• 제목/요약/키워드: metal separation

검색결과 543건 처리시간 0.033초

폐 Ni-Cd전지로부터 Ni의 분리 및 회수에 관한 연구 (Recovery and Separation of Nickel from the Spent Ni-Cd Batteries)

  • 김종화;남기열
    • 자원리싸이클링
    • /
    • 제9권2호
    • /
    • pp.11-17
    • /
    • 2000
  • 니켈의 소비량은 계속 중가 추세에 있으며, 이와 함께 2차전지, 페라이트 페촉매는 사용 후의 폐기물이 연속적으로 발생하고 있다. 이들 중 본 연구에서는 Ni-Cd 2차전지 폐기물을 이용하여 니켈 회수를 수행하였다 폐전지의 구성은 니켈이 24wt% 칠이 30wt%, 카드뮴이 18.5wt%, 그리고 산소와 절연물 등으로 이루어져 있었다. 금속 회수의 방법은 침출 후 용매 추출법을 적용하였다. 염산침출에서는 1N 이상의 농도에서 카드뮴이 100% 침출되었고, 니켈은 20,000ppm이상 침출되어 70%이상의 침출율을 보였다. 산침출에서 얻은 침출액은 30vol%의 MSP-8로서 카드뮴만 추출하고 니켈은 잔류액으로 분리할 수 있었다. 그리고 암모늄염에 의한 침출에서는 $NH_4NO_3$에 의한 침출 시 니켈과 카드뮴만을 선택적으로 침출하는데 우수하였다. 질산암모늄에 의해 얻은 침출액 중의 Ni LIX계 추출제를 이용하여 100% 회수할 수 있었고, 잔류액 중의 카드뮴은 D2EHPA로 75% 이상 회수할 수 있었다.

  • PDF

Chiral Mesoporous Silica for Asymmetric Metal-free Catalysis: Enhancement of Chirality thorough Confinement Space by Plug Effect

  • 정은영;임청래;박상언
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.199-199
    • /
    • 2011
  • The addition of a carbanion to ${\yen}{\acute{a}}{\yen}{\hat{a}}$-unsaturated carbonyl compounds is of importance in the C-C bond formation reactions for modern pharmaceuticals and organic synthesis. Recently, heterogeneous asymmetric catalysis became more attractive area of research because of the easy recovery and separation of the catalyst from the reaction system. Most of synthetic methods for heterogeneous catalysts were grafting or immobilization of homogeneous catalyst onto the solid supports. Trans-1,2-Diaminocyclohexane(DACH) and L-proline ligands have been enormously used as chiral ligands in several catalytic transformation under homogenous conditions. Our group prepared l-proline functionalized mesoporous silica was synthesized under acidic condition using a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer template (EO20PO70EO20, Pluronic P-123, BASF). Furthermore, we successfully directly synthesized trans-1,2 diaminocyclohexane functionalized mesoporous silica by using microwave method. The direct functionalization of chiral ligand into the framework of mesoporous materials is expected to be useful for the heterogeneous asymmetric catalysis. So, we adopt the direct synthesis of chiral ligand functionalized mesoporous silica by using thermal and microwave irradiation. Then, chiral ligand functionalized mesoporous silicas were applied to enantioselective asymmetric catalytic reactions.

  • PDF

CVD 법으로 제조한 실리카 막의 Ga 염 첨가에 따른 스팀안정성 및 기체투과특성 (Gas Permeation and Steam Stability of Ga Salt Doped Silica Membrane by Chemical Vapor Deposition)

  • 류승희;이용택
    • 멤브레인
    • /
    • 제22권6호
    • /
    • pp.424-434
    • /
    • 2012
  • 본 연구에서는 CVD법으로 세라믹 막을 제조하였다. 튜브의 ${\alpha}-Al_2O_3$ 지지체 위에 Ga 염이 첨가된 ${\gamma}-Al_2O_3$를 코팅하였고, 실란화합물인 tetramethylorthosilane (TMOS) 를 $650^{\circ}C$에서 화학적 기상 증착법으로 막에 증착하였다. 제조된 세라믹 막을 사용하여 수소, 질소, 이산화탄소, 메탄의 단일조성 기체투과 실험을 $600^{\circ}C$에서 시행하였다. Ga 염 비첨가 시, $600^{\circ}C$ 수분 처리 실험의 $H_2/N_2$ 선택도가 926에서 829로 감소한 반면, Ga 염 첨가 시에는 910에서 904로 안정하였다. 이 결과를 통해, 막에 금속염을 첨가하여 제조한 막이 수분 안정성을 향상시킴을 확인하였다.

접촉피로에 있어서 균열의 발생과 진전특성 (Characteristic of Crack Growth and Progress on the Contact Fatigue (In a case of Metal))

  • 유성근
    • 한국재료학회지
    • /
    • 제7권1호
    • /
    • pp.62-68
    • /
    • 1997
  • 본 연구에서는 접초피로에 있어서 균열의 발생, 진전 등의 관찰을 위해, 균열의 발생, 진전 등이 2차원적으로 되어 시험편측면에서 관찰이 가능한 평판 ring형 시험편을 이용하여 반복수 증대에 따른 균열의 발생, 진전과정을 조사하였다. 그 결과 pitting, flaking형 파손의 초기손상은 접촉면하의 내부에 생기는 접촉면에 평행방향의 균열에 의해 일어나며, 이 균열은 그 방향 밀 파면형태에 의해 접촉응력이 접촉면에 평행방향의 전단응력성분에 의한 모드 ll 피로진전과의 차는 중첩부하된 압축응력의 유무라고 생각되며, 이 가저에 근거로 하여 재료고유의 모드 ll 피로균열진전특성을 구할 수 있는 장치를 개발하였다. 이 장치를 이용하여 알루미륨합금 및 공구강에 대한 da/dN-${\Delta}k$ ll 관계의 시험결과를 얻었다.

  • PDF

원전발생 방사성폐기물 시료 중 초우란원소의 정량 (Determination of Transuranic Elements in Radwaste Samples from Nuclear Power Plant)

  • 조기수;김태현;전영신;지광용;김원호
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2003년도 가을 학술논문집
    • /
    • pp.351-357
    • /
    • 2003
  • 원전발생 방사성폐기물 시료 중 TRU를 정량하기위해 모의 사용 후 핵연료 시료 용액 중 Pu, Am 및 Cm 을 이온교환수지 및 HDEHP 추출크로마토그래피로 분리한 다음 알파분광분석법으로 각 핵종의 함량을 정량하였다. Dowex AG1 음이온수지 에서 12M HC1-0.lMHI 용리액으로 Pu를 분리하고 이차분리관인 HDEHP 흡착 분리 관에서 DTPA-Lactic Acid 용리액으로 Am과 Cm을 군분리하였다. 분리된 Pu, Am 및 Cm은 0.1M $NaHSO_4$-0.53M $Na_2SO_4$ 매질에서 전착한 다음 알파분광분석법으로 $^{239}Pu$, $^{241}Am$$^{244}Cm$의 알파에너지의 방사능을 측정하여 회수율을 추하였다. 비방사성 금속원소 및 우라늄을 포함하는 합성용액 시료중 $^{239}Pu$, $^{241}Am$$^{244}Cm$ 을 측정한 결과 각각 83.8%, 85.2% 및 86.3% 의 회수율을 나타내었다.

  • PDF

인공태양을 이용한 모노리스 적용 반응기에서 2단계 열화학적 물분해 연구 (2-Step Thermochemical Water Splitting on a Active Material Washcoated Monolith Using a Solar Simulator as Heat Source)

  • 강경수;김창희;박주식
    • 한국수소및신에너지학회논문집
    • /
    • 제18권2호
    • /
    • pp.109-115
    • /
    • 2007
  • Solar energy conversion to hydrogen was carried out via a two-step thermochemical water splitting using metal oxide redox pair. To simulate the solar radiation, a 7 kW short arc Xe-lamp was used. Partially reduced iron oxide and cerium oxide have the water splitting ability, respectively. So, $Fe_3O_4$ supported on $CeO_2$ was selected as the active material. $Fe_3O_4/CeO_2$(20 wt/80 wt%) was prepared by impregnation method, then the active material was washcoated on the ceramic honeycomb monolith made of mullite and cordierite. Oxygen was released at the reduction step($1673{\sim}1823\;K$) and hydrogen was produced from water at lower temperature($873{\sim}1273\;K$). The result demonstrate the possibility of the 2-step thermochemical water splitting hydrogen production by the active material washcoated monolith. And hydrogen and oxygen was produced separately without any separation process in a monolith installed reactor. But the SEM and EDX analysis results revealed that the support used in this experiment is not suitable due to the thermal instability and coating material migration.

기체분무형 공정으로 제조된 Zr계 금속수소화물의 수소화반응 및 Ni-MH 2차전지 전극 특성에 관한 연구 (Hydrogneation and Electrochemical Characteristics of Gas-atomized Zr-based $AB_2$ Hydride for Ni-MH Secondary Battery)

  • 김진호;황광택;김병관;한정섭
    • 한국수소및신에너지학회논문집
    • /
    • 제20권6호
    • /
    • pp.505-511
    • /
    • 2009
  • The hydriding and electrochemical characteristics of Zr-based $AB_2$ alloy produced by gas atomization have been extensively examined. For the particle morphology of the as-cast and gas-atomized powders, it can be seen that the mechanically crushed powders are irregular, while the atomized powder particles are spherical. The increase of jet pressure of gas atomization process results in the decrease of hydrogen storage capacity and the slope of plateau pressure significantly increases. TEM and EDS studies showed the increase of jet pressure in the atomization process accelerated the phase separation within grain of the gas-atomized alloy, which brought about a poor hydrogenation property. However, the gas-atomized $AB_2$ alloy powders produced by jet pressure of 50 bar kept up the reversible $H_2$ storage capacity and discharge capacity similar to the mechanically crushed particles. In addition, the electrode of gas-atomized Zr-based $AB_2$ alloy of 50 bar showed improved cyclic stability over that of the cast and crushed particulate, which is attributed to the restriction of crack propagation by grain boundary and dislocation with ch/discharging cycling.

브랜치 도서관디자인의 공공성 표현에 관한 연구 - 미국 마리코파 카운티를 중심으로 - (A Study on the Expression of the Publicness on Public Branch Library Design - Focus on the Maricopa County, USA -)

  • 손광호
    • 한국실내디자인학회논문집
    • /
    • 제21권6호
    • /
    • pp.271-279
    • /
    • 2012
  • Among the community-based cultural facilities, public libraries are places for social and educational purpose that improve the education of the resident, the expansion of the basic cultural education, communication between the members of society, and the accumulations and preservations of the culture. Public libraries should be a local cultural facility that expresses the value of a community. This study aims to analyze the design expression of publicness in a public branch library as a community-based cultural space through the study of branch library in the U.S. This study focused on the most future-oriented and innovative Ten New Landmark Libraries in the United States selected by Library Journal magazine in 2011. Among the selected libraries, three branch libraries which belongs Arizona Maricopa County were included in the study. The results of this study are as follows. First, the sites of the branch libraries vary geographically, but the libraries increase accessibility are caused by unique appearances and design concept of intellectual interest. Second, the floor plan shows the separation of meeting rooms and faculty space from the public space and has visual and spatial open space by high ceiling of the reading room. Third, multi-functional public space for residents are meeting rooms, the external patios for reading, galleries, cafes, libraries-shops which provides a variety of cultural programs, activities, and the opportunity to socialize neighbors. Fourth, branch Libraries have unique designs that harmonizes with nearby places to reflect locality, giving the locals a sense of pride in their community. Fifth, concrete brick and metal panel were used as finishing material for the practicality of maintenance. In particular, transparent glass envelope allows the locals to stay for long time due to openness and brightness of space.

  • PDF

$CuCl_2-NiCl_2-CoCl_2$용액으로부터 Alamine336과 LIX84에 의한 구리의 용매추출 (Solvent Extraction of Copper from $CuCl_2-NiCl_2-CoCl_2$ Solutions by Alamine336 and LIX84)

  • 이만승;안종관;안재우
    • 자원리싸이클링
    • /
    • 제11권6호
    • /
    • pp.12-17
    • /
    • 2002
  • $CuCl_2$-$NiCl_2$-$CoCl_2$용액으로부터 구리를 분리하기 위해 추출제로 Alamine336과 LIX84를 사용하여 추출실험을 하였다. 염산용액에서 Alamine336과 LIX84에 의한 구리, 코발트, 니켈의 분배계수와 구리의 분리계수는 금속이온과 염소이온간에 형성되는 착물의 농도에 큰 영향을 받았다. 염소이온농도가 0.5에서 4.0M사이인 용액에서 코발트로부터 구리의 분리성은 LIX84가 Alamine336보다 우수하였다. 염소이온농도가 1.0M인 용액에서 LIX84와 Alamine336의 부피백분율을 5에서 40%까지 변화시켜 추출한 결과 LIX84로 추출하는 경우 Alamine336에 비해 더 높은 구리의 분리계수를 얻었다.

머신비젼 시스템을 이용(利用)한 스크랩 자동선별(自動選別) 연구(硏究) (Machine Vision Applications in Automated Scrap-separating Research)

  • 김찬욱;김행구
    • 자원리싸이클링
    • /
    • 제15권6호
    • /
    • pp.3-9
    • /
    • 2006
  • 본 연구에서는 색도인식이 가능한 버신 비젼시스템을 설계 제작하고, 제작한 시스템을 이용하여 철스크랩에 혼합되어 있는 Cu스크랩을 자동으로 분리하는 시험연구를 행하였다. 머신비젼시스템은 크게 측정부, 이송부 그리고 ejector로 구분되며, CCD카메라, 광원 및 frame grabber로 구성된 측정부에서 이메지 프로쎄싱 알고리즘에 의해 이송되어 오는 스크랩 표면의 색도를 인식하게 된다. 또한 그 인식결과에 따라 I/O interface가 구성된 콘트롤러에 의해 에어노즐을 작동하도록 하여 임의로 지정한 특정 표면색상의 스크랩만을 분리하도록 되어 있다. 본 시스템을 이용하여 철스크랩에 포함된 Cu스크램의 선별실험을 수행한 결과, 스크랩 이송속도가 15 m/min.에서 90%이상의 선별효율을 나타내어, 향후 선별기능의 고속화가 실현될 경우 산업적으로 적용 가능성이 매우 높은 것으로 판단되었다.