• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.92-98
• /
• 2010

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.26-33
• /
• 2014

The metallurgical and mechanical characteristics, toughness and corrosion resistance of dissimilar welds between super duplex stainless steel UNS S32750 and carbon steel ASTM A516Gr.70 have been evaluated. Three heat inputs of 21.12, 24.00, 26.88kJ/cm were employed to make joints of dissimilar metals with flux cored arc welding(FCAW). Based on microstructural examination, vermicular ferrite was formed in the first layer of weld at low heat input(21.12kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.61 while acicular ferrite was formed in last layer of weld at high heat input(26.88kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.72. Ferrite percentage in dissimilar welds was lowest in the first layer of weld regardless of heat inputs and it gradually increased in the second and third layers of weld. Heat affected zone showed higher hardness than the weld metal although reheated zone showed lower hardness than weld metal due to the formation of secondary austenite. Tensile strengths of dissimilar welds increased with heat input and there was 100MPa difference. The corrosion test by ferric chloride solution showed that carbon steel had poor corrosion resistance and pitting corrosion occurred in the first layer(root pass) of weld due to the presence of reheated zone where secondary austenite was formed. The salt spray test of carbon steel showed that the surface only corroded but the amount of weight loss was extremely low.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.61-68
• /
• 2016

Characteristics of dissimilar metal welds between alloy steel ASTM A387 Gr. 91 and carbon steel ASTM A516 Gr.70 made with Flux cored arc welding(FCAW) have been evaluated in terms of microstructure, mechanical strength, chemical analysis by EDS as well as corrosion test. Three heat inputs of 15.0, 22.5, 30.0kJ/cm were employed to make joints of dissimilar metals with E91T1-B9C wire. Post-weld heat treatment was carried out at $750^{\circ}C$ for 2.5 h. Based on microstructural examination, tempered martensite and lower bainite were formed in first layer of weld metal. The amount of tempered martensite was decreased and the amount of lower bainite was increased with increasing heat input and layer. Heat affected zone of alloy steel showed the highest hardness due to the formation of tempered Martensite and lower Bainite. Tensile strengths of dissimilar welds decreased with increasing heat inputs. Dissimilar welds seemed to have a good hot cracking resistance due to the low HCS index below 4. The salt spray test of dissimilar metals showed that the corrosion rate increased with increasing heat inputs due to the increase of the amount of lower Bainite.

• 한국대기환경학회지
• /
• 제20권5호
• /
• pp.685-695
• /
• 2004

Size-segregated measurements of aerosol composition are used to estimate the transport of natural and anthropogenic aerosols at Gosan site during May 2002. The results of measurement show that not only soil dust but also anthropogenic aerosols, including sulfur and enriched trace metals such as Pb, Zn, Cu, are transported to Gosan. This study combines the size- and time-resolved aerosol composition measurements with factor analysis in order to identify some source materials. As a result, coarse particles (2.5${\mu}m$~12${\mu}m$) are influenced by soil, sea-salt, coal, coal combustion, and nonferrous sources. But fine particles have different sources. The fine particles, which the diameter is from 0.56${\mu}m$ to 2.5${\mu}m$, are more affected by road dust, oil combustion, industry. municipal incineration, and ferrous metal sources. The very fine particles, from 0.09${\mu}m$ to 0.56${\mu}m$, mainly supplied by biomass burning, oil combustion, nonferrous and ferrous metal sources.

• 한국환경과학회지
• /
• 제18권7호
• /
• pp.735-746
• /
• 2009

Hydrochloric acid salt of a new $N_2O_3$ pentadentate ligand, N,N'-Bis(2-Hydroxybenzyl)-1,3-diamino-2-propanol(H-BHDP 2HCl) was synthesized. Br-BHDP 2HCl, CI-BHDP 2HCl, $CH_3-BHDP$ 2HCl and $CH_3O$-BHDP 2HCl having Br, Cl, $CH_3$ and $CH_3O$ substituents at 5-position of the phenol group of H-BHDP 2HCl were also synthesized. The potentiometry study in aqueous solution revealed that the proton dissociations of the synthesized ligands occurred in four steps and their order of the calculated overall proton dissociation constants($log{\beta}_p$) was Br-BHDP < Cl-BHDP < H-BHDP < $CH_3O-BHDP$ < $CH_3-BHDP$. The order showed a similar trend to that of Hammett substituent constants(${\delta}_p$). The order of the stability constants($logK_{ML}$) was Co(II) < Ni(II) < Cu(II) < Zn(II) < Cd(II) < Pb(II). The order in their stability constants ($logK_{ML}$) of each transition metal complex agreed with that of the overall proton dissociation constants ($log{\beta}_p$).

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.37-43
• /
• 2015

Characteristics of dissimilar metal welds between STS 316L and carbon steel ASTM A516 Gr.70 made with GTAW have been evaluated in terms of microstructure, ferrite content, chemical analysis, hardness and corrosion resistance. Three heat inputs of 9.00, 11.25, 13.00kJ/cm were employed to make joints of dissimilar metals with ER309 wire. Based on microstructural examination, the amount of vermicular type of ${\delta}$-ferrite was increased with increasing heat input due to the increase of Creq/Nieq in the second layer of welds. Based on the EDX analysis of weld metals, Cr and Ni content in the 2nd layer increased while those content in the first layer of welds decreased with heat inputs. Cellular solidification mode in the 1st layer and dendritic solidification mode in the 2nd layer due to different cooling rates were prevailed, respectively. Heat affected zone which formed hard microstructure showed higher hardness than the weld metal. The salt spray test of dissimilar metals weld joints showed that the carbon steel surfaces only corroded. The weight loss rate due to corrosion increased up to 100hours but it decreased above 100 hours. There was little difference in the weight loss caused by corrosion regardless of heat inputs.

• 미생물학회지
• /
• 제34권3호
• /
• pp.82-86
• /
• 1998

Yarrowia lipolytica 504D가 생산하는 alkaline proteinase를 정제한 결과, 분자량은 32,000으로 나타났고, pH 9.5와 $42^{\circ}C$에서 최적활성을 보였으며, pH 4-10의 범위와 $45^{\circ}C$까지 비교적 안정한 것으로 나타났다. PMSF를 비롯하여 EDTA, EGTA, phenanthrolin도 효소활성을 저해하여 정제효소가 serine proteinase인지 metal proteinase인지 불확실하였다. 그러나 28% 활성증가를 보인 $Cu^{2+}$ 외에 $Zn^{2+}$를 비롯한 대부분의 무기염들이 효소활성을 증가시키지 못하였고, 또한 EDTA의 첨가로 불활성화된 효소도 Ca 염의 첨가로 활성이 복원되었다. 따라서 정제효소는 serine proteinase(E.C. 3.4.21.14)로 추정되었다.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.401-422
• /
• 2005

We review here research and development progress achieved in US Plasma Chamber technology roughly over the last decade. In particular, we focus on two major programs carried out in the US: the APEX project (1998-2003) and the US ITER TBM activities (2003-present). The APEX project grew out of the US fusion program emphasis in the late 1990s on more fundamental science and innovation. APEX was commissioned to investigate novel technology concepts for achieving high power density and high temperature reactor coolants. In particular, the idea of liquid walls and the related research is described here, with some detailed examples of liquid metal and molten salt magnetohydrodynamic and free surface effects on flow control and heat transfer. The ongoing US ITER Test Blanket Module (TBM) program is also described, where the current first wall/blanket concepts being considered are the dual coolant lead lithium concept and the solid breeder helium cooled concepts, both using ferritic steel structures. The research described for these concepts includes both thermofluid MHD issues for the liquid metal coolant in the DCLL, and thermomechanical issues for ceramic breeder packed pebble beds in the solid breeder concept. Finally, future directions for ongoing research in these areas are described.

• Elastomers and Composites
• /
• 제37권3호
• /
• pp.170-176
• /
• 2002

공정조제의 성분 및 함량이 styrene-butadiene rubber (SBR) 배합고무의 유변학적 특성과 기계적 물성에 미치는 영향을 조사하였다. 공정조제로 지방산, 지방산 유도 금속염, 에스테르 알코올, 아미드 성분을 단독 혹은 혼합한 5종의 상용제품을 선택하였다. 공정조제 첨가에 따른 무니점도와 전단점도의 감소는 금속염이 주성분인 공정조제가 가장 컸고, 고분자량의 지방산 알콜이나 에스터의 함량이 높은 공정조제가 낮았다. 공정조제의 함량증가에 따라 인장 모듈러스는 감소하고, 발열은 증가하는 경향을 나타내었지만, 극한물성인 인장강도와 파단신장율에는 그다지 큰 영향을 미치지 않았다.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.381-387
• /
• 2018

Our study focuses on upgrading real biogas obtained under Indian scenario using carbon capture and utilization (CCU) technology to remove carbon dioxide ($CO_2$) and utilize it by forming metal carbonate. Amines such as monoethanolamine (MEA), diethanolamine (DEA), and sodium hydroxide (NaOH) were used to rapidly convert gaseous $CO_2$ to aqueous $CO_2$, and $BaCl_2$ was used as an additive to react with the aqueous $CO_2$ and rapidly precipitating the aqueous $CO_2$. All experiments were conducted at $25^{\circ}C$ and 1 atm. We analyzed the characteristics of the $BaCO_3$ precipitates using X-ray diffractometry (XRD), scanning electron microscopy - Energy dispersive spectroscopy (SEM-EDS) and Fourier-transform infrared spectroscopy (FT-IR) analyses. The precipitates exhibited witherite morphology confirmed by the XRD results, and FT-IR confirmed that the metal salt formed was $BaCO_3$, and EDS showed that there were no traces of impurities present in it. The quantity of the $BaCO_3$ was larger when formed with DEA. Also, a comparison was done with a previous study of ours conducted in Korean conditions. Finally, we observed that the carbonate obtained using real biogas showed similar properties to carbonates available in the market. An economic analysis was done to show the cost effectiveness of the method employed by us.