• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.709-711
• /
• 2000

In this paper, a home network message specification and systems based on the Power Line Communication(PLC) are proposed. As a case study, the home network message specification and systems for the white goods are proposed. It is designed for the various home appliances from the lightning to the white goods using power line communication based on Internet protocol. The proposed home network system is composed of the home network message specification with browsing S/W and embedded H/W design based on the power line communication.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.535-539
• /
• 1991

In this paper, message time delay is considered in the SCCP(Signalling Connection Control Part) of the CCITT common channel signalling system No.7. In this simulation, the protocol of the SCCP is programmed using C language and this program is considered on condiion of only connectionless mode and class 0. This simulation reveals bottleneck point depending on message processing capability in the SCCP, so this simulation shows the low limit of the SCCP's processing capability. We show that bottleneck point is at 2000[ messages/sec ] on model A and at 3500[ message/sec ] in model C.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.4
• /
• pp.17-24
• /
• 2016

In this paper, we propose a AH LSU(Advanced Hybrid QoS Routing Link State Update) Algorithm that improves the performance of Hybrid LSU(Hybrid QoS Link State State Update) Algorithm with statistical information of flow holding time in network. AH LSU algorithm has had both advantages of LSU message control in periodic QoS routing LSU algorithm and QoS routing performance in adaptive LSU algorithm. It has the mechanism that calculate LSU message transmission priority using the flow of statistical request bandwidth and available bandwidth and include MLMR(Meaningless LSU Message Removal) mechanism. MLMR mechanism can remove the meaningless LSU message generating repeatedly in short time. We have evaluated the performance of the MLMR mechanism, the proposed algorithm and the existing algorithms on MCI simulation network. We use the performance metric as the QoS routing blocking rate and the mean update rate per link, it thus appears that we have verified the performance of this algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.4
• /
• pp.51-56
• /
• 2011

In this paper, we propose a CAN message compression method using bit rearrangement to reduce the CAN bus load and the error probability during the transmission of CAN messages. In conventional CAN message compression methods, message compression is accomplished by sending only the differences between the previous data and the current data. In the proposed method, the difference bits are rearranged to further increase the compression efficiency. By simulations in car applications, it is shown that the CAN transmission data is further reduced up to 26% by the proposed method, compared with the conventional method.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.273-274
• /
• 2008

According to current RRC procedures, network does not know either how long it will take the RRC reconfiguration message (such as Physical Channel Reconfiguration (PCR)/Transport Channel Reconfiguration (TCR)/Radio Bearer Reconfiguration (RBR)) to be transmitted over the source cell or how long the UE will take to reconfigure on receiving the message, it has to assume the worst-case. Thus, it typically indicates a conservative activation time, leading to potentially large interruption for voice traffic, particularly if the source cell signal strength has degraded. This proposals allow the UE to receive the serving cell related information (carried today in PCR/RBR/TCR message) in an Active Set Update message.

• ETRI Journal
• /
• v.20 no.1
• /
• pp.16-27
• /
• 1998

In this paper, we consider the acquisition performance of an IS-95 reverse link access channel slot as a function of system design parameters such as postdetection integration length and the number of access channel message block repetitons. The uncertainty region of the reverse link spreading codes compared to that of forward link is very small, since the uncertainty region of the reverse link is determined by a cell radius. Thus, the parallel acquisiton technique in the reverse link is more efficient than a serial acquisition technique in terms of implementation and of acquisition time. The parallel acquisition is achieved by a bank of N parallel I/Q noncoherent correlator are analyzed for band-limited noise and the Rayleigh fast fading channel. The detection probability is derived for multiple correct code-phase offsets and multipath fading. The probability of no message error is derived when rake combining, access channel message block combining, and Viterbi decoding are applied. Numerical results provide the acquisition performance for system design parameters such as postdetection integration length and number of access channel message block repetitions in case of a random access on a mobile station.

• Asia pacific journal of information systems
• /
• v.25 no.2
• /
• pp.239-264
• /
• 2015

This study aims to investigate the effect of message content and source user identity on information diffusion in Twitter networks. For the empirical study, we collected 11,346 tweets pertaining to the three major mobile telecom carriers in Korea for three months, from September to December 2011. These tweets generated 59,111 retweets (RTs) and were retweeted at least once. Our analysis indicates that information diffusion in Twitter in terms of RT volume is affected primarily by the type of message content, such as the inclusion of corporate social responsibility activities. However, the effect of message content on information diffusion is heterogeneous to the identity of the information source. We argue that user identity affects recipients' perception of the credibility of focal information. Our study offers insights into the information diffusion mechanism in online social networks and provides managerial implications on the strategic utilization of online social networks for marketing communications with customers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1590-1594
• /
• 2012

Depend on delay latency rule for message transmission defined in IEC 61850 standard, the fastest message has to be transferred within 3us. This paper suggests how to structure the real time message transmit test environment of IEC 61850 and develope how to securing IEC 61850 communication performance based on IEC 61850 by measuring delay latency of message transfer on embeded linux system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.663-671
• /
• 2014

The Battlefield Management System(BMS) of Ground Fighting Vehicles has employed its own message format but there have been requirements of using the standard message format, KVMF. To meet these requirements, we analyzed BMS and KVMF and incorporated KVMF into BMS. In this paper, we would like to introduce our implementation of KVMF in BMS.