• Journal of Welding and Joining
• /
• v.34 no.3
• /
• pp.69-76
• /
• 2016

Characteristics of dissimilar metal welds between ASTM Type 316L and carbon steel ASTM A516 Gr.70 made with FCAW were evaluated in terms of microstructure, ferrite content, EDS analysis, hardness, tensile strength, impact toughness and corrosion resistance. Three heat inputs of 10.4, 16.9, 23.4kJ/cm were employed to make joints of dissimilar metals with E309LMoT1-1 wire. Microstructure of dissimilar weld metals consisted of mostly vermicular type of ${\delta}$-ferrite and some lathy type of ${\delta}$-ferrite, and ${\delta}$-ferrite was transformed into globular type in reheated zone. In all conditions, weld metals were solidified on FA solidification mode. Based on the EDS analysis of weld metals, All Creq/Nieq values were in the range of FA solidification mode, and it was decreased with increasing heat inputs whereas it was increased with increasing layers. The amount of ${\delta}$-ferrite was decreased with increasing heat input due to the difference of cooling rate, and it was increased with increasing layers. Accordingly, hardness and tensile strength of dissimilar metals weld joints was decreased with increasing heat input while impact energy was increased with increasing heat input. Corrosion test of dissimilar metals weld joints showed that weight gain rate of heat input 10.4kJ/cm was the greatest, and that of three heat inputs became constant after certain time.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.209-213
• /
• 2012

Recently, the fuel using in the diesel engines of marine ships has been changed to a low quality of heavy oil because of the steady increase in the price of oil. Therefore, the wear and corrosion in all parts of the engine such as the cylinder liner, piston crown, and spindle and seat ring of exhaust valves has correspondingly increased. The repair welding of a piston crown is a unique method for prolonging its lifetime from an economic point of view. In this case, filler metals with a high corrosion and wear resistance are mainly being used for repair welding. However, often at a job site on a ship, a piston crown is actually welded with mild filler metals. Therefore, in this study, mild filler metals such as CSF350H, E8000B2, and 435 were welded to SS401 steel as the base metal, and the corrosion properties of the weld metals with and without post weld heat treatment were investigated using some electrochemical methods in a 0.1% $H_2SO_4$ solution. The weld metal welded with CSF350H filler metal exhibited the best corrosion resistance among these filler metals, irrespective of the heat treatment. However, the weld metal zones of the E8000B2 and 435 filler metals exhibited better and worse corrosion resistance with the heat treatment, respectively. As a result, it is suggested that in the case of repair welding with CSF350H and 435 filler metals, no heat treatment is advisable, while heat treatment is desirable if E8000B2filler metal is used with repair welding.

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.175-188
• /
• 2015

For 63 soil series distributed in Jeju Island, natural uncultivated soils in each soil series were collected, and their physicochemical properties and their concentrations of 19 heavy metals including 8 heavy metals which are regulated by Korean Soil Environment Conservation Law, were analyzed. Moreover, the correlations between physicochemical properties and heavy metal concentrations, and between heavy metal concentrations were analyzed. The heavy metals distributed in the higher concentrations and the lower concentrations with arithmetric mean value, were Mn(730 mg/kg) and Ba(493 mg/kg), and Hg(0.146 mg/kg) and Tl(0.096 mg/kg), respectively. The correlations between pH($H_2O$) and heavy metals(Hg, Ni, Co, Se), between pH(NaF) and heavy metals(Hg, Ba, Se, Tl), and between organic matter content and heavy metals(Hg, Tl) were significant at the 0.01 level. From the correlations between heavy metal concentrations, there were 22 where there were significant at the 0.01 level and they showed positive correlation. Among those, the heavy metals showing the correlation higher than r=0.5, were Sb-V(0.878), Mo-Sn(0.867), Co-V(0.654), Co-Sb(0.648), Be-Sn(0.546), and Sn-Tl(0.528).

• Journal of Environmental Health Sciences
• /
• v.32 no.3
• /
• pp.199-206
• /
• 2006

Various heavy metals have been known for causing ischemic stroke. In order to describe the causative relationship between the blood levels of various heavy metals and stroke patients, 116 patients with stroke and 111 patients without stroke were selected from one Oriental medical hospital in Wonju, Korea. Total of 9 kinds of metals such as As, Cd, Co, Cu, Hg, Mn, Ni, Pb, and Zn were analyzed in blood from patients with and without stroke. There were no significant differences in the means of metal concentrations between the stroke and nonstroke patients except for the mean of Co concentration. In the case of Co, the means for stroke and non-stroke patients were 0.44 ug/l and 0.40 ug/l showing a significant difference at the level of p-value=0.05. The odds ratios for each metal ranged from 0.96 to 2.86. Most odds ratios were not significant but the odds ratio for Co, $2.86{\pm}1.49$ was significant, indicating that Co increases the risk of stroke by 2.86 times. In order to identify the specific risk level of stroke increased by a multiple interaction of metals, regression coefficients and odds ratio for a pair or multiple pair of metals were reanalyzed. However, all of regression coefficients and odds ratios were not significant. In conclusion, Co showed the significant level in blood from patients with stroke. In addition, the odds ratio of stroke was significantly different from other metals. Thus, it is considered that Co among various metals analyzed in this study is the important metal for increasing the risk of stroke.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.1-8
• /
• 2014

The metals contamination of farmland soil nearby abandoned metal mine was serious problem in Korea. Stabilization of contaminated soil was reported using various stabilizers. Application of limestone and steel refining slag was reported as effective stabilizers in the stabilization of metals. The batch studies confirmed that the mixture of limestone and steel refining slag was suitable for stabilization of metals in contaminated soil. The limestone and steel refining slag mixture (2 : 1 and 3 : 2) were used in column studies and it was confirmed that the stabilizers effectively stabilized heavy metals in contaminated soil. The pH of the soil was increased with the addition of stabilizers. Total leached concentration of metals from the column study was reduced 44, 17, and 93% in comparison to the control at arsenic, cadmium and copper, respectively. The sequential extraction studies showed that the exchangeable fraction was changed into carbonate bound fraction (Cd and Cu) and Fe-Mn oxide bound fraction (As). Based on the results we confirmed that 2:1 ratio of limestone and steel refining slag effectively stabilizes the heavy metals. The mixed treatment of lime stone with steel refining slag would be an effective and feasible method for controlling metals leaching in contaminated soil.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.132-134
• /
• 2016

The Study mainly focused on bioremediation of 16 types PAHs and heavy metals in contaminated marine sediments at filed scale study using slow release biostimulant ball (BSB) was investigated. In our experiment, filed scale study ($1m{\times}1m$) was performed and the effect of BSB on PAHs and heavy metals were analysed. BSB size and distance were determined and optimum size and distance were 3cm and 5.5cm respectively. BSB containing nutrients of acetate, nitrate and sulphate which can enhance the activity of microorganism to increase degrading capacity of PAHs and enhance the heavy metals stabilization also to decrease bioavailability. PAHs containing 16 types of 2, 3, 4, 5 and 6 rings compound PAHs were found and to degrade upto 100% in 2, 3 rings, upto 90 to 94% in 4 and 5 rings and 6 ring compound was degrade up to 70%. For heavy metals stabilization percentage was increased using BSB sediment and exchangeable portion was decreased and residual portion was increased in all analysed heavy metals. BSB enhance the PAHs degradation and stabilization of heavy metals percentages. BSB is a promising method for remediation of PAHs and heavy metals in contaminated marine sediments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.930-940
• /
• 2013

We evaluated contamination with organic matter and trace metals by analyzing grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Ni, Cr, Mn, Hg, and As) in surface sediments at 28 stations around the Geum River estuary in July 2008. The surface sediments in the estuary were mainly composed of coarse sediment (sand and muddy sand), with mean grain size (Mz) ranging between $2-4{\O}$. The high concentrations of IL, COD, and trace metals were mainly found at stations in front of the Gusan outer port and industrial complex, and near the Seocheon coast with relatively fine sediments. In addition, the concentrations of IL and all trace metals, except Pb and As, showed good positive correlations with Mz, indicating that the concentrations of organic matter and trace metals were mainly dependent on sediment grain size. The concentrations of COD, AVS, and trace metals in most sediments did not exceed the sediment quality guideline (SQGs). Although the sediments in the study region are not polluted with organic matter and trace metals, there are many point sources of pollutants, such as Gusan port and industrial complex, Janghang refinery, and a thermoelectric power plant around the Geum River estuary. Thus, the management of coastal environments through periodic monitoring of organic matter and trace metals is required in the future.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.90-96
• /
• 2011

Simultaneous removal of heavy metals (Cd, Pb) and diesel-fuel from a soil column was evaluated by respectively flushing with sodium dodecyl sulfate (SDS) solution, mixture of SDS and sodium iodide (SDS + NaI), and surfactant foam (SDS + NaI foam). First, this study evaluated these flushing methods to the heavy metals only-contaminated soil for removal of heavy metals from the heavy-metal only contaminated soil column. After 7 pore volume flushing of the soil column, Cd removal efficiencies from the soil were 40% by SDS solution, 50% by SDS + NaI mixture, and 60% by surfactant foam. The flushing results implied that anionic surfactant and ligand can be efficiently applied to extraction of Cd from the heavy metal contaminated soil. Furthermore, surfactant foam flushing showed an increased flushing efficiency with enhancing the contact between surfactant solution and soil. However, Pb removal efficiency by these flushing methods did not show any difference unlike those of Cd. Second, this study eventually evaluated flushing methods for simultaneous removal of heavy metals and diesel-fuel from the soil column with 7 pore volume flushing. Diesel-fuel removal efficiencies were 50% by SDS + NaI flushing and 90% by SDS + NaI foam flushing. Cd removal efficiency by the foam flushing reached to 80% which was higher than the result of the previous heavy metals onlycontaminated soil experiment. This result implied that diesel-fuel could act as a metal-solvent while it contacted to heavy metals present in the soil. This study clearly showed that surfactant foam flushing simultaneously removed heavy metals and diesel fuel from the soil column.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.75-95
• /
• 2012

BACKGROUND: Increase of heavy metals in agricultural ecosystem has become a social issue nationwide as it is related to public health. This review was performed to find out more systematic and integrated future researches on heavy metals using up to date articles published in the Korean journals related to agricultural environment. METHODS AND RESULTS: Researches on heavy metals in agricultural soils and plant uptake were categorized by the establishment of criteria, analytical methods, monitoring, management of source, characteristics and behavior in soil, plant uptake, bioavailability affecting physico -chemical properties in soil, risk assessment and soil remediation. In the early 1990s, the monitoring for heavy metals in soil has been widely performed. Accumulation of heavy metals in contaminated soil and availability to plants has also attracted interests to study the soil remediation using various physico-chemical methods. The phytoavailability and phytotoxicity of heavy metals have been mainly studied to assess the safety of agro-products using risk assessment techniques in the 2000s. CONCLUSION: Future direction of research on heavy metal in agricultural environment must be carried out by ensuring food safety and sustainability. A steady survey and proper management for polluted regions should be continued. Law and regulation must be modified systematically. Furthermore, studies should expand on mitigation of heavy metal uptake by crops and remediation of polluted fields.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.1
• /
• pp.1-9
• /
• 1997

We investigated the depth profiles of heavy metals in the surface sediments at Heedong reservoir in Pusan. Sampling was done at the intervals of 50 m of drift along the water channel into the reservoir. All samples were analyzed with an ICP-AES. We determined the content of Zn, Pb, Cd, Mn, Cu, Cr, and Fe. The overall mean content of these heavy metals were observed to $(2.9\pm1.2){\times}10^{-3},\;(1.3\pm0.7){\times}10^{-3},$ $(1.9\pm2.1){\times}10^{-4},$ $(2.3\pm1.1){\times}10^{-2},\;(1.6\pm1.0){\times}10^{-3},\;and\;(4.5\pm2.6){\times}10^{-4}$ ppm/ppmFe, respectively excluding iron data. Mean contents of Cu show an increasing trend toward the surface of sediments, while those of Cd show a decreasing trend, and those of Pb and Cr are relatively stable. Comparing with the contents of heavy metals in soils at two sites of Kumjeong mountain, enrichment factors of heavy metals in the surface sediments were determined. Among heavy metals we investigated, copper showed the largest value of enrichment factor. Considering the maximum content of heavy metals in the surface sediment, the values of enrichment factors of Cu, Cd and Cr were significant, which were 22, 8.1 and 4.0, respectively. In leaching experiment, it appeared that Pb, Cd, Cr, and Fe in sediments were hardly leached out into water, We also examined the effect of pH on the content of heavy metals.