• 제목/요약/키워드: methylene blue method

검색결과 200건 처리시간 0.026초

질소 도핑 TiO2의 Methylene Blue 광분해 제거에의 적용 (Application of Photocatalytic Decomposition of Methylene Blue on N-doped TiO2)

  • 백미화;최수아;김동수
    • 한국물환경학회지
    • /
    • 제26권4호
    • /
    • pp.707-712
    • /
    • 2010
  • Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

Methylene Blue-stained Interstitial Cells are Electrically Active in the Myenteric Board Freshly Prepared from the Murine Small Intestine

  • Lee, Kyu-Pil;Jeon, Ju-Hong;So, In-Suk;Kim, Ki-Whan
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제10권4호
    • /
    • pp.193-198
    • /
    • 2006
  • Many gastrointestinal muscles show electrical oscillation, so-called 'slow wave', originated from interstitial cells of Cajal (ICCs). Thus, a technique to freshly isolate the cells is indispensable to explore the electrophysiological properties of the ICCs. To apply an enzyme solution on the serosal surface for cell isolation, the intestine was inverted and 0.02% trypsin solution and 0.04% collagenase solution were applied to serosal cavity. After the enzyme treatment, mucosal layer was removed and longitudinal muscle layer was gently separated from the rest of tissue. The thin layer was stretched in the recording chamber and mounted on an inverted microscope. Using ${\beta}-escine$, perforated whole cell patch clamp technique was used. Under a microscope, the tissue showed smooth muscle cells and interstitial cells around the myenteric plexus. Under voltage clamp condition, three types of membrane potential were recorded. One group of interstitial cells, which were positive to methylene blue and CD34, showed spontaneous outward current. These cells had bipolar shape and were considered as fibroblast-like cells because of their peculiar shape and arrangement. Another group, positive to c-kit and methylene blue, showed spontaneous inward current. These cells had more rounded shape and processes and were considered as ICCs. The third, positive to c-kit and had granules containing methylene blue, showed quiet membrane potentials under the voltage-clamp mode. These cells appeared to be resident macrophages. Therefore, in the freshly isolated thin tissue preparation, methylene blue could easily identify three types of cells rather than morphological properties. Using this method, we were able to study electrical properties of fibroblast and residential macrophage as well as myenteric ICCs.

TiO$_2$가 담지된 활성탄을 이용한 Methylene Blue의 광분해 (Photocatalytic Degradation of Methylene Blue using $TiO_2$ Supported on Activated Carbon)

  • 이종대;이태준;조경태
    • 한국응용과학기술학회지
    • /
    • 제23권2호
    • /
    • pp.153-159
    • /
    • 2006
  • The photocatalytic degradation of methylene blue(MB) was investigated using $TiO_2$ as photocatalyst and UV radiation. $TiO_2$ supported with activated carbon(AC) was prepared by SOL-GEL method and depended on several parameters such as the mass ratio of $TiO_2/AC$, pH and experimental time. The presence of the anatase and rutile crystal phase was determined by XRD analyses of the prepared $TiO_2$. The degradation of MB with $TiO_2/AC$ was about 20% higher than that of AC alone. A variation of photodegradation was negligible under UV radiation conditions ( ${\geq}$ 40W). It was experimentally showed that the photodegradation rate was increased with increasing the amount of photocatalyst. The optimal catalyst was prepared by impregmation of $5wt%-TiO_2$ with AC and was calcined at $300^{\circ}C$, and showed about 99% removal efficiency for 3hrs.

Sm이온이 도핑된 Ti-SBA-15 촉매에서의 메틸렌블루의 광촉매 분해 반응 (Photocatalytic Decomposition of Methylene Blue over Sm Ion Doped Ti-SBA-15 Catalysts)

  • 정원영;이성훈;홍성수
    • 한국환경과학회지
    • /
    • 제20권4호
    • /
    • pp.511-517
    • /
    • 2011
  • Ti-SBA-15 catalysts doped with samarium ion were synthesized using conventional hydrothermal method. The physical properties of Sm/Ti-SBA-15 catalysts have been characterized by XRD, FT-IR, DRS and PL. In addition, we have also examined the activity of these materials on the photocatalytic decomposition of methylene blue. The Sm/ Ti-SBA-15 was shown to have the mesoporous structure regardless of Sm ion doping. With doping amount of 1% lanthanide ion, the pore size and pore volume of Sm(Er, Cs)/Ti-SBA-15 decreased and the surface area increased. For the purpose of vibration characteristics on the Ti-SBA-15 and Sm/Ti-SBA-15 photocatalysts, the IR absorption at 960 $cm^{-1}$ commonly accepted the characteristic vibration of Ti-O-Si bond. 1% of Sm/Ti-SBA-15 had the highest photocatalytic activity on the decomposition of methylene blue but the catalysts doped with Er ions had lower activity in comparison with pure Ti-SBA-15 catalyst.

Photocatalytic Degradation of Methylene Blue in Presence of Graphene Oxide/TiO2 Nanocomposites

  • Kim, Sung Phil;Choi, Hyun Chul
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권9호
    • /
    • pp.2660-2664
    • /
    • 2014
  • A simple method of depositing titanium dioxide ($TiO_2$) nanoparticles onto graphene oxide (GO) as a catalytic support was devised for photocatalytic degradation of methylene blue (MB). Thiol groups were utilized as linkers to secure the $TiO_2$ nanoparticles. The resultant GO-supported $TiO_2$ (GO-$TiO_2$) sample was characterized by transmission electron microscopy (TEM), near-edge X-ray absorption fine structure (NEXAFS), and X-ray photoelectron spectroscopy (XPS) measurements, revealing that the anatase $TiO_2$ nanoparticles had effectively anchored to the GO surface. In the photodegradation of MB, GO-$TiO_2$ exhibited remarkably enhanced photocatalytic efficiency compared with thiolated GO and pure $TiO_2$ nanoparticles. Moreover, after five-cycle photodegradation experiment, no obvious deactivation was observed. The overall results showed that thiolated GO provides a good support substrate and, thereby, enhances the photodegradation effectiveness of the composite photocatalyst.

ZnO on Thiolated Graphene Oxide as Efficient Photocatalyst for Degradation of Methylene Blue

  • Kim, Yu Hyun;Choi, Hyun Chul
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권12호
    • /
    • pp.3586-3590
    • /
    • 2013
  • We present here an efficient and simple method for preparation of highly active heterogeneous ZnO photocatalyst (graphene oxide-zinc oxide: GO-ZnO), specifically by deposition of ZnO nanoparticles onto thiolated GOs. The resultant GO-ZnO sample was characterized by TEM, XRD, Auger, XPS, and Raman measurements, revealing that the size-similar and quasi-spherical ZnO nanoparticles were anchored to the thiolated GO surfaces. The average particle diameter was about 2.5 nm. In the photodegradation of methylene blue (MB) under ultraviolet (UV) light, GO-ZnO exhibited remarkably enhanced photocatalytic efficiency compared with thiolated GO and pure ZnO particles. This strong photocatalytic performance of GO-ZnO can be attributed to the suppression of electron recombination and the enhancement of mass transportation. The results showed that thiolated GO is the preferable supporting material.

기상 활성화법에 의한 대나무 활성탄 제조 (Production of Activated Carbon from Bamboo by Gas Activation Method)

  • 조광주;박영철
    • 에너지공학
    • /
    • 제13권2호
    • /
    • pp.166-172
    • /
    • 2004
  • The activated carbon was produced from Sancheong bamboo by steam and carbon dioxide gas activation methods. The carbonization of raw material was conducted at 90$0^{\circ}C$ and gas activation reactions were conducted with respect to various conditions. -activation temperature 750-90$0^{\circ}C$, the flow rate of steam 0.5-2g-$H_2O$/g-char$.$hr, the flow rate of carbon dioxide 5-30$m\ell$-$CO_2$/g-char-min and activation time 1-5 hr. The prepared activated carbons were measured yield, the adsorption capacity of iodine and methylene blue, BET specific surface area and pore size distribution. The adsorption capacity of iodine (680.5-1526.1 mg/g) and methylene blue (18.3-221.5 mg/g) increased with creasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the activation gas quantity in the range of 0.5-1.5g-$H_2O$/g-charㆍhr, 5-18.9$m\ell$-Co$_2$/g-charㆍmin. But those decreased over those range due to the pore shrinkage. The steam activation method was superior in efficiency to carbon dioxide activation method.

색소첨가 NIR을 이용한 우유 체세포수 측정법 개발 (Development of Rapid Somatic Cell Counting Method by Using Dye Adding NIR Spectroscopy)

  • 김기성;노해원;임상동;최창현;김용주
    • 한국축산식품학회지
    • /
    • 제28권1호
    • /
    • pp.63-68
    • /
    • 2008
  • 본 연구에서는 근적외선 분광광도계를 이용하여 원유의 체세포수 측정에 필요한 최적의 색소를 선정하기 위하여 eosin-Y, methyl red, methylen blue, resazurin 및 amido black 10B등의 5가지 색소를 0.01%첨가 후 근적외선 분광광도계를 이용하여 400-2,500 nm 영역에서 측청하였으며, PLS(partial least squar)분석 결과는 다음과 같다. 교정부 모델에서의 상관도는 raw milk 0.78, eosin-Y 0.65, methyl red 0.63, methylen blue 0.65, resazurin 0.98 그리고 amido black 10B는 0.99 였다. 또한, 검증부 모델에서의 상관도는 raw milk 0.49, eosin-Y 0.21, methyl red 0.36, methylen blue 0.47, resazurin 0.95 그리고 amido black 10B는 0.98 였다. 위 결과를 종합해 보면, amido black 10B를 첨가한 경우 검증부 모델의 상관도는 0.98, 검증부 오차(SEP)는 0.09로 가장 우수한 결과를 보였다.

Synthesis and Characterization of Fe-fullerene/TiO2 Photocatalysts Designed for Degradation of Methylene Blue

  • Meng, Za-Da;Zhang, Kan;Oh, Won-Chun
    • 대한금속재료학회지
    • /
    • 제48권7호
    • /
    • pp.674-682
    • /
    • 2010
  • Fe-fullerene/$TiO_2$ composite photocatalysts were prepared with titanium (IV) n-butoxide (TNB) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), Transmission electron microscope (TEM), specific surface area (BET), X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic degradation of methylene blue (MB) solution. XRD patterns of the composites showed that the Fe-fullerene/$TiO_2$ composite contained a typical single and clear anatase phase. The surface properties shown by SEM present a characterization of the texture on Fe-fullerene/$TiO_2$ composites and showed a homogenous composition in the particles for the titanium sources used. The EDX spectra for the elemental identification showed the presence of C and Ti with strong Fe peaks for the Fe-fullerene/$TiO_2$ composite. From the photocatalytic results, the excellent activity of the Fe-fullerene/$TiO_2$ composites for degradation of methylene blue under UV light irradiation could be attributed to both the effects between photocatalytic reaction of the supported $TiO_2$, decomposition of the organometallic reaction by the Fe compound and energy transfer effects such as electron and light of the fullerene.

염기성색소(鹽基性色素) Methylen Blue에 의(依)한 Oleic Acid의 흡광광도정량(吸光光度定量) (A Study on Spectrophotometric Determination of Oleic Acid by Basic Dye Methylen Bblue)

  • 이숙연
    • Journal of Pharmaceutical Investigation
    • /
    • 제4권1_2호
    • /
    • pp.46-54
    • /
    • 1974
  • A new spectrophotemetric method was estalished for the determination of oleic acid. This method is based on the 1,2-dichloroe-thane extraction of the ion-pair formed between methylene blue and oleic acid. But the absorbance of an ion-pair in the 1,2-dichloroe-thane layer was variable with the temperature, the ion-pair was extracted back into a diluted hydrochloric acid solution. The maximum absorbance of the acid extract observed at $660m{\mu}$ and a lineal relationship was observed from the initial amount over the range of $50-800{\gamma}/ml$ of oleic acid in the aqueous phase. The composition ratio of the ion-pair formed between methylene blue and oleic acid was determined to be 2 : 1 by both the mole ratio and continuous variation methods.

  • PDF