• 약학회지
• /
• 제27권2호
• /
• pp.125-131
• /
• 1983

Whether ($AB_{w}$) may be neglected against ($A_{w}^{+}$) in the calculation of the extraction coefficient of ion-pairs was criticized by both experiments and theoretical consideration, where ($AB_{w}$) and ($A_{w}^{+}$) mean the molar concentration of ion-pair AB and cation $A^{+}$ in the aqueous phase. Ion-pair complexes were partitioned between phosphate buffer (pH 7.4) and n-octanol. Tetrabutylammonium, isopropamide and methylene blue were selected as cations and benzoic acid, p-toluenesulfonic acid, salicylic acid and taurodeoxycholic acid were selected as counter ions (anions). As a result, conventional methods which assume no existence of ($AB_{w}$) were proven to lack generality. The equation proposed in my earlier report was confirmed to be valid as a general method.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2309-2314
• /
• 2012

Ag deposited N-$TiO_2$ composite nanoparticles were prepared via $NH_3$ plasma treatment. X-ray diffraction, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared $TiO_2$ samples. The plasma treatment did not change the phase composition and particle sizes of $TiO_2$ samples, but extended its absorption edges to the visible light region. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activities of Ag deposited N-$TiO_2$ composite nanoparticles were much higher than Ag-$TiO_2$, N-$TiO_2$, and P25. A possible mechanism for the photocatalysis was proposed.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1269-1274
• /
• 2012

A visible light responsive N, Mo co-doped $TiO_2$ were prepared by sol-gel method. X-ray diffraction, TEM, $N_2$ adsorption, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared $TiO_2$ samples. Doping restrained the phase transformation from anatase to rutile and reduced the particle sizes. The band gap was much narrowed after N, Mo co-doping. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activities of doped $TiO_2$ were much higher than that of neat $TiO_2$. The photocatalytic stability of N, Mo co-doped $TiO_2$ was much better than that of N doped $TiO_2$.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.256-261
• /
• 2009

Sol-gel법에 의해 친수성 투명 $TiO_2$ 박막이 제조되었고, 박막의 접촉각, 표면구조, 투과율의 특성이 측정되었다. 더욱이 박막의 친수 특성을 향상시키기 위하여 계면활성제 tween 80이 이용되었다. Tween 80의 첨가량이 0, 10, 30, 50wt%일 때, 제조된 박막의 접촉각은 각각 $41.4^{\circ}$, $18.2^{\circ}$, $16.0^{\circ}$, $13.2^{\circ}$로 확인되었다. 제조된 $TiO_2$ 박막은 자외선 조사 후 Methylene blue용액을 분해시켜 흡광도를 감소시키는 광촉매 특성을 보여주었다. 일반유리(bare glass), Antimony Tin Oxide(ATO)코팅 유리, Fluorine Tin Oxide(FTO)코팅유리, Indium Tin Oxide(ITO)코팅유리 기판 위 에 Tween 80을 30 wt% 함유한 $TiO_2$ 용액을 적층하여 박막의 접촉각과 투과율을 측정하였다. 다양한 기판에 제조된 박막은 $16.2\sim27.1^{\circ}$의 표면 접촉각을 나타냈으며 자외선 조사 후에는 접촉각이 $13.2\sim17.6^{\circ}$로 낮아졌다. 특히 ATO코팅유리와 FTO 코팅유리 기판 위에 코팅된 필름은 가시광선 영역에서 각각 74.6%, 76.8%의 높은 투과율을 나타내었고, 적외선 영역에서는 각각 54.2%, 40.4%의 낮은 투과율을 나타냈다.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1037-1044
• /
• 2000

본 연구에서는 국내에서 쉽게 구할 수 있으며 탄화시 높은 강도를 가질 수 있는 참나무를 이용하여 생물 활성탄 공정(BAC)에 적합한 활성탄, 즉 흡착뿐만 아니라 미생물의 안식처로서의 역할을 할 수 있는 거대 세공이 많이 발달된 활성탄을 제조하는데 그 주안점을 두었다. 활성탄의 제조는 인산 침적에 의한 화학적 활성화법을 이용하여 제조하였고 제조된 활성탄의 요오드 흡착력(mg/g), 메틸렌 블루 탈색력(mg/g), B.E.T Method에 의한 비표면적($m^2/g$), 세공 크기 분포(Pore size distribution)를 분석하여 현재 생물 활성탄 공정에 많이 사용되고 있는 P사의 'picabiol' 활성탄과 비교하였다. 본 연구에서 사용된 화학적 활성화법의 주인자는 인산의 침적농도, 활성화 용도, 그리고 활성화 시간이다. 이중 활성화 시간은 예비 실험으로 3시간으로 고정시켰다. 최적 활성화 온도와 인산 첨적 농도를 찾기 위하여 활성화 온도는 $600^{\circ}C$에서 $800^{\circ}C$ 로 변화시켰으며 인산 침적 농도는 35wt%에서 50wt%로 변화시켰다. 이렇게 제조된 활성탄 중 $800^{\circ}C$에서 활성화시켰을 때 모든 인산 침적 농도에서 요오드 흡착력(1000~1100 mg/g)과 메틸렌 블루 탈색력(200~400 mg/g)으로서 가장 높은 효율의 활성탄을 얻을 수 있었으며 picabiol과 비교하여 보았을 때 비슷하거나 더 높은 효율의 활성탄을 제조할 수 있었다.

• 한국육종학회지
• /
• 제40권1호
• /
• pp.26-30
• /
• 2008

전기영동법과 발색반응법 등의 장 단점 분석을 통해 가장 저렴한 비용으로 신속, 정확하게 lipoxygenase isozymes를 검정하는 분석체계를 확립하여 무비린내 나물콩 품종육성에 활용 가능할 것으로 보인다. 1. SDS-PAGE 전기영동법은 Lx-0, L-1, L-2, 및 L-123의 검정에는 효과적이었으나, L-3, L-13, 및 L-23의 검정에서는 분리능에 있어서 정확도가 떨어져 검정효율은 92.2%를 나타내었다. 2. 발색반응법을 이용한 lipoxygenase isozymes의 검정방법은 간편하고 신속하였으며 검정효율은 95.7%였다. 3. L-1과L-2가 존재하는 종실의 기질용액에서는 1분 이내에 methylene blue의 청색 반응용액을 탈색시켰으며 그 결과가 오랫동안 지속되었다. 4. L-3가 존재하는 종실의 용액에서는 20초 이내에 ${\beta}$-carotene의 황색 반응용액을 탈색시켰으나 그 결과가 오래 지속되지 않아 신속한 결과분석이 요구되었다. 5. L-1, L-2 및 L-3을 동시에 검정하기 위한 전체 시료량은 콩 종자 1알의 약 10 mg 정도이면 충분하였으며, 검정하지 않은 나머지 부분은 파종에 이용될 수 있으므로 F2 종자에서 lipoxygenase isozymes 결핍계통을 조기에 선발 가능하였다. 6. 발색반응법과 SDS-PAGE 전기영동법을 적절히 겸용하여 수행하게 되면 시료 분석에 소요되는 시간은 1인 100점에 6.5시간 재료비는 약 54,000원이 소요되어 이 시스템이 가장 효율적인 lipoxygenase 검정방법으로 판명되었다.

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.144-154
• /
• 2005

The use of ozone gained acceptance in the production of ultrapure water because of its powerful oxidizing ability. Ozone is currently used to deactivate microorganisms and remove organic contaminants. However, interest also exists in using radical species, which arc stronger oxidants than ozone, in such processes. One means of producing radical species is by corona discharge. This work investigates the use of a novel pulseless corona-discharge system for the removal of organic substances in ultrapure water production. The method combines corona discharge with electrohydrodynamic spraying of oxygen, forming microbubbles. Experimental results show that pulseless corona discharge effectively removes organics, such as phenol and methylene blue, in deionized water. The corona-discharge method is demonstrated to be comparable to the direct use of ozone at a high-applied voltage. The results also show that a minimum applied voltage exists for operation of the corona-discharge method. In this work, the minimum applied voltage is approximately 4.5 kV. The kinetic rate or phenol degradation in the reactor is modeled. Modeling results show that the dominant species of the pulseless corona-discharge reactor are hydroxyl radical and aqueous electron. Several radical species produced in the pulseless corona-discharge process are identified experimentally. The. major species are hydroxyl radical, atomic hydrogen species, and ozone.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• 대한화장품학회지
• /
• 제39권4호
• /
• pp.271-279
• /
• 2013

립스틱의 보습력을 개선하기 위해 수용성 콜라겐(30 wt%)을 역미셀 방법으로 립스틱의 유상 내에 포접하였다. 콜라겐을 포함하는 역미셀은 외부상으로서 caprylic/capric triglyceride와 계면활성제인 polyoxyethylene(10) octylphenyl ether (Triton X-100)와 보조계면활성제로 aliphatic alcohol인 1-dodecanol을 이용하여 제조되었다. 콜라겐을 포접하는 역미셀의 형성 조건은 전기전도도와 methylene blue (MB)를 이용한 UV-vis spectrum을 통해 확인하였고, 콜라겐 포접체를 함유하는 역미셀의 립스틱에서 안정성 및 보습력은 레올로지 측정, 수분량 측정 및 아미노산 정량을 통해 확인하였다. 물과 계면활성제의 농도비인 W (water-pool), [$H_2O$]/[Triton X-100]는 10이하에서 안정한 역미셀이 형성되었다. 20 wt%의 콜라겐 포접 역미셀을 함유한 립스틱은 역미셀을 함유하지 않은 립스틱과 경도에서 큰 차이없이 안정하였으며, 수분량은 59%까지 개선되었고, 아미노산 함량은 92.7%였다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.136-141
• /
• 2010

ACF/ZnO photocatalyst was synthesized by a sol-gel method using activated carbon fiber (ACF) and Zn $(NO_3)_2$ as precursors. Samples were characterized by Brunauer-Emmett-Teller measurements (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The XRD results showed that ACF/ZnO composites only included a hexagonal phase by heat-treated temperature at $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, and $700^{\circ}C$. The SEM analysis revealed that the ACF/ZnO composites did not exhibit any morphological changes of the catalyst surface according to the different heat-treated temperatures. The photocatalytic activity of the samples was tested for degradation of methylene blue (MB) solutions under ultraviolet (UV) light and ultrasonication respectively. The results showed that the photocatalytic activity of ACF/ZnO composites heat-treated at $500^{\circ}C$ was higher than other samples, which is ascribed to the fine distribution of ZnO particles on the surface of the ACF. In addition, an ultrasound of low power (50 W) was used as an irradiation source to successfully induce ACF/ZnO composites to perform sonocatalytic degradation of MB. Results indicated that the sonocatalytic method in the presence of ACF/ZnO composites is an advisable choice for the treatments of organic dyes.