• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.573-578
• /
• 2012

In general, most physical properties of wood/polyvinyl chloride (PVC) composites are lower than those of corresponding neat PVC resin because of poor interfacial adhesion between the hydrophilic wood flour and hydrophobic PVC. Therefore, in this study, we treated wood flour with three aminosilanes to improve wood/PVC interfacial adhesion strength, and eco-friendly wood/PVC/nanoclay composites were prepared by melt blending the aminosilane-treated wood flour, a heavy metal free PVC compound, and a type of nanoclay. The effects of treating wood flour with the aminosilanes and adding the nanoclay on the mechanical properties of the composites were investigated. Mechanical properties of the composites were investigated by universal testing machine (UTM), izod impact tester, dynamic mechanical analyzer (DMA), and thermomechanical analyzer (TMA). The tensile properties of the composites with the aminosilane-treated wood flour were considerably higher than those of the composites with neat wood flour. Furthermore, a small amount of the nanoclay improved mechanical properties of the composites. The performance of the wood/PVC composites was considerably improved by using the aminosilane-treated wood flour and the nanoclay.

• YAKHAK HOEJI
• /
• v.40 no.1
• /
• pp.102-111
• /
• 1996

LB10522 is a new parenteral broad spectrum cephalosporin with a catechol moiety at C-7 position of beta-lactam ring. This compound can utilize tonB-dependent iron transp ort system in addition to porin proteins to enter bacterial periplasmic space and access to penicillin-binding proteins (PBPs) which are the lethal targets of ${\beta}$-lactam antibiotics. The chelating activity of LB10522 to metal iron was measured by spectrophotometrically scanning the absorbance from 200 to 900nm. When $FeCl_3$ was added, optical density was increased between 450 and 800nm. LB10522 was more active against gram-negative strains in iron-depleted media than in iron-replete media. This is due to the increased expression of iron transport channels in iron-depleted condition. LB10522 showed a similar activity against E. coli DC2 (permeability mutant) and E. coli DCO (wild type strain) in both iron-depleted and iron-replete media, indicating a minimal permeaility barrier for LB10522 uptake. LB10522 had high affinities to PBP 3 and PBP 1A, 1B of E. coli. By blocking these proteins, LB10522 caused inhibition of cell division and the eventual death of cells. This result was correlated well with the morphological changes in E. coli exposed to LB10522. Although the in vitro MIC of LB10522 against P. aeruginosa 1912E mutant (tonB) was 8-times higher than that of the P. aeruginosa 1912E parent strain, LB10522 showed a similar in vivo protection efficacy against both strains in the mouse systemic infection model. This result suggested that tonB mutant, which requires a high level of iron for normal growth, might have a difficulty in surviving in their host with an iron-limited environment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.73-73
• /
• 2012

Modern technology-driven society largely relies on hybrid electric vehicles or electric vehicles for eco-friendly transportation and the use of high technology devices. Lithium rechargeable batteries are the most promising power sources because of its high energy density but still have a challenge. Graphite is the most widely used anode material in the field of lithium rechargeable batteries due to its many advantages such as good cyclic performances, and high charge/discharge efficiency in the initial cycle. However, it has an important safety issue associated with the dendritic lithium growth on the anode surface at high charging current because the conventional graphite approaches almost 0 V vs $Li/Li^+$ at the end of lithium insertion. Therefore, a fundamental solution is to use an electrochemical redox couple with higher equilibrium potentials, which suppresses lithium metal formation on the anode surface. Among the candidates, $Li_4Ti_5O_{12}$ is a very interesting intercalation compound with safe operation, high rate capability, no volume change, and excellent cycleability. But the insulating character of $Li_4Ti_5O_{12}$ has raised concerns about its electrochemical performance. The initial insulating character associated with Ti4+ in $Li_4Ti_5O_{12}$ limits the electronic transfer between particles and to the external circuit, thereby worsening its high rate performance. In order to overcome these weak points, several alternative synthetic methods are highly required. Hence, in this presentation, novel ways using a synergetic strategy based on 1D architecture and surface coating will be introduced to enhance the kinetic property of Ti-based electrode. In addition, first-principle calculation will prove its significance to design Ti-based electrode for the most optimized electrochemical performance.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.585-590
• /
• 2003

Cobalt oxygen carrier complex N,N'-ethylenebis(3-methoxysalycylideneiminato)cobalt(II), Co(3MeOsalen) was prepared at $25{\circ}C$. UV and visible absorption spectra of the complex and hydrazobenzene were studied in non-aqueous solvent methanol in the range of wavelength 200-600 nm. The oxidation of hydrazobenzene by oxygen in non-aqueous solvent is catalysed by Co(3MeOsalen). In the presence of triphenylphosphine($PPh_3$), the rate decreases in methanol. This is presumably attributable to the coordination of $PPh_3$ to the Co(3MeOsalen), resulting in the catallytically inactive compound. The initial rates of the oxidation of hydrazobenzene with the ligand triphenylphosphine were measured by the theoretical values of the rates, Rate=$k_1+k_2K_1[P]/1+K_1[P]+K_1K_2[P]^2$. This fact would be a poorer σ-donor ligand than methanol.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.484-492
• /
• 1998

The formation mechanism of the epitaxial cobalt silicide from Co/Ti/OOO) Si structure has been investigated. The transition temperature of CoSi to CoSi, was found to increase with increasing the Ti interlayer thickness, which may be owing to the occupation of the tetrahedral sites by Ti atoms in the CoSi crystal structure as well as the blocking effect of the Ti interlayer on the diffusion of Co. Also, the Co- Ti-O ternary compound formed at the metal! Si interface at the begining of silicidation, which seems to play an important role in epitaxial growth of Co silicide. The final layer structures obtained after a rapid thermal annealing of the Cot Ti/( 100) Si bi-layer structure turned out to be Ti oxide/Co- Ti-Si/epi-$CoSi_2$/OOO)

• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2016

Magnesium potassium phosphate cement (MKPC) is an effective agent for solidification/stabilization (S/S) technology. To further explore the mechanism of the S/S by MKPC, two kinds of Cd including $Cd(NO_3)_2$ solution (L-Cd) and municipal solid waste incineration fly ash (MSWI FA) adsorbed Cd (S-Cd), were used to compare the effects of the form of heavy metal on S/S. The results showed that all the MKPC pastes had a high unconfined compressive strength (UCS) above 11 MPa. For L-Cd pastes, Cd leaching concentration increased with the increase of Cd content, and decreased with the increase of curing time. With the percentage of MSWI FA below 20%, S-Cd pastes exhibited similar Cd leaching concentrations as those of L-Cd pastes, while when the content of MSWI FA come up to 30%, the Cd leaching concentration increased significantly. To meet the standard GB5085.3-2007, the highest addition of S-Cd was 30% MSWI FA (6% Cd contained), with the Cd leaching concentration of 0.817 mg/L. The S/S of L-Cd is mainly due to chemical fixation, and the hydration compound of Cd was $NaCdPO_4$, while the S/S of S-Cd is due to physical encapsulation, which is dependent on the pore/crack size and porosity of the MKPC pastes.

• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.906-913
• /
• 1992

The polymeric compound [{$W(NO)_2Cl_2$}$_n$] were prepared by reductive nitrosylation of $WNaNO_2$ and acidified $WFeSO_4$ with $WWCl_6$ at room temperature. The reactions of [{$W(NO)_2Cl_2$}$_n$] with unidentate and bidentate ligands afforded neutral monomeric [$W(NO)_2Cl_2L_2$(or L-L)] in a relative high yields (70$\sim$90%). 3,5-lutidine, ${\gamma}$-cyanopyridine, 1,2-phenylenediamine, 1,10-phenanthroline, sym-diphenylethylenediamine, 9,10-phenanthrenequinone, 1,3-bis(diphenylphosphino)propane, 1,1'-bis(diphenylphosphino)ferrocene and 8-hydroxyquinoline were used as coordinating ligands. These dinitrosyltungsten complexes were characterized by elemental analysis, $^1H$-NMR, infrared, and UV-visible spectroscopy are reported. The spectral data indicated that geometric structures of the products were cis-dinitrosyl-trans-dichloro-cis-$L_2$ of $C_{2v}$ symmetry.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.934-940
• /
• 2010

The reduction of [$Os_3(CO)_{11}P(OMe)_3$] and subsequent ionic coupling of the reduced species with $[Ru({\eta}^5-C_5H_5)(CH_3CN)_3]^+$ resulted in the formation of [$Os_3(CO)_{11}P(OMe)_3(Ru({\eta}^5-C_5H_5))_2$] which can be converted to spiked tetrahedral cluster, [$HOs_3(CO)_{11}P(OMe)_3Ru_2({\eta}^5-C_5H_5)(C_5H_4)$] via the intramolecular hydrogen transfer. Due to the unavailability of a suitable single crystal, the PW91/SDD and LDA/SDD density functional methods were used to predict possible structures and the available spectroscopic information (IR, NMR) of [$Os_3(CO)_{11}P(OMe)_3(Ru({\eta}^5-C_5H_5))_2$]. The most probable geometry found by constrained search is the isomer (a2) in which the phosphite, $P(OMe)_3$, occupies an axial position on one of the two osmium atoms that is edge bridged by the $Ru(CO)_2({\eta}^5-C_5H_5)$ unit. By using the most probably geometry, the predicted infrared frequencies and $^1H$, $^{13}C$ and $^{31}P$ NMR chemical shifts of the compound are in the same range as the experimental values. For this type of complex, the LDA/SDD method is appropriate for IR predictions whereas the OPBE/IGLO-II method is appropriate for NMR predictions. The activation energy and reaction energy of the intramolecular hydrogen transfer coupled with the structural change of the transition metal framework were estimated at the PW91/SDD level to be 110.32 and -0.14 kcal/mol respectively.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.1958-1962
• /
• 2007

The title complex, Ir(H)(CO)(PEt3)2(η 2-C60) (2), has been prepared by the reaction of excess C60 (4 equiv) with a tetrairidium complex Ir4(CO)8(PEt3)4 (1) in refluxing chlorobenzene in 40% yield as green crystals. Compound 2 has been characterized by cyclic voltammetry (CV), spectroscopic methods (mass, IR, 1H and 31P NMR), and a single crystal X-ray diffraction study. The molecular structure reveals that the iridium atom of 2 is coordinated by two axial ligands of a hydrogen atom and a carbonyl group, and three equatorial ligands of two phosphorus atoms and an η 2-C60 moiety. The CV study exhibits three reversible one-electron redox waves for the successive reductions of 2, together with additional four redox waves due to free C60 reductions, which was formed by decomposition of 2 in the reduced states. The three reversible redox waves of 2 are shifted to more negative potentials by ca. 270 mV compared to free C60, reflecting both metal-to-C60 π-back-donation and the electron-donating nature of the two phosphorus ligands.