• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.117-124
• /
• 2011

The possibility of using the properties of an ultrasonic wave as a means for monitoring the moisture content of a board during drying was investigated. The ultrasonic wave signals are influenced by moisture content and other factors such as temperature, moisture gradient and coupling area. The effect of temperature was examined by measuring the transit times, amplitudes and velocities of ultrasonic waves transmitted through air, a metal bar and a board at various temperatures. The effect of a moisture gradient was studied using a model specimen composing five wood pieces of various moisture contents. The velocity and amplitude of the ultrasonic waves transmitted through air increase with temperature, while those through a metal bar and a board decrease. It was confirmed that the temperature effect is partially attributed to the change of transducer's properties. The effect of a moisture gradient on the velocity of an ultrasonic wave varies with the average moisture content of a board. As the dimension of the end face of a board increases the velocity of an ultrasonic wave increases and low frequency components more dominates than high frequency components. The transit times of ultrasonic waves transmitted through a board during kiln drying reflect the temperature steps in the drying schedule and the transducer temperatures.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.135-143
• /
• 1998

In order to study the general characteristics of reservoir and stream sediments, various analysis tests were conducted. Water contents and ignition loss were measured to know the primary sediment characteristics. The COD, total phosphorus and nitrogen were contained for the determination of organic substance content. For the purpose of establishing the contamination degree of heavy metals, some heavy metal contents were investigated. In heavy metal contents, reservoir sediments showed somewhat higer value than stream sediments. As a result, the reservoir sediment content of all analysis items were higher than stream sediment.

• Journal of Powder Materials
• /
• v.9 no.4
• /
• pp.227-234
• /
• 2002

For the austenitic stainless steel (304L) manufactured by metal injection molding(MIM), the effects of copper content and sintering temperature on the mechanical properties, antibacterial activities, corrosion resistance, and electric resistances were investigated. The specimens were prepared by injection molding of the premixed powders of water-atomized 304 L and Cu with poly-acetyl binders. The green compacts were prepared with various copper contents from 0 to 10 wt.% Cu, which were debound thermally at 873 K for 7.2 ks in $N_2$gas atmosphere and subsequently sintered at various temperatures from 1323 K to 1623 K for 7.2 ks in Ar gas atmosphere. The relative density and tensile strength of the sintered compacts showed the minimum values at 5 and 8 wt.% Cu, respectively. Both the relative density and the tensile strength of the specimen with 10 wt.% Cu sintered at 1373 K showed the highest values, higher than those of copper-free specimen. Antibacterial activities investigated by the plastic film contact printing method for bacilli and the quantitative analysis of copper ion dissolved in water increased as the increase of the copper content to stainless steels. It was also verified by the measurement of pitting potential that the copper addition in 304 L could improve the corrosion resistance. Furthermore the electric conductivity increased with the increase of copper content.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.1-8
• /
• 2005

Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue life of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue life on base metal specimens or solution annealed specimens showing that the fatigue lift was almost the same. The maximum stresses of X, Y, and Z axis direction showed about $2.12{\times}10^2MPa,\;4.40{\times}10^2MPa\;and\;1.32{\times}10^2MPa$ respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about $3.5{\sim}10%$ than that of the experiment result showing that the longer fatigue crack length the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.73-78
• /
• 2011

Weldability, especially HAZ cold cracking, weld metal solidification cracking, and HAZ liquation cracking susceptibilities, of ASTM A356 CA6NM martensitic stainless steel casting was investigated and compared with that of 9-12% Cr ferritic steel castings. Irrespective of the Cr and Ni content in the castings, the HAZ maximum hardness increased with an increase of carbon content. CA6NM steel, which has the lowest carbon content, had the lowest HAZ hardness and showed no cold cracking in y-slit cracking tests. CA6NM steel, meanwhile, showed the largest weld metal solidification cracking susceptibility in varestraint tests because of its higher amount of impurity elements, phosphorus, and sulfur. All castings investigated had good high temperature ductility in hot ductility tests and showed little difference in liquation cracking susceptibility.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.337-344
• /
• 2012

Purpose: This study examined the corrosion level by alloy type and pH, and used the corrosion levels as the dental health data. The study utilized one Ni-Cr alloy for the full and removable partial denture metal frameworks and two Ni-Cr alloys for porcelain-fused-to-metal crown, among the non-beryllium dental casting non-precious Ni-Cr alloys. Methods: The alloy specimens were manufactured in $10cm^2$ and stored in the corrosive solution(pH 2.2-4.4) in the electrical water bath($37^{\circ}C$) for seven days. Afterwards, the metal ions were quantitatively analyzed using the ICP. Results: Of the three metal alloys, Bellabond-Plus$^{(R)}$alloy and SOLIBOND N$^{(R)}$alloy, with 22% or higher chrome chemical contents, had higher corrosion resistance than Jdium-100$^{(R)}$alloy with 20% chrome chemical content. In all three alloys, the corrosion of Ni was highest, and metal ion corrosion was higher in the pH 2.2 corrosive solution. Conclusion: Although Ni-Cr alloy was not very corrosive, a Ni-allergic patient should not have Ni-Cr alloy prosthesis. The Ni-Cr alloy for porcelain-fused-to-metal crown should be designed for the dental porcelain to cover the whole crown.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.245-251
• /
• 2003

This study was cnducted ton investigate the effect of soil conditioner such as dolomite, slkudge and organic manure on changes of soil chemical properties of abandoned zinc mine area. Growth responses of Chrysanthemum azwadskii and Caryopteris incana (Tunb) Miq affected by the appication were also determined. In thejsoil of abandoned zinz mine area, total heavy metal contents espectially Cd, Cu, Pb and Zn were high and organic matter contents was low. Application of sludge for phytoremediation resulted in higher soil organic content that other treatments tested. Heavy metal concentrations after application of soil conditioners were not different among treatments. The growth of C. zawadskii and C. incana (Tunb) Miq were significantly higher in sludge treatment than those in other treatments The cholrophyll content, chlorophyll flouorescence, protein content, photosynthetic rate and transpiration were high in sludge treatment. The heavy metal contents of C. zawadskii were the lowest in sludge treatment while those of C. incana (Tunb) Miq was the highest in sludge treatment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.152-160
• /
• 1997

A diesel engine oil which was formulated and a commercial diesel engine oil (API CG4) made from same base oil were tested by car and analyzed of their physical, chemical and mechanical properties. The tested oil to be analyzed were sampled from engine every 1000 km until 8000 km and determined the kinematic viscosity, TAN, TBN, metal content in oil, additive depletion, antiwear property and IR analysis. From the study, both the tested oils were almost same properties for the change of TAN and TBN, but the change of kinematic viscosity of formulated oil was slightly higher than that of commercial oil. But the concentration of metal in the formulated oil, especially iron, were increased much less during test. The iron content of the commercial oil was increase rapidly from 7000 km while the formulated oil was still low. These results were conformed by the antiwear test by 4-ball wear test machine for the samples. Also for the commercial oil, the depletion factor of the Zn-DTP which was added as an antiwear property was not change any more after 7000 km. But the formulated oil was change continuously until 8000 km, which mean that the ability of wear protection of the sliding parts exists for the formulated oil. With the results which were analyzed of the properties of oils by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil can use more than 8000 km without severe wear of the sliding parts in the diesel engine.

• Journal of Environmental Health Sciences
• /
• v.8 no.1
• /
• pp.31-43
• /
• 1982

Seventy-seven Mugil cephalus of spinal deformation, living in Hanam, Nogsan, and Myeongji area, the downstreams of the Nagdong River, were collected in order to determine their forms and the levels of heavy metal contamination between March and October, 1981. The specimens were examined by X-ray and content of cadmium, lead, copper, and zinc by atomic absorption spectrophotometer. The results were summarized as follows: 1. The rate of appearance of deformational fish to the total Mugil cephflus were 4.3% (13 fish), 5.7% (17 fish), relatively high in May and June (dry season). Meanwhile during March and October they were low by 1.0% (3 fish), 2.0% (6 fish). As far as the research areas are concerned, they appeared in larger numbers in downstreams than in upper streams Myeongji (39), Nogsan (25), and Hanam (13). 2. Concerning with fractured parts of vertebraes,86 percent (66 out of 77) had their caudal regions fractured and 72 percent (55) their first to seventh caudal regions fractured. 3. The average levels of cadmium, lead, copper, zinc detected from flesh were 0.26ppm, 2.06ppm, 6.35ppm, 0.85ppm on the other hand, they were 0.22ppm, 1.84ppm, 5.03ppm, 0.93ppm in normal fish. 4. The average levels of cadmium, lead, copper, zinc measured in the bones were 0.39ppm, 2.55ppm, 8.97ppm, 2.73ppm. Meanwhile, from normal fish they were 0.33ppm, 2.25ppm, 7.24ppm, 2.42ppm. 5. Compared with regional heavy metal contamination such as cadium, lead, zinc, Myeongji area had higher contamination content than Nogsan area Nogsan area than Hanam area. 6. Compared with heavy metal contamination level in their tissues, cadmium was highly found in bones Lead and copper were highly detected in viscera. Particularly in skeleton cadmium was 560 times, zinc 160 times in proportion to those in the downstreams of the Nagdong River.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.663-673
• /
• 2017

Heavy metal(loid) contamination of rice is the main issue in abandoned metal mine area with regard to food safety. A field study was conducted in mine area to see if soil amendments treatment including calcium superphosphate, sulfur, steel slag and S-containing fertilizer could reduce As and/or Cd content in rice grain and increase the growth of rice. The As content in brown rice reduced to 60% compared to the control only in $7.0Mg\;ha^{-1}$ of steel slag treatment. Cd reduction in rice was thought to be not the effect of amendments but the result from the difference in growth and development of rice plant and this could be ascribed to low soil Cd availability to rice plant. Compared with control, increased rice yield of cultivar Hwanggeumnuri was 1.3~2.2 and $1.5Mg\;ha^{-1}$ in calcium super phosphate and S-containing fertilizer treatment, respectively and the trend was also observed in cultivar Ungwang. However, steel slag treatment reduced the Ungwang yield by $0.4{\sim}0.9Mg\;ha^{-1}$. Future work will be needed to establish the agricultural measure with which secure the safety and yield of rice simultaneously.