• 한국재료학회지
• /
• 제14권2호
• /
• pp.83-89
• /
• 2004

SiC nanotubes were synthesized by SLS growth mechanism using various metal catalysts. Synthesized nanotubes had mean diameters of 20~50 nm and several $\mu\textrm{m}$ length. The kind of catalysts affected microstructures of SiC nanotubes by different diffusion routes. These differences are attributed to catalysts' physical properties and relative activities to the graphite substrate. Fe acted as a good catalyst of SLS growth mechanism. But in case of Ni, SiC nanotubes grew slowly. Optical property was measured by photoluminescence measurement. Relatively broad peak was obtained and mean peak positioned at about 430 nm. This result was the same as other nanocrystalline SiC materials, but was different from the results of bulk SiC probably due to quantum confinement effect and defect in the grown SiC nanotube.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.350-355
• /
• 2015

To develop ceramic composite anodes of solid oxide fuel cells without metal catalysts, a small amount of barium carbonate was added to an $(La_{0.8}Sr_{0.2})(Cr_{0.5}Mn_{0.5})O_3(LSCM)$ - YSZ ceramic composite anode and its catalytic effects on the electrode performance were investigated. A barium precursor solution with citric acid was used to synthesize the barium carbonate during ignition, while a barium precursor solution without citric acid was used to create hydrated barium hydroxide. The addition of barium carbonate to the ceramic composite anode caused stable fuel cell performance at 1073 K; this performance was higher than that of a fuel cell with $CeO_2$ catalyst; however, the addition of hydrated barium hydroxide to the ceramic composite anode caused poor stability of the fuel cell performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.164-165
• /
• 2007

The effect of hydrogen and oxygen plasma treatments on the structural properties of carbon nanotubes (CNTs) has been systematically investigated. The plasma treatment resulted in the removal of the amorphous carbon particles. As the plasma treatment time was longer, the CNT diameter was reduced, regardless of gas types. Especially, for the sample treated in hydrogen plasma, the catalyst metal on the tip of CNTs was eliminated.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.75-78
• /
• 1998

1. Introduction : The clean technology using ion exchange membranes have drawn attention increasingly with advancement of the membrane synthesis. Ion exchange membranes have been used for diffusion dialysis, electrodialysis, electrodialytic water splitting and electrodeionization. Bipolar membranes(BPM), consisting of a cation exchange layer and an an_ion exchange layer, can convert a salt to an acid and a base without chemical addition. Using the bipolar membrane, a large quantity of industrial wastes containing salts can be reprocessed to generate acids and bases. Recent development of high performance bipolar membranes enables to further expand the potential use of electrodialysis in the chemical industry. The water-splitting mechanism in the bipolar membrane, however, is a controversial subject yet. In this study bipolar membranes were prepared using commercial ion exchange membranes and hydrophilic polymer as a binder to investigate the effects of the interface hydrophilicity on water-splitting efficiency. In addition, the water splitting mechanism by a metal catalyst was discussed.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 1부
• /
• pp.367-369
• /
• 2011

본 연구에서는 글리세롤과 우레아를 이용하여 글리세롤카보네이트를 합성하는 반응을 진행하였다. ZnO와 Zn-Al 이원계 금속 산화물 촉매를 제조하고, 제조되어진 촉매를 사용하여 글리세롤의 전환율과 글리세롤카보네이트의 수율을 확인하였고, Al의 첨가에 따른 촉매 특성의 분석과 글리세롤카보네이트 합성반응에서의 역할에 대해 확인하였다. 글리세롤카보네이트 합성 반응에서 ZnO를 단독으로 촉매를 사용한 경우보다 Zn-Al 혼합 산화물을 촉매로 사용하여 반응하였을 때, 부반응이 억제되어 전환율 및 수율이 증가함을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.743-746
• /
• 1998

The Belousov-Zhabotinskii (BZ) reaction, which is composed of a bromate-organic acid-metal catalyst and an acidic solution is a commonly employed chemical oscillating reaction system. Cyclohexanedione (CHD) has been used as an initial organic substrate in oscillation systems. We studied each system of 1,4-CHD/BrO3-/Ce4/H+ and 1,3-CHD/BrO3-/Ce4+/H+ oscillating reactions, and studied the control of oscillating characters in a CHD/BrO3-/Ce4+/H+ batch system using a mixed substrate of 1,4-CHD and 1,3-CHD under a fixed total CHD concentration. In the mixed reactions, 1,4-CHD was used as a main substrate and small amounts of 1,3-CHD were used in order to vary the oscillatory behaviours by changing the mixing amount ratio of two substrates.

• Bulletin of the Korean Chemical Society
• /
• 제17권7호
• /
• pp.625-630
• /
• 1996

The cobalt-substituted polyoxotungstate [(CoPW11O39)5-] has been used as a catalyst in olefin epoxidation and alkane hydroxylation reactions. The epoxidation of olefins by iodosylbenzene in CH3CN yielded epoxides predominantly with trace amounts of allylic oxidation products. cis-Stilbene was streoselectively oxidized to cis-stilbene oxide with small amounts of trans-stilbene oxide and benzaldehyde formation. The epoxidation of carbamazepine (CBZ) by potassium monopersulfate in aqueous solution gave the corresponding CBZ 10,11-oxide product. Other transition metal-substituted polyoxotungstates (M=Mn2+, Fe2+, Ni2+, and Cu2+) were inactive in the CBZ epoxidation reaction. The cobalt-substituted polyoxotungstate also catalyzed the oxidation of alkanes with m-chloroperbenzoic acid to give the corresponding alcohols and ketones. The presence of CH2Br2 in the hydroxylation of cyclohexane afforded the formation of bromocyclohexane, suggesting the participation of cyclohexyl radical. In the 18O-labeled water experiment, there was no incorporation of 18O into the cyclohexanol product when the hydroxylation of cyclohexane by MCPBA was carried out in the presence of H218O. Some mechanistic aspects are discussed as well.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.11-17
• /
• 2022

Direct exposure to toxic and hazardous gases has always been considered as the most pervasive problem worldwide, leading to a gradual increase in the number of asthma patients due to NO_x/SO_x gases inhaling and exposure to 50 ppm formaldehyde gases. Therefore, the development of accurate gas sensors is a key issue for resolving these problems. To address such issues, the development of membranes for selective filtering of target molecules as well as nanocatalyst for enhancing the sensing selectivity is highly crucial. In this review, the research progress for porous membrane materials (e.g. MOFs, and graphene) and nanocatalyst technology for the development of selective and accurate gas sensors will be discussed.

• 신재생에너지
• /
• 제20권1호
• /
• pp.110-115
• /
• 2024

Global sustainable energy needs and carbon neutrality goals make hydrogen a key future energy source. South Korea and Japan lead with proactive hydrogen policies, including South Korea's Hydrogen Law and Japan's strategy updates aiming for a hydrogen-centric society by 2050. A notable advance is the solar thermal chemical water-splitting cycle for green hydrogen production, spotlighted by Korea Institute of Energy Research (KIER) and Niigata University's joint initiative. This method uses solar energy to split water into hydrogen and oxygen, offering a carbon-neutral hydrogen production route. The study focuses on international collaboration in solar energy for thermochemical water-splitting and E-fuel production, highlighting breakthroughs in catalyst and reactor design to enhance solar thermal technology's commercial viability for sustainable fuel production. Collaborations, like ARENA in Australia, target global carbon emission reduction and energy system sustainability, contributing to a cleaner, sustainable energy future.

• 한국결정성장학회지
• /
• 제21권3호
• /
• pp.110-113
• /
• 2011

본 논문에서는 금속촉매를 이용하여 육각형 GaN 피라미드의 꼭지점 부분에만 마이크로 크기의 GaN 구조를 선택적으로 성장시킬 수 있는 결정 성장 방법에 대하여 연구하였다. GaN Template 위에 $SiO_2$ 막을 증착하고 3 ${\mu}m$의 원형 패턴을 형성하여 metal organic vapor phase epitaxy (MOVPE) 방법으로 선택적 결정 성장에 의해 GaN 피라미드를 성장한 후, photolithography 공정을 이용하여 피라미드 꼭지점 부분에만 Au화 Cr을 각각 증착하였다. GaN 피라미드 구조의 꼭지점 부근에만 금속이 증착된 시료를 MOVPE 반응관에 장착하고 10분 동안 GaN 마이크로 구조를 성장하였다. 성장 온도는 650, 700, $750^{\circ}C$로 변화를 주어 특성 변화를 알아보았다. 막대 형상의 마이크로 GaN 구조들은 {1-101} 결정면들을 구성하는 6개의 결정면에 대해 각각 수직한 방향으로 성장되었으며 이들 구조들의 형성조건과 모양은 성장온도와 금속의 종류에 의해 영향을 받는 것을 확인할 수 있었다.