• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.130-134
• /
• 2016

The anodization of ADC12 aluminum alloy was investigated in the metal anionic acid media. Anodic oxide films containing foreign elements were formed on ADC12 Al alloy by anodization in the anion complex solution. Furthermore, the rough surface and cracks were considerably smoothened by the deposit of metal anions. When the size of metal anion was small, relatively large amount of metal anions was loaded in anodic films. Existence of $MoO_3$, $TiO_2$ and MgO was confirmed by XPS. According to the results of Tafel analysis, Mo oxide represented the most noble anti-corrosion potential due to $MoS_2$ formation. Corrosion current densities were generally higher than that of pristine anodic oxide without anion complexes.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.524-533
• /
• 2008

Industrial wastewater generated in the electroplating and metal finishing industries typically contain toxic free and complex metal cyanide with various heavy metals. Alkaline chlorination, the normal treatment method destroys only free cyanide, not complex metal cyanide. A novel treatment method has been developed which destroys both free and complex metal cyanide as compared with Practical Plant(I). Prior to the removal of complex metal cyanide by Fe/Zn coprecipitation and removal of others(Cu, Ni), Chromium is reduced from the hexavalent to the trivalent form by Sodium bisulfite(NaHSO$_3$), followed by alkaline-chlorination for the cyanide destruction. The maximum removal efficiency of chromium by reduction was found to be 99.92% under pH 2.0, ORP 250 mV for 0.5 hours. The removal efficiency of complex metal cyanide was max. 98.24%(residual CN: 4.50 mg/L) in pH 9.5, 240 rpm with 3.0 $\times$ 10$^{-4}$ mol of FeSO$_4$/ZnCl$_2$ for 0.5 hours. The removal efficiency of Cu, Ni using both hydroxide and sulfide precipitation was found to be max. 99.9% as Cu in 3.0 mol of Na$_2$S and 93.86% as Ni in 4.0 mol of Na$_2$S under pH 9.0$\sim$10.0, 240 rpm for 0.5 hours. The concentration of residual CN by alkaline-chlorination was 0.21 mg/L(removal efficiencies: 95.33%) under the following conditions; 1st Oxidation : pH 10.0, ORP 350 mV, reaction time 0.5 hours, 2nd Oxidation : pH 8.0, ORP 650 mV, reaction time 0.5 hours. It is important to note that the removal of free and complex metal cyanide from the electroplating wastewater should be employed by chromium reduction, Fe/Zn coprecipitation and, sulfide precipitation, followed by alkaline-chlorination for the Korean permissible limit of wastewater discharge, where the better results could be found as compared to the preceding paper as indicated in practical treatment(I).

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.399-406
• /
• 2009

The fluorescence study was performed to see whether the adsorption orientation of 4-biphenyl acetonitrile(BPAN) on metal colloids can be changed by forming an inclusion complex with $\alpha$-cyclodextrin($\alpha$-CD). The fluorescence quenching was observed with increasing temperature to confirm the direct adsorption of BPAN to the Au and Ag colloidal surfaces. BPAN adsorbed on the metal colloids formed inclusion complex with $\alpha$-CD regardless of the kinds of metal colloids. The formation constants, 32 $M^{-1}$ and 13 $M^{-1}$ for Au and Ag colloids respectively, were obtained with Benesi-Hildebrand plot. The molecules adsorbed on both the Au and Ag colloidal surfaces behaved similarly to each other, leading to the conclusion that the orientation of BPAN adsorbed on the metal colloids can be modified with $\alpha$-CD.

• Journal of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.121-129
• /
• 1984

The adsorption characteristics of heavy metal ions $(Ni^{2+}$, $Zn^{2+}$) on domestic activated carbon which manufactured from the wood, waste rubber and coal has been studied. The following conclusions were obtained by investigating the effect of pH, halides, cyanide and temperature on the absorption of heavy metal ions and by determining absorption rate and absorption isotherms. When heavy metal ions were adsorbed on activated carbon in the pH range from 6 to 7, treated heavy metal ions were almost come to the equilibrium and recovered in the form of complex anions such as $MX_4^{2- }$and $M(CN)_4^{2-}$ in an hour. The absorption isotherms of heavy matel ions were well fitted in Freundlich's equation. Heavy metal complex anions on activated carbon were easily eluted by using 0.1N HCl solution. These results suggest that the complex anions have unexpectedly strong affinity for the surface of activated carbon.

• Applied Biological Chemistry
• /
• v.21 no.1
• /
• pp.22-30
• /
• 1978

The Fe complex formation of cyanidin-3-glucoside in acetate buffer solution $(pH1.7{\sim}6.0)$ was investigated spectrophotometically. Two different complexes were formed from cyanidin-3-glucoside and $Fe^{3+}$, which had the absorption maximum at 543nm in the pH range $3.0{\sim}4.0$ and at 570nm in the pH range $5.0{\sim}6.0$ respectively. The molar ratio of the complex formed in the lower pH range was appeared to be 1 : 1, whereas that of the complex formed in the upper pH range was not able to be determined definitely. Among several organic acids examined, citric acid has shown the marked inhibitory effect on the Fe-anthocyanin complex formation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.215-224
• /
• 2003

This paper presents an electronic ballast using a novel complex modulation method for the metal halide lamp. The proposed modulation method, which has a modulating signal of swept complex frequency, can eliminate the acoustic resonance more effectively than the conventional modulation method, which has a modulating signal of constant frequency. For the purpose of future application specific integrated circuits (ASIC). the controller of the proposed ballast has been designed only with erasable programmable logic devices (EPLDs), but without a microprocessor. In this paper, detailed proposed modulation schemes are described and experimental results on the proto type 150W metal halide lamp ballast with the proposed modulation method ate discussed.

• Journal of the Korean Magnetic Resonance Society
• /
• v.18 no.2
• /
• pp.74-81
• /
• 2014

The $N_2O_2$ tetradentate Schiff base ligand, N,N'-bis(salicylidene)pentane-1,3-diamine (Salpn), coupled with 1:2 concentration ratio of 1,3-diaminopentane and salicylaldehyde was used to produce a series of macrocyclic Nikel(II) complexes. In the metal complexation, it was observed that Salpn macrocyclic ligand can adopt more than a metal ion giving an unique multinuclear metal complexes including Ni(II)Salpn and $Ni(II)_3(Salpn)_2$. Characteristic IR ${\upsilon}(M-O)$ peaks for Ni(II)Salpn and $Ni(II)_3(Salpn)_2$ were observed to be $1028cm^{-1}$ and $1024cm^{-1}$, respectively. Characteristic UV-Vis absorption ${\lambda}_{max}$ peaks for $Ni(II)_3(Salpn)_2$ were observed to be 241nm and 401 nm. Structural characterization of $Ni(II)_3(Salpn)_2$ by NMR exhibits that the salicylidene ring moiety has two different resonance signals originated from the magnetically asymmetric diligand and trinuclear bis complex. Complete NMR signal assignments and characterizations elucidating structural features of $Ni(II)_3(Salpn)_2$ were described in detail.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.379-389
• /
• 2000

This study was focused on the investigation for the heavy metal contamination of soils derived from Yoecheon Industrial Complex in Chonnam Province. Total 201 soil samples including farmland, paddy, forest and playground soils were collected, extracted by 0.1N HCl and analyzed for Cd, Cu, Cr, Fe, Mn and Zn using AAS. Most pH values in soils were weak acidic ranges of 4-6, while some of them were over 8.0. Concentrations of Cd, Cu, Fe and Zn in the soils tend to be relatively high around the Au-Ag mine area, railroad stations and oil station, however, those of Cr, Mn and Pb show high at the northside of Pohang Steel Co (POSCO). Cadmium-Zn couples, and Cd-Zn and Zn-Cr couples have relatively good correlations in the farmland soils and paddy soils, respectively. Concentrations of Cd, Fe and Zn with depth tend to be higher in the top soils than in the bottom soils, but those of Cu and Pb do not show regular variations with depth.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.7-13
• /
• 2006

infrared(IR) absorption spectra were calculated for the ethyl ester of p-tert-butylcalix[4]arene (1) in the cone conformer and its alkali-metal-ion complex. The vibrational spectra were obtained by restricted Hartree-Fock (RHF) calculations with the 6-31G basis set. The characteristic vibrational frequencies of various C-O and C=O stretching motions of the complexes show that the structure of 1+K+ complex is almost of C4v symmetry compared to 1+Na+ (C2v) analogue. The theoretical results for the host molecule 1 and complex (1+Na+) were compared with the experimental results, and the calculated vibrational frequencies agree well with the features of the experimental spectra.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1711-1713
• /
• 2000

We fabricated an IMI-O polymer containing an imidazole group that could form a complex structure between the monolayer and the metal ions at the air-water interface. Also, the surface analysis and the electrical properties of metal ion complex of Langmuir-Blodgett (LB) films were investigated by using $\pi$-A isotherms. Atomoic force microscopy (AFM), current-voltage (I-V) measurements. In the $\pi$-A isotherms the molecular area was expanded with $Fe^{3+}$ concentration increase. It is considered that the expansion of molecular area is due to electrostatic repulsion between the polymer chains and hydrophobic increase of ionic strength. In the I-V characteristics, it is found that the limiting area has effects on the change of conductivity. And, the dielectric relaxation time decreased for increase of the $Fe^{3+}$ concentration.