• 한국표면공학회지
• /
• 제42권1호
• /
• pp.53-57
• /
• 2009

Recovery of heavy-metallic component from a waste solution of factory was undertaken by the solar cell electricity. The solution was obtained from an electrolytic etching process of 316L stainless steel. The electrolysis of the solution for recovery of heavy metallic components was made with platinum plated titanium mesh anode and copper plate cathode. Analysis for the solution and electro-winned materials were made by EDS, XRD and SEM. Iron, chromium, and sulfur components were recovered on the cathode from the solution. Result of EDS analysis for the electro-winned materials revealed that some metal oxide were contained in the recovered material. The recovered materials were expected to have metallic form only by the electrolysis, but metal compounds were contained because of weak solar cell power. Nickel and manganese component in the solution doesn't recovered by this electrolysis process, but they made a sludge with phosphoric acid in the solution.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.385-385
• /
• 2010

Copper oxide thin films were deposited on the p-type Si(100) by r.f. magnetron sputtering as a function of different oxygen concentration. The deposited copper oxide thin films were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), spectroscopic ellipsometry (SE), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The SEM and SE data show that the thickness of the copper oxide films was in the range of 100-400 nm. AFM images show that the surface morphology was depended on the oxygen ratio. The crystal structure of copper oxide films was changed from metallic copper to copper oxide with increasing oxygen concentration. The oxidation states of Cu 2p and O 1s resulted from XPS were consistent with XRD results.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.996-1007
• /
• 2019

We investigated the influence of the aspect ratio (H/R) of the oxide layer on the reactor vessel heating in three-layer configuration. Based on the analogy between heat and mass transfers, we performed mass transfer experiments to achieve high Rayleigh numbers ranging from $6.70{\times}10^{10}$ to $7.84{\times}10^{12}$. Two-dimensional (2-D) semi-circular apparatuses having the internal heat source were used whose surfaces of top, bottom and side simulate the interfaces of the oxide layer with the light metal layer, the heavy metal layer, and the reactor vessel, respectively. Multi-cell flow pattern was identified when the H/R was reduced to 0.47 or less, which promoted the downward heat transfer from the oxide layer and possibly mitigated the focusing effect at the upper metallic layer. The top boundary condition greatly affected the natural convection of the oxide layer due to the presence of secondary flows underneath the cold light metal layer.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 1999

Verneuil 법에 의해 성장된 무색 sapphire {0001}, ${10\bar{1}0}$ 결정면에 전이금속 Cr을 확산시키고, 물리적, 전기적, 광학적 특성을 개선하였다. 확산분말은 금속산화물 분말과 금속분말을 혼합한 후 사용하였다. 혼합분말을 사용하였을 때 확산은 오랜시간 높은 온도를 필요로 하며 상대적으로 서서히 이루어 졌다. 금속분말은 $1{\times}10^{-4}$ torr, $2050^{\circ}C$의 조건에서 1차 기화하였고 이후 $2050~2150^{\circ}C$, 질소가압 6 atm의 확산조건에서 유지하였다. 사파이어의 표면밀도는 0.2254(c)와 $0.1199\;atom/{\AA}^2(a)$이었다. 확산이 이루어진 sapphires는 붉은색으로 변하였다. 고용반응은 ${10\bar{1}0}$ 결정면이 {0001} 보다 더욱 깊게 확산되었고, 면밀도가 확산효과를 결정하는 주요인자이었다.

• 디지털융복합연구
• /
• 제10권8호
• /
• pp.201-210
• /
• 2012

악취는 사람마다 느끼는 정도가 다르므로 법적 배출허용농도 이내로 배출된다고 하더라도 민원 발생 시 사회적으로 이슈화가 되는 특징이 있다. 본 연구는 산업공정에서 발생된 악취중의 아세트알데히드를 경제적으로 제거하기 위해 Mn-Cu 금속산화물 촉매의 실용화 가능성에 관한 연구이며, 실험실에서 성능평가를 통해 아세트알데히드 제거를 위한 최적 운전인자를 도출하였고, 파일럿 규모의 Scale-up을 통한 현장 실험으로 실제규모 시설에 적용하여 성능을 검증하였다. 지금까지 연구되어진 금속산화물 촉매의 운전온도는 최소 $220^{\circ}C$ 근방에서 아세트알데히드 제거효율이 50% 이하였다. 그러나 본 연구에서 Mn-Cu 금속산화물 촉매를 사용하여 실험한 결과 공간속도(GHSV)가 6,000 $hr^{-1}$ 이하일 때 최적의 제거효율을 보였으며, 촉매제어 온도가 $120^{\circ}C$일 때 평균 제거효율은 61.2%, $160^{\circ}C$에서는 93.3%, $180^{\circ}C$에서는 94.9%로 높은 제거효율을 보였다. 촉매의 비표면적은 사용 전 $200m^2/g$이었으나 24개월 경과 시 $47.162m^2/g$으로 나타나 비표면적은 시간이 지남에 따라 줄어들지만 성능에는 큰 영향이 없었고, 황화합물과 산성가스 등과 같은 피독물질이 유입되지 않는 현장에서 Mn-Cu 금속산화물 촉매장치를 2년 이상 운전한 결과 90% 이상의 제거효율이 유지되고 있는 것을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1258-1260
• /
• 1997

The metallic interconnector has a superior property than the ceramic interconnector in the point of the cell performance, but has problems to form oxide films on the interconnector surface during cell operation and induce cracking in the cell due to the stress by the thermal expansion coefficient difference with stabilized Zr electrolyte. For solving the problems in the metallic interconnector, new and modified materials have been investigated. In this paper, $LaCrO_3$ dispersed Cr was evaluated in high temperature oxidized characteristics, sintering density, electrical conductivity and various thermochemical properties. The test results show that $LaCrO_3$ dispersed Cr has more superior properties than that of conventional alloy interconnector and $LaCrO_3$ dispersed Cr can be used as an interconnector in SOFC.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.106-113
• /
• 1997

The thermal characteristics of two binary mixtures by sodium azide/manganese dioxide and ferric oxide, two ternary mixtures by sodium azide/silicon dioxide/manganese dioxide and ferric oxide were studied to obtain the basic data of gas-generating agents for air bags. The thermal reaction for all mixtures started at about $420^{\circ}C$, but the temperature at which the reaction rate reached a maximum was different with the states of samples. According to reaction results, nitrogen, nitrogen oxide and nitrogen dioxide were detected by GC-MS and so many kinds of new chemicals from sodium azide and metal oxide mixtures by XRD. NMS is considered as most stable and reasonable mixture for this types of gas-generating agents.

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.415-419
• /
• 2004

The electrode potential characteristics of a YSZ based membrane metal oxide electrode have been studied in molten LiCL at $700^{\circ}C$ by the potentiometric method. The electrode exhibited a good potential response to log[$O^2$] and data reproducibility. The calibration plot (potential vs. log[$O^2$] was found to be linear, obeying the Nernst equation. The electrode potential showed a good reversibility corresponding to increase/decrease of the oxide ion present in the molten LiCl. The physical and chemical durability appeared to be sound after several repeated uses, resulting in reproducible results. However, "the proposed electrode" failed when metallic Li was present in the melt.

• Applied Microscopy
• /
• 제43권4호
• /
• pp.173-176
• /
• 2013

The oxidation behavior of the crystallized $Al_{87}Ni_3Y_{10}$ alloy has been investigated with an aim to compare with that of the amorphous $Al_{87}Ni_3Y_{10}$ alloy. The oxidation at 873 K occurs as follows: (1) growth of an amorphous aluminum-yttrium oxide layer (~10 nm) after heating up to 873 K; and (2) formation of $YAlO_3$ crystalline oxide (~220 nm) after annealing for 30 hours at 873 K. Such an overall oxidation step indicates that the oxidation behavior in the crystallized $Al_{87}Ni_3Y_{10}$ alloy occurs in the same way as in the amorphous $Al_{87}Ni_3Y_{10}$ alloy. The simultaneous presence of aluminum and yttrium in the oxide layer significantly enhances the thermal stability of the amorphous structure in the oxide phase. Since the structure of aluminum-yttrium oxide is dense due to the large difference in ionic radius between aluminum and yttrium ions, the diffusion of oxygen ion through the amorphous oxide layer is limited thus stabilizing the amorphous structure of the oxide phase.

• 접착 및 계면
• /
• 제4권2호
• /
• pp.1-9
• /
• 2003

Epoxy-amine liquid prepolymers are extensively applied onto metallic substrates and cured to obtain painted materials or bonded joint structures. Overall performances of such systems depend on the created interphase between the organic layer and the substrate. When epoxy-amine liquid mixtures are applied onto more or less hydrated metallic oxide layer, concomitant amine chemical sorption and hydroxide dissolution appear lending to the chelate formation. As soon as the chelate concentration is higher than the solubility product, these species crystallize as sharp needles. Moreover, intrinsic and thermal residual stresses are developed within painted or bonded systems. When residual stresses are higher than the organic layer/substrate adhesion, buckling, blistering, debonding may occur leading to a catastrophic drop of system performances. Practical adhesion can be evaluated with either ultimate parameters (Fmax or Dmax) or the critical strain energy release rate, using the three point flexure test (ISO 14679-1997). We observe that, for the same system, the ultimate load decreases while residual stresses increase when the liquid/solid time increases. Ultimate loads and residual stresses depend on the metallic surface treatment. For these systems, the critical strain energy release rate which takes into account the residual stress profile and the Young's modulus gradient remains quite constant whatever the metallic surface treatment was. These variations will be discussed and correlate to the formation mechanisms of the interphase.