• 한국응용과학기술학회지
• /
• 제38권2호
• /
• pp.476-487
• /
• 2021

고형분 70% 아크릴수지를 합성하기 위해 n-butyl methacrylate(BMA), methyl methacrylate(MMA), 2-hydroxyethyl methacrylate(2-HEMA) 및 acetoacetoxyethyl acrylate(AAEA)와 caprolactone acrylate(CLA)를 사용하여 공중합체의 유리전이온도(T_g)를 50 ℃로 조정하여 합성하였으며, 합성한 아크릴수지의 점도와 분자량은 수산기가(OH values)의 증가에 따라 증가되었다. 높은 고형분의 아크릴수지 합성에 적합한 반응개시제는 di-tert-amyl peroxide 이었으며, 최적의 합성조건은 반응 개시제 5 wt%, 연쇄이동제 4 wt%, 반응온도 140 ℃에서 적하시간은 4시간이었다. 합성수지의 구조는 FT-IR과 ¹H-NMR spectroscopy로 확인하였고, 수평균 분자량은 1900~2600, 분자량 분포도 1.4~2.1을 얻었다. 합성한 아크릴수지와 무황변성 폴리이소시아네이트인 hexamethylene diisocyanate trimer(Desmodur N-3300)의 NCO/OH 당량비를 1.2/1.0으로 조절하여 아크릴-우레탄 투명도료를 제조하였다. 도료의 물리적 특성으로 점도, 부착성, 건조시간, 가사시간, 연필경도 및 광택을 비교 검토한 결과 부착성, 건조시간, 가사시간, 연필경도 및 광택이 양호한 결과를 나타내었고, 특히 CLA를 10 % 도입한 도료는 부착성이 우수하고 낮은 점도와 높은 경도를 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.489-492
• /
• 2003

Photoalignment materials of PGMAcr, poly[3-(acryloyloxy)-2-hydroxypropyl methacrylate] using an acrylate unit photopolymerized by a photo-initiator and PGMA4Ch, poly[3- (4-ehalconyloxy)-2-hydroxypropyl methacrylate] using photodimerization by the chalcone group were synthesized. Also, the liquid crystal (LC) alignment capabilities on the photopolymer layers were studied. A good LC alignment with UV exposure on the PGMAcr surface can be obtained. However, LC alignment defects were observed on the PGMA4Ch surface. The LC alignment capability of the PGMAcr surface by the photoinitiator was better than that of the PGMA4Ch surface by the chalcone group which is a photosensitive moiety.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.533-542
• /
• 1995

The present study investigated the effectiveness of pretreatment on dentin bonding. The adhesive resin was 5% 4-methacryloyloxyethyl trimellitate anhydride (4-META) in methyl methacrylate (MMA) combined with poly-MMA powder. Polymerization of this resin was initiated by tri-n-butyl borage (TBB). Ground bovine dentin samples were etched with either an aqueous solution of 10% citric (10-0 solution) (Group I) or aqueous solution of 10% citric acid and 3% ferric chloride(10-3 solution) (Group ll ). After etching, the primer (an aqueous solution of 35% hydroxyethyl methacrylate (HEM- A) and 5% glutaraldehyde was applied on the differently etched surfaces (Group III , Group IV). The 10-0 treatment showed the lowest tensile bond strength, followed by the 10-3 treatment, primer application after the 10-0 treatment and primer application after the 10-3 treatment. The relationship among the surface morphology after pretreatment, fractured surface morphology and tensile bond strength was examined. It revealed that the surface morphology change by different pretreatment influenced the bond strength and the resulting fractured surface morphology. The correlation of tensile bond strength with the fracture morphology was explained.

• Bulletin of the Korean Chemical Society
• /
• 제18권4호
• /
• pp.444-447
• /
• 1997

• 폴리머
• /
• 제28권6호
• /
• pp.445-454
• /
• 2004

반도체의 최소 회로 선폭이 더욱 미세해지면서 포토레지스트 현상액으로 초임계 이산화 탄소를 응용하려는 연구가 진행되고 있다. 초임계 이산화 탄소는 환경친화적이며, 미세 화상 공정 단계에서 표면장력이 작아 패턴 붕괴를 막을 수 있고, 고분자에 대한 선택적 용해도가 큰 장점을 지니고 있다. 본 연구에서는 초임계 이산화 탄소 전용 포토레지스트의 기본 수지 합성을 위해 t-부틸 메타크릴레이트 (t-BMA)와 과불소화 데실 메타크릴레이트 (F17MA)를 단량체로 이용하여 다양한 몰비로 공중합하였고, 공중합체의 초임계 이산화 탄소에 대한 용해도를 분석하였다. 합성된 고분자와 광산 발생제를 섞어 제조한 포토레지스트는 노광을 통해 초임계 이산화 탄소에 대한 용해도가 감소되므로, 합성된 고분자의 초임계 이산화 탄소 전용 포토레지스트로서의 가능성을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.172-179
• /
• 2014

Objectives: This study aimed to assess the effect of 38% carbamide peroxide on the microleakage of class V cavities restored with either a silorane-based composite or two methacrylate-based composites. Materials and Methods: A total of 96 class V cavities were prepared on the buccal surface of extracted human teeth with both enamel and dentin margins and were randomly assigned into three groups of Filtek P90 (3M-ESPE) + P90 system adhesive (3M-ESPE)(group A), Filtek Z250 (3M-ESPE) + Adper Prompt L-Pop (3M-ESPE)(group B) and Filtek Z350XT (3M-ESPE) + Adper Prompt L-Pop (group C). Half of the teeth were randomly underwent bleaching (38% carbamide peroxide, Day White, Discus Dental, applying for 15 min, twice a day for 14 day) while the remaining half (control) were not bleached. Dye penetration was measured following immersion in basic fuchsine. Data were statistically analyzed using Kruskal-Wallis and Mann-Whitney U tests at a level of 0.05. Results: No significant differences were found between composites in the control groups in enamel (p = 0.171) or dentin (p = 0.094) margins. After bleaching, microleakage of Z250 (in enamel [p = 0.867] or dentin [p = 0.590] margins) and Z350 (in enamel [p = 0.445] or dentin [p = 0.591]margins) did not change significantly, but the microleakage of P90 significantly increased in both enamel (p = 0.042) and dentin (p = 0.002) margins. Conclusions: No significant differences were noted between the bleached and control subgroups of two methacrylate-based composites in enamel or dentin margins. Microleakage of silorane-based composite significantly increased after bleaching.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.46-54
• /
• 2013

본 연구에서는 저온유화중합을 통해 벤질메타아크릴레이트 (benzyl methacrylate, BzMA) 를 third monomer 로 사용하여 styrene-butadiene-benzyl methacrylate copolymer (BzMA-SBR) 를 합성하였다. 수산화나트륨 (NaOH) 을 이용하여 가수분해반응을 통해 BzMA 의 벤질 그룹을 deprotection 시켜 carboxylated styrene butadiene rubber (XSBR) 로 만든 후, Na-XSBR 아이오노머를 제조하였다. 중합 시 BzMA 의 투입량을 달리하여 XSBR의 카르복실기 (carboxyl group) 함량을 다양하게 조절하였다. FTIR (ATR), $^1H$ NMR, DSC 를 이용하여 합성된 BzMA-SBR, Na-XSBR 아이오노머의 구조와 특성을 분석하였다.

• 대한화학회지
• /
• 제61권6호
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.533-540
• /
• 2007

We designed and successfully synthesized UV curable, functional acrylate monomers having a polarizing group, i.e., an electron-withdrawing and/or electron-donating group for the optical materials of high refractive index. Optical polymer films made from the functional methacrylate monomers were achieved with photo crosslinking under UV illumination. A monomer having amino and cyano groups (Dimer-CN) exhibited the highest refractive index ($n_{TE}$=1.595 at 850nm) among the studied methacrylate derivatives, due to the large polarizability of the dipolar monomer structures with electron-donating and withdrawing groups. By controlling the compositions of the functional acrylate monomer of copolymers, the refractive indices of the polymers were readily adjusted within a wide range of 1.498-1.595. The copolymers showed a high glass transition temperature $(T_g)$ and good thermal stability, which are desirable for optical applications. $T_g$ and $T_{10%}$ (10%-weight loss occurred) of the copolymers ranged from $120-140^{\circ}C$ and from $329-387^{\circ}C$, respectively.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.200-206
• /
• 2014

PURPOSE. This in vitro study investigated the fracture resistance of endodontically treated premolars restored using silorane-or methacrylate-based composite along with or without fiber or nano-ionomer base. MATERIALS AND METHODS. Ninety-six intact maxillary premolars were randomly divided into eight groups (n = 12). G1 (negative control) was the intact teeth. In Groups 2-8, root canal treatment with mesio-occlusodistal preparation was performed. G2 (positive control) was kept unrestored. The other groups were restored using composite resin as follows: G3, methacrylate-based composite (Z250); G4, methacrylate composite (Z250) with polyethylene fiber; G5 and G6, silorane-based composite (Filtek P90) without and with the fiber, respectively; G7 and G8, methacrylate-and silorane-based composite with nano-ionomer base, respectively. After aging period and thermocycling for 1000 cycles, fracture strength was tested and fracture patterns were inspected. The results were analyzed using ANOVA and Tukey HSD tests (${\alpha}$=0.05). RESULTS. Mean fracture resistance for the eight groups (in Newton) were G1: $1200{\pm}169^a$, G2: $360{\pm}93^b$, G3: $632{\pm}196^c$, G4: $692{\pm}195^c$, G5: $917{\pm}159^d$, G6: $1013{\pm}125^{ad}$, G7: $959{\pm}148^d$, G8: $947{\pm}105^d$ (different superscript letters revealed significant difference among groups). Most of the fractures in all the groups were restorable, except Group 3. CONCLUSION. Silorane-based composite revealed significantly higher strength of the restored premolars compared to that of methacrylate one. Fiber insertion demonstrated no additional effect on the strength of both composite restorations; however, it increased the prevalence of restorable fracture of methacrylate-based composite restored teeth. Using nano-ionomer base under methacrylate-based composite had a positive effect on fracture resistance and pattern. Only fiber-reinforced silorane composite restoration resulted in a strength similar to that of the intact teeth.