are control, interrupt and IPC(Inter Process Communication), a special methodology should be needed. If not, it will cause more cost and human resources, even delayed product into launching for the time-to-market. This paper suggests AKL, (Abstract Kernel Layer) for the design and implementation of WAP on basis of multi-platform. AKL is running on the various kernel including REX, MS-DOS, MS-Window, UNIX and LINUX. For the purpose of it, AKL makes machine-dependant features be minimized and supports a consistent interface on API (Application Program Interface) point of view. Therefore, it makes poring times of a device be shorten and makes easy of maintenance. We validated our suggestion as a consequent of porting WAP into PlamV PDA and mobile phone with AKL.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.259-266
• /
• 2017

GPS was developed for military purposes. As a result, it is used as a military important means such as guided weapons and strategy / tactics. However, GPS depends on the communication infrastructure and is affected by interference signals. In this paper, we propose a secure micro - web page - based smart map that can enhance security without relying on communication infrastructure on the battlefield. The proposed system consists of general smartphone, security QR, central server and smart map. Only use the network when downloading the security key and SmartMap before the task starts. During operation, the smartphone transmits and receives data using a secure QR. The security QR inserts the security code to prevent forgery and falsification and confirms whether the data is authentic by checking whether the smart phone is forged or not. As a result of implementation, we solved communication security problem of existing technology by using location based service without relying on communication infrastructure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.63-63
• /
• 2008

Environmental monitoring sub-system has been developed using gas sensor module, Bluetooth module and PDA phone. The gas sensor module consists of $NO_2or$ CO gas sensor and signal processing chips. Gas sensor is composed of the micro-heater, sensing electrode and sensing material. Metal oxide nano-material was selectively deposited on a substrate with micro-heater and was integrated to the gas sensor module. The change in resistance of the metal oxide nano-material due to exposure of oxidizing or deoxidizing gases is utilized as the principle of this gas sensor operation mechanism. This variation detected in the gas sensor module was transferred to the PDA phone by way of Bluetooth module.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.11-16
• /
• 2011

Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.808-811
• /
• 2007

Aspheric glass lens have recently been used in camera phone module because they are more effective than spherical ones. In this paper, the grinding condition of the tungsten carbide molding core has been found after applying DOE to the development of the aspheric glass lens for the 3 Megapixel and 2.5x camera-phone module. Also, the ultra precision grinding process was investigated under this condition by experiment. Re-Ir coating was applied on the ground surface of the tungsten carbide molding core. The influence of Re-Ir coating on the form accuracy and surface roughness of molding core was compared and evaluated. The form accuracy and surface roughness of the molding core were improved by application of Re-Ir coating on the surface of the tungsten carbide molding core.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.473-476
• /
• 2012

Energy is one of the most important resources for human society and the history of its development and use have been part of human life. Especially as the need of eco-friendly energy development has been on the rise, the interest in alternative energy has grown consistently. This paper, so as to identify the energy output and efficiency from a micro vertical-axis wind generator. by utilizing a smart phone, presents a system to analyze the production efficiency of real-time energy, according to the wind velocity and the width and the material of the blade of the climate change system in the Meteorological Office.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.187-193
• /
• 2004

For a power source of usual electronic devices such as PDA, smart phone, UPS and electric vehicle, the battery made of serially connected multiple cells is generally used. In this case, if there are some unbalanced among cell voltages, the total lifetime and the total capacity of the battery are limited to a lower value. To maintain a balanced condition in cells, an effective method of regulating the cell voltage in indispensable. In this paper, we propose the design of a balancing circuit for electronic appliances. The balancing system was controlled by a micro-controller which enables to implement the balancing action during charging period. Proposed method has been verified by the experiment using the charger and recorder. The experimental results show that the individual battery equalization can improve battery capacity and battery lifetime and performance through an extended operational time.