• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.371-379
• /
• 2013

In order to improve the selective oxidation reaction of gaseous ammonia at a low temperature, various types of metal-impregnated activated alumina were prepared, and also physical and chemical properties of the conversion of ammonia were determined. Both types of metal (Cu, Ag) impregnated activated alumina show high conversion rate of ammonia at high temperature (over $300^{\circ}C$). However, at lower temperature ($200^{\circ}C$), Ag-impregnated catalyst shows the highest conversion rate (93%). In addition, the effects of lattice oxygen of the developed catalyst was studied. Ce-impregnated catalyst showed higher conversion rate than commercial alumina, but also showed lower conversion rate than Ag-impregnated sample. Moreover, 5 vol.% of Ag activation under hydrogen shows the highest conversion rate result. Finally, through high conversion at low temperature, it was considered that the production of NO and $NO_2$, toxic by-products, were effectively inhibited.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1248-1254
• /
• 2003

Carbon nanotubes(CNTs) are grown by using Co catalyst metal. CNTs fabricated by PECVD(plasma enhanced chemical vapor deposition) method are studied in terms of surface reaction and surface structure by TEM and Raman analysing method and ate analysed in its electrical field emission characteristics with variation of space between anode and cathode. Acetylene(C$_2$H$_2$) gas is used as the carbon source, while ammonia and hydrogen gas are used as catalyst and dilution gas. The CNTs grown by hydrogen(H$_2$) gas plasma indicates better vortical alignment, lower temperature process, and longer tip, compared to that grown by ammonia(NH$_3$) gas plasma. The CNTs fabricated with Co(cobalt) catalyst metal and PECVD method show the multiwall structure in mid-circle type in tip-end and the inner vacancy of 10nm. Emission properties of CNTs indicate the turn-on field to be 2.6 V/${\mu}{\textrm}{m}$ We suggest that CNTs can be possibly applied to the emitter tip of FEDs and high brightness flat lamp because of low temperature CNTs growth, low turn-on field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.71-75
• /
• 2003

Carbon nanotubes(CNTs) are grown by using Co catalyst metal. CNTs fabricated by PECVD(plasma enhanced chemical vapor deposition) method are studied in terms of surface reaction and surface structure by TEM and Raman analysing method and are analysed in its electrical field emission characteristics with variation of space between anode and cathode. Acetylene($C_2H_2$) gas is used as the carbon source, while ammonia and hydrogen gas are used as catalyst and dilution gas. The CNTs grown by hydrogen($H_2$) gas plasma indicates better vertical alignment, lower temperature process and longer tip, compared to that grown by ammonia($NH_3$) gas plasma. The CNTs fabricated with Co(cobalt) catalyst metal and PECVD method show the multiwall structure in mid-circle type in tip-end and the inner vacancy of 10nm. Emission properties of CNTs indicate the turn-on field to be $2.6\;V/{\mu}m$. We suggest that CNTs can be possibly applied to the emitter tip of FEDs and high brightness flat lamp because of low temperature CNTs growth, low turn-on field.

• 전기화학회지
• /
• 제16권1호
• /
• pp.52-58
• /
• 2013

고분자 전해질 연료전지(Polymer Electrolyte Membrane Fuel Cell, PEMFC) 상용화를 위해 해결해야 할 과제 중의 하나인 가격 저감을 이루기 위한 방법으로 백금 촉매를 대신할 비귀금속(non-precious metal) 촉매 제조에 관한 연구를 수행하였다. 비귀금속 촉매의 합성은 산소환원반응(oxygen reduction reaction, ORR)의 활성점으로 알려져 있는 코발트-질소(Co-N) 결합을 형성하기 위해 질소를 포함하는 폴리아닐린(PANI)과 코발트염(Co precursor), 그리고 카본 블랙(C)을 일정한 비율대로 혼합한 후 특별한 열처리 과정 없이 단순한 화학적 환원법에 제조되었다. 제조된 Co-PANI-C 복합 촉매의 구조 분석을 위해 X-선 회절분석(X-ray diffraction, XRD)과 열중량분석(thermogravimetric analysis, TGA)을 실시하였고, ORR에 대한 활성을 평가하기 위해 rotating disk electrode(RDE) 및 rotating ring disk electrode(RRDE) 측정을 수행하였다. 그 결과 Co-PANI-C 복합 촉매는 ORR반응에 대한 개시 전압은 백금 촉매보다 60 mV 밖에 낮지 않은 값을 보였지만, 반응에 의해 발생되는 환원 전류는 여전히 백금 촉매보다 낮은 값을 보였다. 이 밖에도 전극 회전 속도에 따른 ORR 특성 변화, 전압 사이클 회수에 따른 내구성 변화, 연료전지 적용 시 성능 변화에 대해 논의할 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1264-1268
• /
• 1997

The poly(methylsilene) (1) was modified with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalyst and with the group 6 metal carbonyl M(CO)6 (M = Cr, Mo, W) catalyst, producing the highly cross-linked isoluble polymer and the lowly cross-linked soluble polymer, respectively. An interrelationship between molecular weight and percent ceramic residue yield with metal within the respective group was not found. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weight and lower percent ceramic residue yield than the polymers modified with the group 6 metal carbonyl catalysts do. The catalytic activity of group 4 metallocene combinations appears to be higher at ∼100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls. The pyrolysis of the modified 1 yielded SiC ceramic.

• 대한화학회지
• /
• 제68권2호
• /
• pp.87-92
• /
• 2024

The commercialization of rechargeable metal-air batteries is extremely desirable but designing stable oxygen reduction reaction (ORR) catalysts with non-noble metal still has faced challenges to replace platinum-based catalysts. The nonnoble metal catalysts for ORR were prepared to improve the catalytic performance and stability by the thermal decomposition of ZIF-8 with optimum cobalt loading. The porous carbon was obtained by the calcination of ZIF-8 and different loading amounts of Co nanoparticles were anchored onto porous carbon forming a Co/PC catalyst. Co/PC composite shows a significant increase in the ORR value of current and stability (500 h) due to the good electronic conductive PCN support and optimum cobalt metal loading. The significantly improved catalytic performance is ascribed to the chemical structure, synergistic effects, porous carbon networks, and rich active sites. This method develops a new pathway for a highly active and advantageous catalyst for electrochemical devices.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.644-650
• /
• 2021

본 연구는 지구 온난화의 주요 원인인 이산화탄소를 이용하여 메탄의 개질반응 특성을 수행하였다. 이산화탄소와의 메탄 분해 반응을 전이금속 촉매인 주석을 사용하여 수행되었으며, 주석의 분해 반응성은 니켈, 철과 같은 전이 금속보다 낮으며, 대부분의 분해 반응은 고체 상태 촉매하에 수행된다. 반면에 주석의 녹는점은 505.03K로 액상 촉매하에서 분해가 발생된다. 주석을 사용하는 경우 액상으로 반응하며 메탄이 분해되어 생성되는 고체상 탄소가 촉매에 침적되어 비활성화되는 것을 것을 방지하는 장점이 있다. 이산화탄소를 사용하여 메탄을 분해하는 경우 일산화탄소와 수소를 생성한다. 촉매의 활성과 수명을 높이기 위해 Ni를 사용한 경우 촉매 활성이 향상되었다. 본 연구에서는 과잉습식함침법을 이용하여 촉매를 합성하였으며, 반응 온도, 공간 속도에 따른 활성과 촉매 재생 가능성을 타진하였다. 탄소가 침적된 주석의 촉매 재생 온도는 1023 K로 나타났으며, 니켈을 조촉매로 사용하고 물을 공급하므로써 반응성이 향상되는 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.726-739
• /
• 2013

피셔-트롭쉬 합성 반응은 촉매 표면에서 합성가스 (CO+$H_2$)를 탄화수소로 전환하는 반응이다. 코발트 또는 철계 촉매는 친환경적인 디젤 연료를 생산할 수 있고 합성가스의 전환율이 높은 촉매로 알려져 있다. 피셔-트롭쉬 반응에 사용되는 촉매의 활성은 촉매 표면에서의 활성점에 의존적이다. 활성점은 활성 물질의 크기, 담지량, 환원율, 지지체와 활성물질의 상호작용에 의해 결정된다. FT 촉매 제조 방법으로 활성물질의 크기를 조절하는 등의 새로운 방법들이 시도되고 있다. 여기에서는 촉매의 제조방법과 환원 특성을 비롯한 촉매의 형태와 반응 조건을 포함한 반응기 형태에 대해 알아보겠다.

• 오토저널
• /
• 제3권1호
• /
• pp.46-53
• /
• 1981

This paper describes emission control of hydrocarbon and carbon-monoxide due to oxidizing catalyst. The experiment was performed on a precious metal pelleted catalyst(Pt). The factors of the efficiency for purification due to oxidizing catalyst are space velocity, temperature, composition of exhaust gas and supplementary air. The experiment was carried out to control the factors of efficiency for purification. The results of experimental study show that temperature of catalytic converter, supplementary air and space velocity affected the efficiency for purification of hydrocarbon and carbon monoxide.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.33-36
• /
• 2007

Currently, many structured catalysts using microchannel are researched to apply to fuel reforming. In this paper, ceramic monolith and metal mesh as structured catalysts are investigated for catalytic autothermal reforming. When GHSV increases, each structured catalyst has better performances(hydrogen production, fuel conversion) than packed bed catalyst for autothermal reforming. The major causes seem to be the elevated heat and mass transfer, gas phase reaction and redistribution of packed bed due to high pressure drop.