• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.296-303
• /
• 2008

In this paper, we propose a novel Route_Reconf message as the RSVP message to maintain an RSVP session for hard handoff and consider a path-comparing route(PCR) algorithm to find an intermediate node in the charge of down-link re-establishment. And, we consider information form each mode for the PCR algorithm, which also reduces the frequency and amount of exchanged RSVP message to minimize packet loss and delay between an intermediate node and a receiver. According to the proposed algorithm, a new support node(NSN) and an existing support node(ESN) along the RSVP path can be found; the former is a supporting RSVP session node newly searched and the latter is the last supporting node holding the previous session after handoff. On receiving the Route_Reconf message at the ESN, a new allocated route from a NSN to the MN waiting for the handoff via a new access router is configured by the ESN.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.6 s.348
• /
• pp.46-52
• /
• 2006

We report on a high performance 94 GHz MMIC resistive mixer using 70-nm metamorphic high electron mobility transistor (MHEMT) and micro-machined W-band ring coupler. A novel 3-dimensional structure of resistive mixer was proposed in this work, and the ring coupler with the surface micro-machined dielectric-supported air-gap microstrip line (DAMLs) structure was used for high LO-RF isolation. The fabricated mixer showed an excellent LO-RF isolation of -29.3 dB and a low conversion loss of 8.9 dB at 94 GHz. To our knowledge, compared to previously reported W-band mixers, the proposed MHEMT-based resistive mixer using micro-machined ring coupler has shown superior LO-RF isolation as well as similar conversion loss.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.573-586
• /
• 2008

The improved performance and miniaturization of computer and the improvement of wireless communication technology have enabled the emergence of many high quality services. Among them multicast services are receiving much attention and their usage is increasing due to the increase of Internet multimedia services such as video conference, multimedia stream, internet TV, etc. Security plays an important role in mobile multicast services. In this paper, we proposed a secure multicast protocol for a hierarchical micro-mobility environment. The proposed secure multicast protocol provides security services such as authentication, access control, confidentiality and integrity using mechanisms including symmetric/asymmetric key crypto-algorithms and capabilities. To provide forward/backward secrecy and scalability, we used sub-group keys based on the hierarchical micro-mobility environment. With this security services, it is possible to guard against all kinds of security attacks performed by illegal mobile nodes. Attacks executed by internal nodes can be thwarted except those attacks which delete packet or cause network resources to be wasted. We used simulator to measure the performance of proposed protocol. As a result, the simulation showed that effect of these security mechanisms on the multicast protocol was not too high.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.648-650
• /
• 2008

We used micro-contact printing for source and drain electrodes of OTFTs. The proper solvent of Ag paste and baking temperature were extracted for PVP gate dielectric and pentacene semiconductor. The mobility was 0.025 cm2/V.sec and on/off ratio was $2{\times}10^5$.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.165-173
• /
• 2006

Network Mobility Basic Support protocol enables mobile network to change their point of attachment to the Internet, but causes some problems such as suboptimal muting and multiple encapsulations. The proposed scheme, combining Prefix Delegation protocol with HMIPv6 concept can provide more effective route optimization and reduce the amount of packet losses and the burden of location registration for handoff. It also uses hierarchical mobile network prefix (HMNP) assignment and provides tree-based routing mechanism to allocate the location address of mobile network nodes (MNNs) and support micro-mobility. In this scheme, Mobility Management Router (MMR) not only maintains the binding informations for all MNNs in nested mobile networks, but also supports binding procedures to reduce the volume of handoff signals oyer the mobile network. The performance is evaluated using NS-2.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.163-166
• /
• 2003

In recent years, there has been increased to access multimedia service through the Internet due to rise of the access speed. We suppose the co-existence of the various access networks in adjacent area in the future, such as wireless LAN, Bluetooth, and 3G Cellular So, the size of the cell will be smaller and the number of access point will be increased. In other words, the potable devices need the efficient mobility scheme due to move between cells frequently Currently, the several of the scheme, which is Cellular IP, HAWAII, Mobile IPv4 regional registration, and hierarchical Mobile IPv6, is suggested to support micro-mobility but Mobile IPv4 is standard scheme to support the mobility of the mobile node. MPLS, which forwards the packet through switching instead of routing using IP address, has begun to deploy in the internet backbone to increase the performance of mobility protocol. The integration of both MPLS and Mobile IP improves the scalability of the Mobile IP data forwarding process by leveraging on the features MPLS which are fast switching and high scalability. Moreover it abbreviates IP-in-IP tunneling between HA and FA. In this paper, we suggest efficient mobility scheme through integration of both MPLS and hierarchical Mobile IPv6.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.54-62
• /
• 2011

This paper proposes both global and local mobility management (MM) scheme improved from Multi Protocol Label Switching (MPLS)-based Mobility Management scheme (MPLS-MOB) for seamless service in Next Generation Network (NGN). The proposed scheme adds local MM on the existing MPLS-MOB which supports global MM by processing handover signaling by 2.5 layer switching via Label Switch Path (LSP) of MPLS. We numerically analyze and verify that the proposed scheme has lower handover latency time than the existing ones, such as micro-MM methods using MPLS as well as MIP and an interworking scenario between PMIP and MIP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5028-5057
• /
• 2015

In this paper, a new mathematical scheme of Macro Handover Management (MHM) in F-HMIPv6 networks based on Location Based Services (LBS) is proposed. Previous schemes based on F-HMIPv6 protocol usually suffer from three major drawbacks: First, They don't exploit the information about the user mobility behavior in order to reduce handover effects. Second, they only focus on the micro mobility level. Third, they don't consider the quality of service (QoS) of the traffic. The proposed MHM scheme avoids these drawbacks using the available information about Mobile Node (MN) such as user mobility patterns and MN's velocity to predict handover and improve network's QoS. It also takes the traffic type in consideration since it presents a major factor in locating QoS for the user. MHM is analyzed and compared with the F-HMIPv6. The results show that MHM improves the performance in terms of packet delivery cost, location update cost, and handover latency. The design of MHM comprises software package in the MN in addition to a hardware part in the network side. It has implications for communication, design, and pricing of mobile services.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.53-66
• /
• 1992

Extensive research has been perform성 on the property-microstructure-process condition relations of thin films. The various proposed models are mainly based on physical vapor deposition processes. Especially the study on the surface condition of substrates in Zone 1 with low surface mobility has not been sufficient. In this study, therefore, we discussed the mochological changes of TiN films deposited by plusma enhanced chemical vapor deposition process with substrates of different composition and micro-rorghness, and compared it with the Structure Zone Model. We could find out that the growth rate of films increased and micro-grain size decreased with the increase in micro-roughness, but it does not improve the mechanical properties because of many imperfections like voids, micro-cracks, stacking faults, etc. This means that, in these deposition conditions, the increase in shadowing diffect is more effective than the increase in nucleation sites on the growth of films due to the increase in substrate roughness.

• Journal of the Korea Society for Simulation
• /
• v.14 no.4
• /
• pp.77-86
• /
• 2005

[ $IP^2$ ] (IP-based IMT Network Platform) is a ubiquitous platform supporting mobility using two step If address IPha (IP host address) and IPra (IP routing address) - in a backbone network. MN (Mobile Node) in $IP^2$ maintains either Active or Dormant state, which is transferred to Active state through Paging process when communication is required. In this paper, we proposed a Paging method using proxy to resolve the problem of the conventional Paging method which transmits the Paging messages to all cells in LA (Location Area) resulting in the excessive use of network resources. Performanceevaluation of the proposed method using NS-2 showed that the usage of network resources becomes more efficient by reducing paging loads, especially under the condition of increased nodes.