• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.148-155
• /
• 2014

This practical study investigates the effects of job satisfaction as a result of the stresses felt by many dispatchers who work in the subway industry in the Seoul metropolitan area. Factors that cause stress are assessed. The organization system, inappropriate compensation, workplace culture, and job requirements, among several types of organizational stresses are significantly related to job satisfaction. The results of the analysis indicate that there is a close link between job satisfaction and dispatcher communication factors. This paper suggests stress-relief measures for dispatchers who must handle a variety of civil complaints and improper communications with field departments based on the analysis of the answers to descriptive questionnaire items.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.12
• /
• pp.105-114
• /
• 2019

The goal of this study is to quantitatively evaluate the effects of the additional construction of urban railroads. To this end, 1) establish accessibility as a measure of quantitative evaluation of construction effects; 2) select the 'Integration' of Space Syntax as a quantifiable indicator of accessibility; 3) represent the Seoul railroads as a network; 4) calculate the 'Integration' form the network before and after the additional construction of the urban railroads. By calculating the change of the 'Integration' of the individual nodes and the change of the sum of the 'Integration' of given zones, the change in accessibility of a particular node and the change in accessibility of a particular region were calculated. After analyzing the change in accessibility in nodes and areas as well, it was confirmed that the additional construction of urban railroads was improving accessibility as a whole of Seoul. It was also identified that there was a degree of difference in the extent of the accessibility change for the different areas. It is particularly noteworthy that changes occur in the accessibility ranking. While certain regions were improving relative rankings, others fell in rank. With this finding, it could be argued that active consideration of the areas in which the relative decline occurs is needed when the planned urban railroad is being built.

• Journal of Korean Society on Water Environment
• /
• v.38 no.5
• /
• pp.231-239
• /
• 2022

In this study, we applied ENERWATER to evaluate the energy consumption labeling of wastewater treatment plants in Korea using the Korea sewerage statistics data. The results showed that the energy label status was excellent in the SBR process for small and medium-scale wastewater treatment plants and the A2O process for large-scale wastewater treatment plants. The energy labeling of wastewater treatment plants of 50,000 tons capacity was excellent. The statuses of metropolitan cities and Jeollanam-do province were excellent. We analyzed the effects of renewable energy on wastewater treatment plants' energy consumption and found out that digestion gas for large-scale plants and photovoltaic energy for small-scale plants were effective in improving energy labeling. In addition, we compared the energy labels of four wastewater treatment plants in "Z" city and wastewater treatment plant "X" had the best energy label, and the wastewater treatment plants "V" and "Y" had to be selected as priorities for the energy diagnosis and improvement project. In a comprehensive conclusion, the applicability of ENERWATER was confirmed based on sewage statistics data and labeling can be used to set priorities for the energy diagnosis and improvement project.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.164-172
• /
• 2015

Seoul subway plays an important part for the public transportation service in Seoul metropolitan area. As the subway system is typically a closed environment, frequent air pollution problems occurred and passengers get malhealth impact. Especially particulate matters (PM) is well known as one of the major pollutants in subway environments. The purpose of this study was to compare the concentrations of $PM_{10}$ and $PM_{2.5}$ in the Seoul subway system and to provide fundamental data in order to management of subway system. $PM_{10}$ and $PM_{2.5}$ samples were collected in the M station platform and tunnel of Subway Line 4 in Seoul metropolitan and in an outdoor location close to it from Apr. 21, 2010~Oct. 27, 2013. The samples collected on teflon filters using $PM_{10}$ and $PM_{2.5}$ mini-volume portable samplers and PM sequential sampler. The PM contributions were $48.6{\mu}g/m^3$ (outdoor), $84.6{\mu}g/m^3$ (platform) and $204.8{\mu}g/m^3$ (tunnel) for $PM_{10}$, and $34.6{\mu}g/m^3$ (outdoor), $49.7{\mu}g/m^3$ (platform) and $83.1{\mu}g/m^3$ (tunnel) for $PM_{2.5}$. The $PM_{10}$ levels inside stations and outdoors are poorly correlated, indicating that $PM_{10}$ levels in the metro system are mainly influenced by internal sources. In this study, we compared PM concentrations before and after operation of ventilation and Electrostatic Precipitator (EP). Despite the increased PM concentration at outdoor, $PM_{10}$ concentration at platform and tunnel showed the 31.2% and 32.3% reduction efficiency after operation the reduction system. The overall results of this study suggest that the installation and operation of the ventilating system and EP should have served as one of the important components for maintaining the air quality in the subway system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.40-53
• /
• 2018

In smart card data, movement of railway passengers appears in order of smart card terminal ID. The initial terminal ID holds information on the entering station's tag-in railway line, the final terminal ID the exit station tag-out railway line, and the middle terminal ID the transfer station tag subway line. During the past, when the metropolitan city rail consisted of three public corporations (Seoul Metro, Incheon Transit Corporation, and Korail), OD data was expressed in two metrics of initial and final smart card terminal ID. Recently, with the entrance of private corporations like Shinbundang Railroad Corporation, and UI Corporation, inclusion of entering transfer line terminal ID and exiting transfer line terminal ID as part of Chain OD has become standard. Exact route construction using Chain OD has thus become integral as basic data for revenue allocation amongst metropolitan railway transport corporations. Accordingly, path detection in railway networks has evolved to an optimal path detection problem using Chain OD, hence calling for a renewed solution method. This research proposes an optimal path detection method between the initial terminal ID and final terminal ID of Chain OD terminal IDs within the railway network. Here, private line transfer TagIn/Out must be reflected in optimal path detection using Chain OD. To achieve this, three types of link-based optimum path detection methods are applied in order of 1. node-link, 2. link-link, 3. link-node. The method proposed based on additional path costs is shown to satisfy the optimal conditions.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.226-240
• /
• 2022

Local governments over a certain size in Republic of Korea may conduct Environmental Impact Assessment (EIA) considering regional characteristics if it is necessary, in accordance with Article 42 of the 「Environmental Impact Assessment Act」. However, it was investigated that the number of local government EIA operation in many local governments was less than initial expectations. In order to improve it, the status of ordinances and consultation guidelines which are different for each local government need to be compared, and the institutional issues forthe relevant local governments must be found considering regional characteristics. Furthermore, detailed regulation and guidance on the local government EIA procedure should be included in the consultation guidelines and related information need to be provided. In this study, focusing on the case of Incheon Metropolitan City, the status of local government EIA ordinances in metropolitan cities and provinces with a similar condition was investigated, and the types and scope of target projects were compared and analyzed. In addition, consultation guidelines forIncheon Metropolitan City were written, and improvements on the procedure flow and overall schedule designation derived from the process were presented. In the case of Incheon Metropolitan City, there were no detailed information officially announced regarding the regulations of the local government EIA ordinance and follow-up management, so the administrative system of the local government needed to be reinforced in this field. Meanwhile, considering the status of local environment and geography, some target project types were deemed necessary to be added: port construction projects, water resource development projects, railroad construction projects, and military facilities installation projects. The results of this study will provide useful information to local governments which want to improve their operation effectiveness by reorganizing the local government EIA system and preparing specific guidelines.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.453-460
• /
• 2011

The inland logistics center is a large scale of logistics facility that enables roads, rails, ports, and airports to carry out chained-transports and combined-transports, and the logistics center are established at the main logistics posts in order to reduce the cost of transport by mass transportation. However, it is expected that the capacity of Euiwang ICD, the only inland logistics centers in the capital area, will reach its limit before 2015, so it is required to establish another stations or to improve the existing facility. Especially, in case of Euiwang ICD, the expansion of the center is not possible because of its position, so it is required to establish new logistics centers in other places in order to raise the capacity of transport. Therefore, this study suggests to establish new metropolitan logistics centers on the western coast line in order to solve the problem of shortage of tract capacity that is brought on by the newly established inland logistics centers on the axis of the western coastline (Song-san Station and An-jung Station), and analyzes how the new logistics center will distribute railroad cargoes. By these, this study contributes to reduce the cost of transport by providing smooth railroad transport service.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.802-809
• /
• 2017

3D printing technology is a manufacturing process for products, in which polymer and metal materials are laminated to form structures. It is advantageous for manufacturing parts requiring a high degree of design freedom and functionality. In addition, it would be a suitable technology for the production of parts for railway vehicles in the future, due to the need to produce parts in small quantities. In order to fully exploit the advantages of 3D printing technology, it is necessary to consider the process characteristics during the design of the product. In this study, the redesign and manufacturing technology of the product considering the performance and process conditions were studied for the heat exchanger in the air compressor of railway vehicles, as a trial application of the 3D printing technique. First of all, the design concept to improve the performance of the heat exchanger was defined, and the design range was specified to satisfy the performance of the present heat exchanger analyzed experimentally. Then, the detailed design was revised considering the characteristics of the metal 3D printing process, such as the manufacturing restrictions and production time. Based on the final design, the product was fabricated by the 3D printing process using aluminum material, and it was confirmed that the dimensional accuracy was satisfied. The weight of the final product was reduced by 41% compared with the existing products. The results of this study will make it possible to develop an efficient product design process for 3D printing technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.511-517
• /
• 2016

Current oil-type potential transformers for trains are filled with insulating oil, which could have problems like explosions due to rising inner pressure during train operation. Therefore, mold and dry-type potential transformers are being developed to prevent explosions. One problem in manufacturing mold-type transformers is preventing void formation around the coiled core inside the mold during epoxy filling, which could cause an electrical spark. Micro voids can remain in the resin after filling, and macro voids can occur due to the structure shape. A transformer that is being developed has a cavity at the junction of the core and the coil for better performance, and when highly viscous epoxy flows inside the cavity channel, macro voids can form inside it. Therefore, in this study, the free-surface flow of the mold filling procedure was analyzed numerically by applying the VOF method. The results were used to understand the phenomena of void formation inside the cavity and to modify the process conditions to reduce voids.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.719-727
• /
• 2013

Four-step travel-demand modeling based on a trip-level has been widely used over many decades. However, there has been a wide variance between forecasted- and real-travel demands, which leads less reliable on the model implications. A primary reason is that person's real travel behavior is not properly captured throughout the model developments. An activity-based modeling (ABM) approach was proposed and developed toward increasing the accuracy and reality of person's travel behavior in the U.S. since 1990', and stands as a good alternative to replace the existing trip-based approach. The paper contributes to the understanding of how the ABM approaches are dissimilar to the trip-based modeling approach in terms of estimation units, estimation process, their pros and cons and etc. We examined three activity-based travel demand model systems (DaySim, CT-Ramp, and CEMDAP) that are most commonly applied by many MPOs (Metropolitan Planning Organization). We found that the ABM approach can effectively explain multi-dimensional travel decision-makings and be expected to increase the predictive accuracy. Overall, the ABM approach can be a good substitute for the existing travel-demand methods having unreliable forecasts.