• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.220-226
• /
• 2007

For the analysis of hazard factors and the development of GAP (Good Agricultural Practices) Ginseng, 10 ginseng cultural farms wished certified GAP were selected at Geumsan-gun area, a representative site of ginseng cultivation in Korea. In order to verify the safety of GAP ginseng, possible contamination of pesticide and heavy metal residues, and microbial hazard were analyzed. Soil and water around ginseng cultivation field, and ginseng were investigated. Eighty-one pesticides including carbendazim were used as typical pesticide against plant pathogens and insect pests of ginseng plant and general crops. There was no excess the maximum residue limit (MRL) in residue figure of the soil. Including the residue figure of the arsenic (0.81 ml/kg) and 7 other heavy metals was also suitable to cultivate the ginseng plant. The irrigation water and dilution water for pesticide application were also safety level for GAP. Fresh ginsengs from the farms were sampled and investigated pesticide residues and contaminations of bacteria. Among 23 pesticides tested, we didn't detect any kinds of pesticide residues, but tolclofos-methyl was frequently found in the other ginseng field. On the investigation of microorganism hazards, 2 gram negative bacteria and 1 gram positive bacterium were found in the fresh ginseng. Number of total bacteria was $1.5{\times}10^3$ cfu/ml, which was less than the other agriculture products. At these results, 10 selected ginseng farms were good cultural places for GAP ginseng production and the ginseng cultured from Geumsan-gun area were a good safe far human.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.670-677
• /
• 2010

There are many surface protection methods for numerous steel structures being used under severely corrosive environment, one of them, metallizing(thermal spray) is a available protection method which is comparatively and recently developed for surrface protection of various steel structures. However coating film obtained by spraying is to be needed increasingly more good corrosion resistance due to accelerating of environmental contamination. In this study, coating films(DFT:$200{\mu}m$) are performed with arc spray by wire metal and their types of films are pure zinc, pure aluminum, alloy film(Al:Zn=85:15) and alloy film(Al:Zn=95:5). And corrosion resistance of their films was investigated with electrochemical methods in seawater solution. Pure aluminum film showed a relatively somewhat good corrosion resistance compared to among those of other films and alloy films also showed a good corrosion resistance compared to pure zinc film. Especially it was observed that pure aluminum film showed a comparatively good corrosion resistance than that of alloy film named as galvarium spray(Al:Zn=85:15) in seawater solution. Morphology of corroded surface of pure zinc film appeared the pattern like intergranlar corrosion, however films of pure aluminum and alloy metal showed a general corrosion pattern.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.2
• /
• pp.87-96
• /
• 2016

BACKGROUND: The objective of this study is to evaluate the soil quality to cultivate crops in urban garden.METHODS AND RESULTS: During the period of six month from March to August 2015, measured eight heavy metals, seven Organic items and Fluorine on seventeen urban sites and thirty-one suburban sites in Gwangju city.METHODS AND RESULTS: The average concentration and range of heavy metal in soil are 0.15 mg/kg(ND-0.6) for Cd, 14.9 mg/kg(1.5-33.3) for Cu, 4.4 mg/kg(0.4-71.8) for As, 0.05 mg/kg(ND-1.366) for Hg, 24.7 mg/kg(13.1-62.7) for Pb, 102.5 mg/kg(49.1-276.4) for Zn and 9.2 mg/kg(ND-90.1) for Ni but Cr⁶⁺ is not detected. The average value and range of soil fertility items are 253.5mg/kg(76.6-1766.0) for fluorine, 6.4(4.8-7.7) for pH, 20.3 g/kg(5.0-44.0) for orangic matters, 562.7 mg/kg (28.0-1672.0) for available phosphate, 0.6 cmol⁺/kg (0.1-2.3) for K, 9.7 cmol⁺/kg (2.7-22.0) for Ca, 3.0 cmol⁺/kg (0.9-7.4) for Mg, 1.0 ds/m(0.2-2.9) for conductivity. The concentration of Hg in Suburban area is 0.005 mg/kg lower than 0.134 mg/kg in urban area. Also, the concentration of As, Cd, Ni and Zn is lower than urban area as 32%, 37%, 51%, 71% respectively.CONCLUSION: According to SPI index of soil contamination, 39 sites are first degree and 8 sites are second degree and 1 site(41th) is fourth degree. Pb and Cd are not detected and As is detected tiny amounts in plants grown polluted soil, so heavy metals have not moved to plants.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.237-244
• /
• 2013

The engine oil is used for lubrication of various internal combustion engines. Recently, the vehicle and engine oil manufacture usually guarantee for oil change over 15000~20000 km mileage, but the most of driver usually change engine oil every 5000 km driving in korea. It can cause to raise environmental contamination by used engine oil and increase the cost of driving by frequently oil change. In this study, we investigate the various physical properties such as flash point, pour point, kinematic viscosity, cold cranking simulator characteristics, total acid number, four-ball test and concentration of metal component for fresh engine oil and used engine oil after real vehicle driving (5000 km, 10000 km). The result showed that the total acid number, wear scar diameter by four-ball test, Fe and Cu had increased than fresh engine oil, but 2 kind of used oil (5000 km and 10000km) had similar physical values and concentration of metal component.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.236-241
• /
• 2016

This study conducted a screening-level ecological risk assessment for heavy metals in dredged sediment for recycling in terrestrial environment. Toxicological information of six heavy metals (i.e., Cu, Zn, Cd, Pb, Cr, and Ni) was collected from ECOTOX of US Environmental Protection Agency, and screened and qualified for the use in the screening-level ecological risk assessment. According to the number of terrestrial ecological receptors for which toxicological information is available, PNEC (Predicted No Effect Concentration) of each heavy metal was derived using either stochastic approach (for Cu, Zn, and Cd), or deterministic approach (for Pb, Cr, and Ni). Hazard quotients of the six heavy metals were derived for a field-collected dredged sediment using the PNEC derived and the PEC (Predicted Environmental Concentration) determined for the dredged sediment. The HQs of Cu, Zn, Cr, Pb and Ni were higher than unity indicating a possibility of ecological risk of the five heavy metals when the dredged sediment is applied in terrestrial environment. Accordingly, remediation processes or a higher-level ecological risk assessment would be needed for the recycling of the material.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.424-431
• /
• 1996

This study was carried out to provide information for establishing counter measures of soil pollution through analysis of Cd. Cu, Pb, and Zn in paddy soils and brown rice. Cadmium, Cu, Pb, and Zn contents in soils were analyzed and distribution maps for these heavy metals were prepared. Heavy metal contents in brown rice were also measured. Average contents of Cd, Cu, Pb, and Zn in surface paddy soils extracted with 0.1 N HCl were 7.4, 35.8, 98.9, and $118.8mg\;kg^{-1}$, respectively. These were 9 times (Cu) to 50 times (Cd) higher than the background level of heavy metals in unpolluted paddy soils in Korea. The contents of Pb and Zn were lower than those measured in 1980, whereas Cd content did not decrease. The levels of heavy metal contamination in paddy soils may not affect growth or yield of rice plant, however, Cd contents indicated a level of serious concern to humans. The average contents of Cd, Cu, Pb, and Zn in brown rice were 0.38, 2.38, 1.31 and $22.31mg\;kg^{-1}$, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2009

The metals such as Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn, etc are present at very low concentration in seawater and are classified as so-called trace metals. Whiles some of them are used in metabolism of living organism as a micronutrient, they may show toxic effects on organisms in case of a limited threshold concentration of them Plenty of studies on trace metals have been performed bemuse trace metals have a persistent influence and an adverse effect on marine environment and ecosystem. For long years, when the concentration of trace metals in natural waters such as seawater and fresh water are measured with high precision and accuracy, some systematic errors have been recognized to be present in measurements. Since 1975 in US and European countries, the measured concentration of trace metals in seawater have been found to be lower by factors of 10-1,000 than the previous data of trace metals measurements and the vertical profiles of the measurements have been shown to reflect well-known biological, physical and geochemical processes. These results are attributed to great advances in analytical instrumentation and methodology for trace metals measurements. Precautions against the contamination of samples are required to be taken in the process of sampling, storage, and analysis of samples. However, in Korea, erroneous data of trace metals with regard to ocean and marine environment related survey and investigations are reported The lock of exact understanding and information regarding precautions in sampling, storage and analysis of samples lead to the deterioration of data quality, especially in the analysis of trace metals. The major procedures to obtain the accurate data of trace metals in natural waters are introduced for applying to the study and assessment of marine environments.

• Journal of Food Hygiene and Safety
• /
• v.14 no.3
• /
• pp.277-281
• /
• 1999

Chemical composition of imported table salts from China (sun dried), Thailand (sun dried) and Australia (rock salt) were compared the mineral content and heavv metal contamination with Korean sun dried salt. Kimchies prepared by those salts were analyzed the quality by pH, acidity and sensory evaluation. Chemical compositions were as follows : moisturefrom 1.7% (Australia) to 8.7% (Korea), sodium chloride-from 86.7% (China, summer) to 97% (Australia), insoluble matter in water-from 0.02% (Australia) to 0.18 (China), and sulfate ionfrom 0.03% (Australia) to 1.65% (China, summer). Judging by Korean Standard(KS) of salt, salt from Australia and Thailand belong to 1st grade, Korean and Chinese (winter) to 2nd grade, and China (summer) were out of 3rd grade. Ca and Mg content of the salts tested were 0.022% (Australia) to 0.246 (China, winter), 0.036% (Australia) to 0.841% (China, summer) respectively and Pb was 1.23 ppm(China, summer)~0.61ppm(Korea) which is within the Korean regulation. The other heavy metals, Pb, Cd, As and Hg were not detected in all salts tested. The quality of Kimchi prepared by those salts were significantly no difference with Korean sun dried salt.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.885-893
• /
• 2014

This research reports the enhanced Electrokinetic (EK) with $H_2O_2$ and sodium dodecyl surfate (SDS), which are commonly used in Fenton oxidation and soil flushing method, in order to remediate soil contaminated with heavy metals and Total Petroleum Hydrocarbons (TPH) simultaneously. In addition, influences of property of soil and concentration of chemical solution were investigated through experiments of different types of soils and varying concentration of chemical reagents. The results indicated, in the experiments using artificially contaminated soil, the highest removal efficiency of heavy metals using 10% $H_2O_2$ and 20mM SDS as electrolytes. However, in the experiments using Yong-San soils (study area), remediation efficiency of heavy metals was decreased because high acid buffering capacity. Through experiment of 20% $H_2O_2$ and 40mM SDS, increased electric current influences the remediation of heavy metals due to decrease in the soil pH. In the experiments of Yong-San soils, the remediation efficiency of TPH was decreased compared with artificially spiked soils because high acid buffering capacity and organic carbon contents. Furthermore, the scavenger effect of SDS influenced TPH oxidation efficiency under the conditions of injected 40mM SDS in the soils. Therefore, the property of soil and concentration of chemical reagents cause the electroosmotic flow, soil pH, remediation efficiency of heavy metals and TPH.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.500-505
• /
• 2004

While more attention has been paid in recent years to urban point source pollution control, no considerable measures have been taken to control urban non-point source pollution. Contaminants from non-point sources deposited on urban impermeable surfaces such as road and highway are easily released to the public waters by rainfall, leading to the deterioration in water quality in urban area. The present study investigated a system using filter media to reduce the level of contamination in urban road runoff. Three different media, designated as J-P (polypropylene, blowing type), B-P (polypropylene, fiber type), and P-F (Polyvinyl alcohol, cube and sheet type) were evaluated on the basis of pollutant removal efficiency as well as hydraulic property. Experiments were peformed using a 1/4-scale treatment unit at various pollutant roading and rainfall intensity with real rainwater runoff collected from road surfaces. The results at different rainfall intensities shows that the medium J-P is superior to the other media for water permeability. J-P was not blocked at 10 mm/hr rainfall and its permeability was stable. On the other hand, B-P and P-F resulted in substantial overflow ratio even at I mm/hr rainfall intensity. Comparing treatment efficiencies for suspended solids, all media showed similar removal ranged from 91 % to 95%. However, J-P seems to be better than the other media considering its higher water permeability. J-P and P-F, both hydrophobic, yielded over 76% of heavy metal removal. But, the hydrophilic media B-P showed much smaller removal ranging from 26% to 47%. This indicates that J-P and P-F are beneficial to remove heavy metal due to their hydrophobic property. The treatment efficiencies over PAHs (poly aromatic hydrocarbons) showed the similar removal efficiency ranging from 66% to 97% for all three media.