• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2018

In this study, we calculated the redistribution of vacancy concentration in metal specimens induced by stress-induced diffusion at a high temperature. To deduce the governing equation, we associated the unit volume change equation of strains with a differential equation of vacancy concentration as a function of stress using the stress-strain relationship. In this governing equation, we considered stress as the only chemical potential parameter to stay in the scope of this study, which provided the vacancy concentration equation as of stress gradient in metals. The equation was then mathematically delineated to derive a analytical solution for a transient, one-dimensional diffusion case. With the help of Korhonen's approximation and the boundary conditions, we successfully deduced a general solution from the governing equation. To visualize the feasibility of our solutions, we applied the solution to two different stress-induced cases - a rod with fixed concentrated stresses at both ends and a rod with varying concentrated stresses at both ends. Although it is necessary to legitimatized the model in the future for improvement, our results showed that the model can be used to interpret the location of structural defects, the formation of vacancy, and furthermore the high temperature behavior of metals.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.1-8
• /
• 2000

The objective of this study was to identify the sources and to estimate the source contributions to the atmospheric TSP(total suspended particulate matter) and PM-10(particulate matter with aerodynamic diameters less than 10$\mu\textrm{m}$) concentration in Taegu area. A total of 84 samples was collected during the January to December 1999. TSP and PM-10 were collected on filters by portable air sampler, and heavy metals in TSP and PM-배 were analyzed by ICO(Inductively Coupled Plasma Spectrometery) after preliminary treatment. The results were follow as : First, annual average of TSP and PM-10 concentration was 123 and 69$\mu\textrm{g}$/㎥ respectively. The concentration of TSP and PM-10 were highest in winter season compared to other seasons. Second, the concentration of Al, Fe, Mn were higher in TSP than in PM-10, indicating that these heavy metals are generally associate with natural contributions. Third, metal combinations showed that a high correlation among concentrations of heavy metals were follows: As Al, Fe and Mn in TSP ; Ni, Cr, Cd and Pb in PM-10. Finally, Statistical analysis was performed using Principal Components Analysis(PCA) in order to find possible sources of the pollutants. The factor analysis was permitted to identify four major sources(soil/road dust resuspension, waste incineration, furl combustion, vehicular emission) in each fraction. These source accounted for at least 83, 85% of variance of TSP and PM-10 concentration in Taegu area.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.4
• /
• pp.24-29
• /
• 2001

GaN films were grown for various Mg doping concentrations in metal-organic chemical vapor deposition. Below the Mg concentration of 10$^{19}$ ㎤, the thermally annealed sample shows the compensated phase to n-type GaN in Hall measurement. In the MB concentration of 4$\times$10$^{19}$ ㎤ corresponding to the hole carrier concentration of 2.6$\times$1$^{19}$ ㎤ there exists a photoluminescence center of the donor and the acceptor pair transition of the 3.28-eV band. This center is correlated with the defects for a shallow donor of the $V_{Ga}$ and for an acceptor of $Mg_{Ga}$ . The acceptor level shows the binding energy of 0.2-0.25 eV, which was observed by the photon energy of the photocurrent signal of 3.02-3.31 eV. Above the Mg concentration of 4$\times$10$^{19}$ ㎤, both the Mg doping level and Mg concentration were saturated and there Is a photoluminescence center of a deep donor and an acceptor pair transition of the 2.76-eV blue band.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.441-449
• /
• 2015

Studies on the flocculation of algae using various metal ions were carried out by measurements of optical density(OD) and zeta potential. Cyanobacteria were used as algaes. Flocculation efficiencies of cyanobacteria by an addition of metal ions were determined from OD values, and the effect of metal ions was greater in the order of $Al^{3+}$>$La^{3+}$>$Ho^{3+}$>$Fe^{2+}$>$Ca^{2+}$. Especially for trivalent metal ions, percentages of metal removed from cyanobacteria solutions on flocculation were measured, showing the same order as in flocculation efficiencies. Zeta potentials of cyanobacteria alone were measured with increasing the concentration, found to be all negative voltages, and were increased with increasing the concentration. The effect of pH on zeta potential of cyanobacteria solution was investigated. Below pH 5.5, the zeta potentials were steeply decreased with increasing pH, whereas in the range of $5.5{\leq}pH{\leq}10$ they were almost constant ($-46{\pm}1mV$) even with increasing pH. At a constant concentration of cyanobacteria ($A_{730}=0.25$), an increase in concentration of metal ions caused an increase in zeta potential of cyanobacteria solution, showing that the effect was greater in the order of $Al^{3+}$>$Ho^{3+}$>$La^{3+}{\gg}Mg^{2+}{\geq}Ca^{2+}{\gg}K^+$. At a constant metal concentration, zeta potentials were measured with increasing cyanobacteria concentration, showing that zeta potentials for $K^+$, $Mg^{2+}$ and $Ca^{2+}$ ions were negligibly changed, whereas those of $Ho^{3+}$ and $La^{3+}$ ions were decreased. Moreover, the effect of $Ho^{3+}$ ion on decreasing zeta potential was smaller than that of $La^{3+}$ ion. $Al^{3+}$ ions showed quite a different behavior that with increasing cyanobacteria concentration the zeta potentials increased and decreased thereafter. Hydrolysis of $Al^{3+}$ ions caused a difficulty to investigate coagulation or flocculation of cyanobacteria by measurement of zeta potential.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2570-2575
• /
• 2021

The exchange behaviors of hydrogen isotopes between protonated lithium metal compounds and deuterated water or tritiated water were investigated. The various protonated lithium metal compounds were prepared by acid treatment of lithium metal compounds with different crystal structures and metal compositions. The protonated lithium metal compounds could more effectively reduce the deuterium concentration in water compared with the corresponding pristine lithium metal compounds. The H⁺ in the protonated lithium metal compounds was speculated to be more readily exchangeable with hydrons in the aqueous solution compared with Li⁺ in the pristine lithium metal compounds, and the exchanged heavier isotopes were speculated to be more stably retained in the crystal structure compared with the light protons. When the tritiated water (157.7 kBq/kg) was reacted with the protonated lithium metal compounds, the protonated lithium manganese nickel cobalt oxide was found to adsorb and retain twice as much tritium (163.9 Bq/g) as the protonated lithium manganese oxide (69.9 Bq/g) and the protonated lithium cobalt oxide (75.1 Bq/g) in the equilibrium state.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.289-292
• /
• 2003

Laboratory tests were performed to investigate the dielectric property of saturated sands contaminated by heavy metals solution at low frequency. Differences of contamination and the real part of dielectric constant depend on heavy metal concentration was measured at low frequency, 100KHz below. The optimal frequency to develop the detection potentials of monitoring was 1KHz, 10KHz, 100KHz. At this frequency, Heavy metal contamination of saturated sands contamination can be recommended by analysis of complex dielectric constant.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.33-36
• /
• 1995

Macrocyclic ligands have been studied as cation carriers in a supported liquid membrane system. Cd2+ has been transported using nitrogen substituted macrocycles as carriers and several divalent metal ions (M2+=Zn, Co, Ni, Cu, Pb, Mg, Ca, and Sr) have been transported using DBN3O2, DBN2O2and PolyNtnoen as carriers in a supported liquid membrane system. Competitive Cd2+-M2+ transport studies have also been carried out with the same system. Ligand structure, stability constant, membrane solvent and carrier concentration are also important parameters in the transport of metal ions.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.45-57
• /
• 2006

In the previous study, african marigold petals extract was valued as an excellent natural yellow dye because of its distinguished reactivity with various mordants and color fastness. In this study, we were studied on effect of absorbed metal ion by after-treatment of mordants on the color and fastness in human hair and wool fiber dyed with african marigold petals extract because the proteinic and cellulosic fiber were very well dyed. The dyed human hair showed better dyeing ability in the color fastness than wool fiber on tests of light, wash and perspiration. The absorbed metal ion concentration of mordanted human hairs were 1 or 5 times higher than wool fibers. However, excess of absorbed metal ion haven't consistent effect on K/S and surface color. Human hairs dyed using african marigold extract and mordanted with Al, Sn, Cu and Fe were showed various reddish yellow color groups and good dyeing ability on african marigold extract.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.8-13
• /
• 2001

The tiles were manufactured using a mixture of the TK material(a raw material in making tile) and Cu-Cr-Ag impregnated activated carbon(ASC Charcoal). The extraction character of heavy metals in making tile was evaluated and the manufacturing conditions of tile were studied. The heavy metals in the mixture-before and after the tile was production of tiles was successful and as a result of heavy metal analysis, the tile showed that the concentration of heavy metal after the production of tiles was lower than that of the before one. The concentration of eluted heavy metal by acidic and basic solutions was low and the quality of the produced tile was similar to the commercial one. The result of this study suggested that the waste ASC charcoal was used to produce good tiles and it also might reduce soil pollution.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.3
• /
• pp.162-167
• /
• 2016

This study was conducted in an industrial city (Bilaspur) representative of subtropical area in central India. In order to assess the metal deposition on plant, concentrations of six target metals (i.e., Fe, Mn, Pb, Cu, Cd, and Cr) in both plant leaf and dust (deposited on its surface) samples were measured from six different sites. Metal concentrations in dust samples were found on the order of Fe>Mn> Cr>Pb>Cu>Cd. In contrast, the concentration of metals in plant leaves were seen on the order of Fe>Mn>Cr>Cd>Cu>Pb. As such, Cd showed significantly high concentration in leaves relative to their corresponding dust samples. A high accumulation potential for Fe and Cd was seen from Butea monosperma, while Mn and Pb were accumulated noticeably in Pongamia pinnata and Butea monosperma. Likewise, Cr and Cu were enriched in Calotropis procera, Alstonia scholaris, and Butea monosperma. The overall results of our study suggest that the foliar uptake pattern should vary considerably by an interactive role between plant and metal types.