• YAKHAK HOEJI
• /
• v.41 no.2
• /
• pp.225-232
• /
• 1997

The in vitro antibacterial activity of DWP20367 (1-Cyclopropyl-6-fluoro-8-chloro-7-(2,7-diazabicyclo[3,3,0]oct-4-ene-7-yl)-1,4-dihydro-4-oxoquinoline-3-carboxylic acid), a new broad-spectrum fluoroquinolone, was compared with those of ciprofloxacin (CPFX), sparfloxacin (SPFX) and ofloxacin (OFLX). DWP20367 was showed antibacterial activity much higher than CPFX, SPFX and OFLK against gram-positive bacteria, while it was slightly more superior to quinolones against gram-negative bacteria. DWP20367 was particularly effective against MRSA, and its $MlC_{90}$ against clinical isolates of methicillin-susceptible S. aureus, low methicillin-resistant S. aureus and high methicillin-resistant S. aureus were 0.098, 0.781 and 1.563 micro g/ml, respectively. Against S. pneumoniae, MIC90 of DWP20367 was 2- to 8-fold higher than those of CPFX. With a view of MIC90, DWP20367 showed slightly more potent activity against P. aeruginosa and E. coli isolates than the control quinolones. DWP20367 activity was not affected by inoculum size and medium pH. But addition of $Mg^{2+}, \;Ca^{2+} $Mg2+, Ca2+ or horse serum (25%) decreased its antibacterial activity. DWP20367 was showed rapidly bactericidal activity within 2 to 4 h, and regrowth was not observed even after 24 h incubation at concentrations near the 4-fold of MIC.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.319-319
• /
• 2011

Hydrolysis of sodium borohydride provides a safe and clean approach to hydrogen generation. Having the proper catalytic support for controlling this reaction is therefore a valuable technology. Here we demonstrate the capability of hydroxyapatite as a novel catalytic support material for hydrogen generation. Aside from being inexpensive and durable, we reveal that Ru ion exchange on the HAP surface provides a highly active support for sodium borohydride hydrolysis, exemplifying a high total turnover number of nearly 24,000 mol $H_2$/ mol Ru. Moreover, we observe that the RuHAP support exhibits a high catalytic lifetime of approximately one month upon repeated exposure to $NaBH_4$ solutions. In addition to examining surface area effects, we also identified the role of complex surface morphology in enhancing hydrolysis by the catalytic transition metal covered surface. Particularly, we found that a polycrystalline RuHAP catalytic support exhibits shorter induction times for the initial bubble formation as well as increased hydrogen generation rates as compared to a single crystal supports. The independent factor of a complex surface morphology is believed to provide enhanced sites for gas release during the initial stages of the reaction. By demonstrating the ability to shorten induction time and enhance catalytic activity through changes in surface morphology and Ru content, we find it feasible to further explore this catalyst support in the construction of a practical hydrogen generator.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.227-236
• /
• 2012

Ionomer is a thermoplastic that is composed of covalent bonds and ionic bonds. It is possible to use this material in processes such as injection molding or extrusion molding due to the material's high oil resistance, weatherproof characteristics, and shock resistance. In this study, a new ionomer having a multifunctional group was prepared by a stepwise neutralization system with the addition of acidic and salt additives. In step I, to increase the contents of the multifunctional group and the acid degree in ethylene acrylic acid (EAA), MGA was added to the ionomer resin (EAA). A new ionomer was prepared via the traditional preparation method of the ionic cross-linking process. In step II, metal salt was added to the mixture of EAA and MGA. The extrusion process was performed using a twin extruder (L/D = 40, size : ${\varphi}30$). Ionomer film was prepared for evaluation of gas permeability by using the compression molding process. The degree of neutralized and ionic cross-linked new ionomer was confirmed by FT-IR and XRD analysis. In order to estimate the neutralization of the new ionomer film, various properties such as gas permeation and mechanical properties were measured. The physical strength and anti-scratch property of the new ionomer were improved with increase of the neutralization degree. The gas barrier property of the new ionomer was improved through the introduction of an ionic site. Also, the ionic degree of cross-linking and gas barrier property of the ionomer membrane prepared by stepwise neutralization were increased.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.492-497
• /
• 1989

The antioxidant effects against linoleic acid of various protein hydrolysates from fish protein, defatted soybean cake, egg albumin and casein were investigated. Each protein hydrolysate by enzyme hydrolysis exhibited the antioxidative effects by addition of 5mg and 10mg per 1g linoleic arid. Especially, egg albumin and fish protein hydrolysates had a great antioxidative effects. The protein hydrolysates indicated the synergitic effects with ${\alpha}-tocopherol$, and indicated scavenging effects toward metal ion $(Fe^{3+},\;Cu^{2+})$ as prooxidants.

• Korean Journal of Acupuncture
• /
• v.22 no.2
• /
• pp.127-149
• /
• 2005

This study is designed to investigate the method of manufacturing herbal acupuncture through literature of oriental medicine. The findings of this study are as follows; 1. The methods of manufacturing herbal acupuncture go through the process of abstraction, purification, mixing, filtration, putting and tight sealing in the container, sterilization, quality control, printing and packing 2. There are many ways to manufacturing herbal acupuncture, for example water-alcohol precipitation, alcohol-water precipitation, liquid-liquid abstract, acid-base abstract, metal base precipitation, distillation, molecular structure, polyamide absorption, dialysis, and ion exchange, etc. And popular method is water-alcohol precipitation. This is through alcohol precipitate extracting the principal ingredients from water abstraction. This is very simple and efficient way using melting characteristics of compounds in herb to water and ethanol. 3. Sterilization of herbal acupuncture is through heating-pressure, boiling, steam flowing, low temperature, filtering, radiation, cooling, and microwaves. Nowadays filtering is commonly used. And sterilization is estimated by an examination of asepsis . 4. Herbal acupuncture must be undergo study and experiment to clinical use. The problems of herbal acupuncture are turbidity, instability, causing hemolysis, pain, and fever. So many provisions (addition, sterilization, and filtration etc.) must be prepared. 5. The theory of manufacturing herbal acupuncture is from oriental medicine, not western. So it must be corresponded to oriental medical theory, for example Gimi(氣味), Guigyung(歸經), Ingyung(引經), Bosa(補瀉), and Match of Herb. It is recommended that further study of many other sided investigations in the future.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.40-44
• /
• 2008

Passive metal forms an interfacial diffuse layer on the surface of passive film by its reaction with $H^+$ or $OH^-$ ions in solution depending on solution pH. There is a critical pH, called pH point of iso-selectivity ($pH_{pis}$) at which the nature of the diffuse layer is changed from the anion-permeable at pH<$pH_{pis}$ to the cation-permeable at pH>$pH_{pis}$. The $pH_{pis}$ for a passivated Fe was determined by examining the effects of pH on the thickness of passive film and on the dissolution reaction occurring on the passive film under a gavanostatic reduction in borate-phosphate buffer solutions at various pH of 7~11. The steady-state thickness of passive film formed on Fe showed the maximum at pH 8.5~9, and further the nature of film dissolution reaction was changed from a reaction producing $Fe^{3+}$ ion at $pH\leq8.5$ to that producing $FeO_2{^-}$ at $pH\geq9$, suggesting that the $pH_{pis}$ of Fe is about pH 8.5~9. In addition, the passive film formed at pH 8.5~9, $pH_{pis}$, was found to be the most protective with the lowest defect density as confirmed by the Mott-Schottky analysis. Pitting potential was decreased with increasing $Cl^-$ concentration at $pH\leq8.5$ due probably to the formation of anion permeable diffuse layer, but it was almost constant at $pH\geq9$ irrespective of $Cl^-$ concentration due primarily to the formation of cation permeable diffuse layer on the film, confirming again that $pH_{pis}$ of Fe is 8.5~9.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.47-47
• /
• 2003

The presenilin 1 (PS1) or PS2 is an essential component of the ${\gamma}$-secretase complex, which mediates the intramembrane proteolysis of selected type-I membrane, including the ${\beta}$-amyloid precursor protein (APP) to yield A${\beta}$. Familial Alzheimer's disease (FAD)-associated mutations in presenilins give rise to an increased production of a highly amyloidogenic A${\beta}$42. In addition to their well-documented proteolytic function, the presenilins play a role in calcium signaling. We have previously reported that presenilin FAD mutations cause highly consistent alterations in intracellular calcium signaling pathways, which include deficits in capacitative calcium entry (CCE), the refilling mechanism for depleted internal calcium stores. However, molecular basis for the presenilin-mediated modulation of CCE remains to be elucidated. In the present study, whole-cell patch clamp method was used to identify a specific calcium-permeable ion channel current(s) that is responsible for the CCE deficits associated with FAD-linked PS1 mutants. Unexpectedly, both voltage-activated and conventional store depletion-activated calcium currents I(CRAC), were absent in HEK293 cells, which were stably transfected either with wild-type or FAD mutant (L286V, M146L, and delta E9) forms of PS1. Recently, magnesium-nucleotide-regulated metal cation current, or I(MagNum), has been described and appears to share many common properties with I(CRAC) including calcium permeability and inhibitor sensitivity (e.g. 2-APB). We have detected I(MagNum) in all 293 cells tested. Interestingly, FAD mutant 293 cells developed only about half of currents compared to PS1 wild type cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.117-117
• /
• 2008

In MIM capacitor, poly-Si bottom electrode is replaced with metal bottom electrode. Noble metals can be used as bottom electrodes of capacitors because they have high work function and remain conductive in highly oxidizing conditions. In addition, they are chemically very stable. Among novel metals, Ru (ruthenium) has been suggested as an alternative bottom electrode due to its excellent electrical performance, including a low leakage of current and compatibility to high dielectric constant materials. Chemical mechanical planarization (CMP) process has been suggested to planarize and isolate the bottom electrode. Even though there is a great need for development of Ru CMP slurry, few studies have been carried out due to noble properties of Ru against chemicals. In the organic chemistry literature, periodate ion ($IO_4^-$) is a well-known oxidant. It has been reported that sodium periodate ($NaIO_4$) can form $RuO_4$ from hydrated ruthenic oxide ($RuO_2{\cdot}nH_2O$). $NaIO_4$ exist as various species in an aqueous solution as a function of pH. Also, the removal mechanism of Ru depends on solution of pH. In this research, the static etch rate, passivation film thickness and wettability were measured as a function of slurry pH. The electrochemical analysis was investigated as a function of pH. To evaluate the effect of pH on polishing behavior, removal rate was investigated as a function of pH by using patterned and unpatterned wafers.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.144-149
• /
• 2001

For the production and purification of a single chain human insulin precursor, four types of fusion peptides $\beta$-galactosidase (LacZ), maltose binding protein (MBP), glutathione-S-transferase (GST), and (His)(sub)6-tagged sequence (HTS) were investigated. Recombinant E. coli harboring hybrid genes was cultivated at 37$\^{C}$ for 1h, and gene induction occurred when 0.2mM of isopropyl-D-thiogalactoside (IPTG) was added to the culture broth, except for E. coli BL21 (DE3) pLysS harboring a pET-BA cultivation with 1.0mM IPTG, followed by a longer than 4h batch fermentation respectively. DEAE-Sphacel and Sephadex G-200 gel filtration chromatography, amylose affinity chromatography, glutathione-sepharose 4B affinity chromatography, and a nickel chelating affinity chromatography system as a kind of immobilized metal ion affinity chromatography (IMAC) were all employed for the purification of a single chain human insulin precursor. The recovery yields of the HTS-fused, GST-fused, MBP-fused, and LacZ-fused single chain human insulin precursors resulted in 47%, 20%, 20%, and 18% as the total protein amounts respectively. These results show that a higher recovery yield of the finally purified recombinant peptides was achieved when affinity column chromatography was employed and when the fused peptide had a smaller molecular weight. In addition the pET expression system gave the highest productivity of a fused insulin precursor due to a two-step regulation of the gene expression, and the HTS-fused system provided the highest recovery of a fused insulin precursor based on a simple and specific separation using the IMAC technique.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.378-384
• /
• 2003

Etching species in CF$_4$/Ar plasma and the behavior of etching rate of Bi$_4$-$_{x}$L$_{x}$rTi$_3$O$_2$ (BLT) films were investigated in inductively coupled plasma (ICP) reactor in terms of etch parameters. The etching rate as functions of CF$_4$ contents showed the maximum 803 $\AA$/min at 20% CF$_4$ addition in CF$_4$/Ar plasma. The increase of RF power and DC bias voltage caused to an increase of etch rate. The variation of relative volume densities for F and he atoms were measured with the optical emission spectroscopy (OES). The chemical states of BLT were investigated with using X-ray photoelectron spectroscopy (XPS). XPS narrow scan analysis shows that La-fluorides remained on the etched surface. The presence of maximum etch rate at CF$_4$(20%)/Ar(80%) may be explained by the concurrence of two etching mechanisms such as physical sputtering and chemical reaction. The roles of he ion bombardment include destruction of metal (Bi, La, Ti)-O bonds as well as assistant for chemical reaction of metals with fluorine atoms.oms.