• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.299-304
• /
• 1995

The adsorption behaviors of Ba(II), Cr(II), Fe(II) and Cu(II) on the N, N'-bispalmtoyl 1, 12-diaza-3, 4:9, 10-dibenzo-5, 8-cyclopentadecane (hexadecyl $NtnOenH_4$)-octadecylsilanized silicas(ODS) were investigated with water as the mobile phase. Binding constants for metal ions were measured in aqueous solution. The order of binding constants(K) and the degree of sorption(E) were Ba(II)$NtnOenH_4$-octadecyisiianized silicas(ODS) increased with concentration of metal ions, and the degree of adsorption was found to be affected by the cation-chelation mechanism. The experimental results showed good efficiency for separation of Cu(II) from mixtures of Ba(II), Cr(II), Fe(II) and Cu(II) in aqueous solution.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.359-368
• /
• 1986

Solvent extraction equilibria of alkali metal cation with crown ether (DC18C6, DC24C8) and HDEHP have been studied. The extraction equilibrium constants increase in the order of, in the DC18C6 system, $Na^+, and in the DC24C8 system, $Rb^+. The species extracted to organic phase are $M_1(crown ether)_1\;(HDEHP)_1$. The magnitude of extraction equilibrium constant is determined by the distribution ratio of crown ether between organic and aqueous phase, and stability constant of crown ether-alkali metal complex.

• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.18-26
• /
• 2007

The transport and removal characteristics of cobalt ions were investigated in a continuous electrodeionization with cation exchange textile (CEDI-CET). It was shown that the removal properties of cobalt ions are strongly dependent on the operating parameters such as temperature, flow velocity, and the solution pH. The transport and removal of cobalt ions was mainly related to the sorption on the surface and the convection and electro-migration through the ion exchange medium. In this study, the CEDI-CET showed good process performance for the removal of metal ions compared with the conventional CEDI with resins.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.38-44
• /
• 1992

In thisy study the quantities of the inorganic ions in the precipitation of the rural area of Choongbook Province are analyzed. The sampling period of the study was between February and June of 1991. Anion concentrations were determined by ion chromatography. Metal cation concentrations were analyzed by atomic absorption spectroscopy. Nessler's reagent was used for ammonium ion. The average pH of the rain was 4.6. Occasionally, however, acidic rain of pH 3.5 was found. The ratio of anion/cation was 0.57, where the concentrations of anion was much smaller than the same of the cation. This was attributed to the high concentrations of the ammonium ion. Ion concentrations were higher in February and March than other months. Also, it was found that the $2[SO_4^{2-} + [NO_3^-]-[NH_4^+]$ gave the highest correlation with the pH values.

• Journal of Environmental Science International
• /
• v.7 no.2
• /
• pp.157-164
• /
• 1998

preliminary study on the chemical compositions of forty seven precipitations from March 1994 to May 1995 In Yeoncheon-gun, which Is adjacent to the southern boundary of demilitarized zone (DMZ) in the northernmost tip of Kyunggi Province has been Performed. The metal cation and anion concentrations were measured by atomic absorption spectrometer and ion chromatography, respectively. pH/lon meter and direct nesslerization method were used for the concentration measurements of $H^+$ ion and $NH_46+$ ions, respectively Based on the data, the quantitative orders of the cation and anion average concentrations were $Ca^{2+}>NH_4^+>Na^+>K^+>Mg^{2+}>H^+ and SO_4^{2+}>Cl^-> NO_3^-$, respectively..The ratio of average total anion concentration to average total cation concentration was 0.97. The average pH value of the precipitations was 5.60. These results, correlation coefficients between the ion concentrations, and monthly variations of pH value and precipitation amount are used for chemical analysis on the environmental Pollution and Pollutant sources In Yeoncheon-gun of Kyunggi province near DMZ.

• Journal of Environmental Science International
• /
• v.17 no.12
• /
• pp.1373-1380
• /
• 2008

Anthracene appended new host compounds have been synthesized by imine reaction. Fluorescent open chain host compounds Trisanthryl-tris(2-aminoethyl)imine 1 was synthesized from the reaction of tris(2-aminoethyl)amine and anthracene-9-carboxaldehyde in EtOH. Tris-10-chloroanthryl-tris(2-aminoethyl)imine 2 was synthesized from tris(2-aminoethyl)amine and 10-chloro-9-anthraldehyde in EtOH. The structures of all reaction product were identified by $^1H$ NMR, $^{13}C$ NMR, GC/MS, FAB Mass, IR spectrum and DSC. Cation complexation behavior was investigated by fluorescence spectroscopy measurements. The capability of transition metals cation recognition between fluorescent open chain host compound 1, 2 were investigated with $Co^{2+},\;Ni^{2+}\;and\;Cu^{2+}$. The fluorescence intensity was increased by host compounds corresponding guest cations. The relative order of fluorescence intensity changes were $Co^{2+}>Cu^{2+}>Ni^{2+}$. Compound 2 is very sensitive fluorescent sensor of $Co^{2+}$ ion.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.218-224
• /
• 1999

Continuous ion exchange characteristics of the synthetic coolant contained Ni, Co and Ag ions of low concentration in acidic-oxidizing conditions have been studied to suggest the guideline for the optimum operation of mixed-bed demincralizer during the shutdown period of a pressurized water reactor (PWR). In the effect of the form of cation resins on the removal capacity of metal ions, the performance of a $H^+$-form resin was about 6% higher than that of a $Li^+$-form resin. Mixed-bed of cation and anion resins in comparison with nonmixed-bed of them, had no affected on the removal capacity of metal ions but very slightly increased the slope of breakthrough curves of metal ions. In the effect related to acidic-oxidizing conditions of the coolant, the addition of boric acid very slightly decreased the slope of breakthrough curves of metal ions, while the addition of hydrogen peroxide slightly decreased the removal capacity of metal ions.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.129-136
• /
• 2004

Titanium and [titanium+Na(K)] substituted 11${\AA}$ tobermorites solids synthesized under hydrothermal conditions at 180$^{\circ}C$ exhibit cation exchange properties toward heavy transition metal cations, such as Fe$^{2+},\;Zn^{2+},\;Cd^{2+}\;and/or\;Pb^{2+}$. The amount of heavy metal cations taken up by these solids was found in the order: Fe$^{2+}>Zn^{2+}>Cd^{2+}>Pb^{2+}$, and reached maximum at 10% [Ti+K]-substituted tobermorite. The total cation exchange capacity of the 10% Ti+Na (K) - substituted tobermorites synthesized here range from 71 to 89 meq/100 g, and 50-56 meq/100g for Ti-substituted only. Results indicated that 10% [Ti+K] substitution exhibit cation exchange capacity more 2.4 times than the unsubstituted-tobermorite. This is due to the increase of the number of active sites on the exchangers. The incorporation of Ti and/or [Ti+Na(K)] in the lattice structure of synthesized tobermorites is due to exchange of Ti$^{4+}{\Leftrightarrow}2Ca^{2+}\;and/or\;Ti^{4+}+2Na^+(K^+){\Leftrightarrow}3Ca^{2+}$, respectively. The mechanism of Ti and [Ti+Na(K)] incorporations in the crystal lattice of the solids during synthesis and the heavy metal cations uptaken by these solids is studied.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.8-11
• /
• 1997

Current methods of evaluating soil contamination by heavy metals rely on analyzing samples for total contents of metals or quantities recovered in various chemical extracting solutions. Results from these approaches provide only an index for evaluation because these methodologies yield values not directly related to bioavailability of soil-borne metals. In addition, even though concentrations of metals may be less than those required to cause toxic effects to biota, they may cause substantial effects on soil chemical parameters that determine soil quality and sustainable productivity. The objective of this research was to characterize effects of Cu or Cd additions on soil solution chemistry of soil quality indices, such as pH, EC, nutrient cation distribution and quantity/intensity relations (buffer capacity). Metals were added at rates ranging from 0 to 400 mg/kg of soil. Soil solution was sequentially extracted from saturated pastes using vacuum. Concentrations of Cu or Cd remaining in soil solutions were very low as compared to those added to the soils, warranting that most of the added metals were recovered as nonavailable (strongly adsorbed) fractions. Adsorption of the added metals released cations into soil solution causing increases of soluble cation contents and thus ionic strength of soil solution. At metal additions of 200~400 mg/kg, EC of soil solution increased to as much as 2~4 dS/m; salinity levels considered high enough to cause detrimental effects on plant production. More divalent cations (Ca+Mg) than monovalent cations (K+Na) were exchanged by Cu or Cd adsorption. The loss of exchangeable nutrient cations decreased long-term nutrient supplying capacity or each soil. At 100 mg/kg or metal loading, the buffering capacity was decreased by 60%. pH of soil solution decreased linearly with increasing metal loading rates, with a decrement of up to 1.3 units at 400 mg Cu/kg addition. Influences of Cu on each of these soil quality parameters were consistently greater than those of Cd. These effects were of a detrimental nature and large enough in most cases to significantly impact soil productivity. It is clear that new protocols are needed for evaluating potential effects of heavy metal loading of soils.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.17-25
• /
• 2005

The dealuminated and alkali/alkaline-earth metal exchanged Y-zeolites were prepared as a catalyst. Elemental compositions and structures of the prepared catalysts were analyzed by the various spectroscopic techniques such as inductively coupled plasma-atomic emission spectroscopy(ICP-AES), X-ray fluorescence(XRF) and X-ray diffraction(XRD), and the desorption behaviors of adsorbed species on the catalyst surfaces were investigated via NO-TPD experiment. Comparing with the composition of the starting material of NaY zeolite, the magnitudes of Si/Al ratio in catalytic materials were increased after dealumination. The Si/Al ratio of catalytic materials after dealumination followed by Cs and Ba cation exchange were additionally decreased. Dealumination to catalysts induced a destruction of basic frame due to a detachment of aluminum, which results in reducing framework structure, while increasing non-framework structure. This phenomenon becomes more serious with increasing time of steam treatment and even more significant for the cation exchanged catalysts. In NO-TPD experiments, the desorption peaks of NO which indicates an activity point of catalysts shifted to the low temperature region after dealumination and cation exchange. The desorption peaks of the NO-TPD profiles taken after steam treatment also shifted to the low temperature region as the steam treatment time increased. In dealuminated and cation exchanged Y-zeolites, the catalytic activities were more influenced by exchanged cation and the formation of non-framework structure.