• Carbon letters
• /
• v.4 no.3
• /
• pp.140-145
• /
• 2003

Antibacterial behaviors of PAN-based activated carbon fibers (ACFs) containing silver metal were investigated. The effects of surface and pore structures of the ACFs were studied by $N_2$/77 K adsorption and D-R plot as a function of silver loading content. The antibacterial activities were investigated by a dilution test against Staphylococcus aureus (S. aureus; gram positive) and Klebsiella pnemoniae (K. pnumoniae; gram negative). As experimental results, the ACFs showed some decreases in specific surface areas, micropore volumes, and total pore volume with an increase of silver content. However, the antibacterial activities of the ACFs were strongly increased against S. aureus as well as K. pnumoniae, which could be attributed to the presence of antibacterial metal in the ACFs system.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.310-317
• /
• 2003

Two-component ceramic (alumina-zirconia) composites were fabricated by a soft-solution process in which polyethylene glycol (PEG) was used as a polymeric carrier. Metal salts and PEG were dissolved in ethyl alcohol without any precipitation in 1:1 volume ratio of alumina and zirconia. In the non-aqueous system, the flammable solvent made explosive, exothermic reaction during drying process. The reaction resulted in formation of volume expanded, porous precursor powders by a vigorous decomposition of organic components in the precursor sol. The PEG content affected the grain size of sintered composites as well as the morphology of precursor powders. The difference of microstructure in sintered composite was attribute to the solubility and homogeneity of metal cations in precursor sol. At the optimum amount of the PEG polymer, the metal ions were dispersed effectively in solution and a homogeneous polymeric network was formed. It made less agglomerated particles in the precursor sol and affected on uniform grain size in sintered composite.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.28-33
• /
• 2010

Ni alloy steel is able to use during long time because of good acid and corrosion resistance. So, it's research has focused on developing the alternative alloy which is economically feasible. Recently, consumption of Kovar steel is gradually increased in field of the jet engine and the gas turbine because of its low thermal expansive characteristics. The specimens of Kovar steel(29%Ni-17%Co) contain 0.00%C, 0.03%C, 0.06%C, 0.10%C and 0.20%C, respectively. Ingots are manufactured by VIM(vacuum induction melting furnace) and then specimens are made by automatic hot rolling after heat treatment. Strength of Kovar steel according to carbon contents is estimated by hardness, tensile and impact test. Hardness of the 0.20%C specimen is more improved approximately 14.4% than one of base metal. Its strength increases 32.4% of a base metal, and its impact energy is also enhance 11.5%.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.995-1001
• /
• 2014

When relations improve between North and South Korea, there will be demand for North Korean edible plants because of the low labor cost and similar environmental conditions. However, there is no reliable information about trace elements, metals, and metalloids in edible plants from North Korea. Selenium (Se) and germanium (Ge) have positive effects on basic human health and are therapeutical in diverse illnesses. Metal and metalloid (Cd, Pb) poisoning, on the other hand, can cause many health problems. Plants collected from North Korea had higher selenium content than those from South Korea. Although none of the collected species exceeded the permissible levels of cadmium and lead, their content in plants was significantly higher in North Korea than in South Korea. The high metal contents in plants collected from North Korea may be associated with the soil physicochemical properties as well as the accumulated amounts of elements in the soil.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.196-203
• /
• 2008

Metal-carbon/$TiO_2$ composite photocatalysts were thermally synthesized through the mixing of anatase to metal(Cu, Zn) containing phenol resin in an ethanol solvent coagulation method. The BET surface area increases, with the increase depending on the amount of metal salt used. From SEM images, metal components and carbon derived from phenol resin that contains metal was homogeneously distributed to composite particles with porosity. XRD patterns revealed that metal and titanium dioxide phase can be identified for metal-carbon/$TiO_2$ composites, however, the diffraction peaks of carbon were not observed due to the low carbon content on the $TiO_2$ surfaces and due to the low crystallinity of the amorphous carbon. The results of a chemical elemental analysis of the metal-carbon/$TiO_2$ composites showed that most of the spectra for these samples gave stronger peaks for C, O, treated metal components and Ti metal compared to that of any other elements. According to photocatalytic results, the MB degradation can be attributed to the three types of synergetic effect: photocatalysis, adsorptivity and electron transfer, according to the light absorption between the supporter $TiO_2$, metal species, and carbon layers.

• Environmental Analysis Health and Toxicology
• /
• v.4 no.1_2
• /
• pp.35-45
• /
• 1989

Studies on the heavy metal content of ginkgo leaves growing in all around Seoul. This study was carried out to investigate the concentration of heavy metals and soluble sulfur in ginkgo leaves. These leaves are found growing in park, residential, commercial and industrial areas all around Seoul. These analyzed the quantity of Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn, Hg and soluble surfur in separate samples of washed and unwashed leaves. The results were as follows: 1. This order of heavey metal concentration was found in Seoul area,: Fe＞Mn＞Zn＞Ni＞Pb＞Cu＞Co＞Cd＞Hg. 2. Pb concentration was higher in the commercial area than in the other areas, and it concentration in washed leaves was higher 96～100% and unwashed leaves 85～170%. 3. In the residential area Ni concentration was significantly higer where about seven times more Ni as found on the top part of the leaves. 4. Water soluble surfur was higest in the inudstrial area, but the percentage on top of the leaves was only 0.04～0.05% simillar with other area. 5. Fe, Zn and Ni were almost positively correlated to each component but negatively correlated between Mn and souble sulfer. All of content except Mn and Ni were significance between each area in washed and unwashed leaves.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.299-307
• /
• 2009

The purposes of this study ate to evaluate sensibility performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. The sensibility performances such as sensory, touch preference and buying preference for memory fabrics of the metallic Jacquard fabrics were evaluated, and mechanical properties were measured by KES-FB system. The correlation between the mechanical properties and the sensibility performance were analyzed. As the metal fiber content increased, the sensory evaluation value of lustered, wrinkly, sandy, rustle and stiff increased, the sensory evaluation value of slippery and damp decreased. As the metal fiber content increased, the touch preference decreased and the buying preference increased. The touch preference had negative correlation with the metal fiber content, but the buying preference had positive correlation with it.

• Journal of Welding and Joining
• /
• v.32 no.2
• /
• pp.18-21
• /
• 2014

Cold cracking of weldment is one of the most serious welding problems. A sufficient quantity of diffusible hydrogen, a residual stress, and a sensitive microstructure are the causes of cold cracking. Removal of any one of these factors can be used to prevent cold cracking. Application of flux cored arc welding process is increasing due to high productivity and easiness of welding. In addition, to prevent cold cracking in the HAZ or weldment, preheat temperature and interpass temperature have to be controlled. In this study, the effect of preheat temperature on the levels of diffusible hydrogen in the weld metal deposited using flux cored wire was examined. The levels of preheat temperature of base metal specimen were ambient temperature, 50, 100 and $150^{\circ}C$ respectively. The result showed that the increase of preheat temperature was a linear relationship with reduction of diffusible hydrogen content in weldment.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.159-163
• /
• 2002

So far, many kinds of researches on the chip components and MCM-C RF module especially on the 3-dimensional ceramic module using embedded passives have been performed. LTCC system has many kinds of advantages, like low loss, low cost of process, stability of process etc..The electrical behaviors of components are affected by that of the material systems including dielectrics and conductors. In this study, many kinds of conductor pastes in the variation with metal content and grain size are fabricated and their effect on the characteristics of stripline resonator are examined upto 6 ㎓.

• Journal of Environmental Science International
• /
• v.14 no.6
• /
• pp.605-611
• /
• 2005

The aim of this study was to analyze the local distribution of the heavy metal concentration in Daegu and Ulsan which were divided into the residual areas, the traffic dense areas and the industrial areas. The Inductively Coupled Plasma(ICP) was used to analyze heavy metals, such as As, Cr, Hg, Zn, Cd, Pb, Cu and minor metals, such as Fe, Si, Mg, Ca, AI, Na, K. The results of this analysis showed that the content of heavy metals which was classified by districts in Daegu and Ulsan was the highest in the industrial areas followed by the traffic dense areas and the residual areas. Compared to the level of heavy metals of national and local soil survey network in 2003, contamination of heavy metals in Daegu was lower than national average. However, the content of Cd, As, Zn in Ulsan was respectively 13.38 times, 472 times and 2.65 times higher than national average contamination. In addition, compared to the soil pollution level of the environmental protection law, contamination of all areas in Daegu was lower. But the content of As at the industrial areas in Ulsan was 10.71 times higher than standard of soil pollution and 4.28 times higher than standard of measures against soil contamination.