• 한국환경보건학회지
• /
• 제18권1호
• /
• pp.47-57
• /
• 1992

This study was performed to evaluate contamination degree of heavy metals in sediments of Han River, compared with other nation's evaluation method. The results were as follows 1. The contamination Ratio calculation method by heavy metal concentration in differnt fraction size has a limitation to apply to all of the areas of Han river because of its characteristics of sediment. As a result, this method applied to only 4 areas of Pal Dang, Wang Sook Chon, Uk Chon, and Bul Kwang Chon, and Contmination Ratio of heavy metals in those areas were relatively low of below 3. So it's considered that those areas have less contaminated from anthropogenic contaminants. 2. The Contamination Ratio calculation method by heavy metal concentration in different areasthat of upper area to be background level-has a limitation also to apply to Han river. But it is considered that this method was relatively suitable to apply, so it should be prepared evaluation standand method for them. Contamination ratio from background level as Pal Dang area were most high in An Yang Chon. So it must be prepared purification and control measure at An Yang Chon.

• 한국응용과학기술학회지
• /
• 제4권1호
• /
• pp.67-71
• /
• 1987

The transesterification reaction between diethanolamine and methyl methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The amount of reacted methyl methacrylate was measured by gas chromatography and liquid chromatography, and the reaction rate also measured from the amount of reaction products and reactants under each catalyst. The transesterification reaction was carried out in the first order with respect to the concentration of diethanolamine and methyl methacrylate, respectively. The over-all order is 2nd. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• 청정기술
• /
• 제22권3호
• /
• pp.161-167
• /
• 2016

여러 가지 금속이온이 치환된 제올라이트에서 벤젠의 촉매연소 반응에 대해 연구하였다. 사용한 제올라이트 중 Y(4.8)형 제올라이트가 가장 높은 활성을 보여주었고, Y(4.8)형 제올라이트에 치환된 금속 이온 중 구리이온이 가장 높은 활성을 보여주었다. 촉매의 활성은 산소 TPD에 의해 얻어진 흡착산소의 양에 비례하였다. Cu/Y(4.8) 촉매에서 Cu 이온의 농도가 커질수록 반응활성이 증가하였다. 벤젠의 연소반응의 전환율은 반응물 중 벤젠의 농도보다는 산소 농도의 영향을 많이 받았다. 또한, 반응물에 첨가된 물은 촉매 활성을 감소시켰다.

• 한국화재소방학회논문지
• /
• 제21권2호
• /
• pp.30-35
• /
• 2007

고분자 물질의 화재 위험성 및 화재시 인명 피해의 감소를 위한 기초자료로 제시하고자 난연제 및 금속분말의 첨가에 의한 난연성 평가를 수행하였다. 본 연구를 위하여 중량감소율,한계산소지수 및 탄화층 생성량 측정, 연기 중량 농도 및 일산화탄소 발생량 측정의 실험을 수행하였다. 금속분말과 난연제를 함유한 acrylonitrile butadiene styrene은 낮은 중량감소율을 나타내었고, 한계산소지수 및 탄화충 생성량은 증가하였으며, 연기 중량 농도 및 일산화탄소의 발생량도 감소하는 결과를 나타내었다. 또한 가장 효과적인 복합체는 tricresyl phosphate-Mo 복합체로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1711-1713
• /
• 2000

We fabricated an IMI-O polymer containing an imidazole group that could form a complex structure between the monolayer and the metal ions at the air-water interface. Also, the surface analysis and the electrical properties of metal ion complex of Langmuir-Blodgett (LB) films were investigated by using $\pi$-A isotherms. Atomoic force microscopy (AFM), current-voltage (I-V) measurements. In the $\pi$-A isotherms the molecular area was expanded with $Fe^{3+}$ concentration increase. It is considered that the expansion of molecular area is due to electrostatic repulsion between the polymer chains and hydrophobic increase of ionic strength. In the I-V characteristics, it is found that the limiting area has effects on the change of conductivity. And, the dielectric relaxation time decreased for increase of the $Fe^{3+}$ concentration.

• Journal of Welding and Joining
• /
• 제12권4호
• /
• pp.151-161
• /
• 1994

FCAW has wide application in ship fabrication, maintenance and field erection. It has many advantages over SMAW.SAW and GMAW process. In many applications, the FCAW provides highquality weld metal. This method can reduce weld defects especially porosity and spatter. But the fatigue characteristics of those deposited metal have been rarely investigated. The purpose of this study is to investigate the cyclic stress-strain behavior and fatigue tests by the constant strain control were carried out on the rounded smooth specimen with deposited metal using the metal type flux cored wire. As the results of this study for the deposited metal welded by the metal type flux cored wire, the hardening or softening characteristics under cyclic load were investigated and cyclic stress-strain curve, strain-fatigue life curve, stress-strain function and fatigue life relation which are useful to estimate the fatigue life under the stress concentration condition were obtained.

• 통합자연과학논문집
• /
• 제4권2호
• /
• pp.130-136
• /
• 2011

This study investigated the adsorption characteristics of nickel, zinc and cadmium ions from the aqueous solution onto the alginate bead. Adsorption equilibrium capacities of the heavy metal ions increased with increasing initial pH of the solution. The adsorption equilibrium isotherm of the heavy metal ions was well represented by Langmuir equation. The magnitude of adsorption capacity of the heavy metal ions onto alginate bead was the order of cadmium > zinc > nickel. Kinetic parameters were measured in a batch adsorber to analyze the adsorption rates of the heavy metal ions. The internal diffusion coefficient of the heavy metal ions in the intraparticle were determined by comparing the experimental concentration curves with those predicted from the surface diffusion model (SDM) and pore diffusion model (PDM). The internal diffusion of the heavy metal ions in the intraparticles was explained by PDM.

• 자원리싸이클링
• /
• 제29권5호
• /
• pp.73-80
• /
• 2020

폐리튬이온전지에 함유된 유가금속을 회수하기 위한 공정을 개발하기 위해 리튬(I), 망간(II), 니켈(II)을 함유한 합성 염산용액에서 구리(II)와 코발트(II)의 분리를 위한 용매추출실험을 수행했다. 본 연구에서는 Alamine 336과 Aliquat 336을 추출제로 사용했으며 염산과 추출제의 농도에 따른 금속의 추출거동을 조사했다. 염산농도가 금속의 추출거동에 큰 영향을 미치는 것이 확인되었다. 염산농도가 1 M인 조건에서는 구리(II)만 추출되었으나, 염산농도 5 M 이상의 조건에서는 구리(II)와 코발트(II)가 선택적으로 추출되고 리튬(I), 망간(II), 니켈(II)은 추출여액에 남았다. 염산농도를 조절하면 구리(II)와 코발트(II)를 선택적으로 추출하는 것이 가능하다.

• 대한기계학회논문집
• /
• 제19권12호
• /
• pp.3372-3381
• /
• 1995

An equilibrium analysis was carried out to determine principal species of heavy metals in waste incineration and their behaviors with variation of temperature, chlorine concentration, excess air ratio, and C/H ratio. The waste was assumed as a compound of hydrocarbon fuel, chlorine, and metals. Calculated results showed that the most important parameter to determine the principal species was temperature. Chlorine concentration also affected on mole fractions of the principal species. Generally principal species at high temperature were chlorides while there were some metals of which principal species were oxides. At low temperature mole fractions of the principal species increased, but at high temperature mole fractions of some metal species decreased. C/H ratio of the hydrocarbon fuel and excess air ratio had little effect on mole fractions of the metal species, compared to the temperature and chlorine concentration.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.44-48
• /
• 2002

Washing technique using solubilization and surfactant as a extractant was studied by removing contaminants from the cohesive soil contaminated with heavy metal. For this purpose, the laboratory desorption batch tests were peformed in the kaolinite contaminated with lead by using acetic acid as a solubilization and SDS as a anionic surfactant. In desorption batch tests, the effects of extractant concentration and mixing ratio were investigated and also the coupling effects of acetic acid added with surfactant were considered. Test results show that the removal efficiency of acetic acid as a extractant in the kaolinite contaminated with lead increased with increasing the concentration of acetic acid and the acetic acid was found to be more effective when adding CMC 2 or 3 of surfactant. Additionally, regardless of the initial concentration, the efficiency of lead removal from the contaminated soil increased with increasing shaking ratio.