• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.683-691
• /
• 2001

This study aimed to clarify the influencing factors of the mesopore ratio on a pore geometry of surface soil in mixed stands as an index of the water retention capacity. Twenty four factors including site conditions and soil properties were analyzed by spss/pc+ for the data collected from during March to October of 1995. The factors influencing the mesopore ratio(pF2.7) on the surface soil were as follows; mesopore ratio(pF2.7) on the B horizon soil, under vegetation coverage, organic matter contents of surface soil and F layer depth. And influencing factor on the ratio of mesopore in the soil surface was correlated with surface soil hardness and depth of 10cm soil hardness shows high negative significance. Also, multiple regression equations for mesopore ratio of the mesopore ratio of B horizon soil and organic matter contents shows high significance($R^2$; 0.84).

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.314-323
• /
• 2001

This study aimed to clarify the influencing factors of mesopore ratio on a pore geometry of surface soil in coniferous stands as an index of the water retention capacity. Twenty three factors including site conditions and soil properties were analyzed by spss/pc + for the data collected during March to October of 1993. The factors influencing the mesopore ratio(pF2.7) on the surface soil were as follows; macropore ratio(pF1.6), slope, crown-cover rates, thickness of F layer, organic matter contents, and the growing stock. And influencing factor on the ratio of mesopore in the soil surface was correlated with percentage of amount of clay, soil surface, A and B horizon soil hardness shows high negative significance. Also, multiple regression equations for mesopore ratios of surface soil and surface soil hardness, clear length, growing stock, B horizon of soil hardness, organic matter contents show high significance($R^2$; 0.80). In coniferous stands, it is effective in promoting development on the ratio of mesopore that forest practice for enhancing of the water resource retention capacity should be carried out when the crown-cover rates of stands are more than 80 percentages.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.20-27
• /
• 2008

This study was conducted to investigate the influence of thinning and pruning on characteristics of forest stand, mesopore ratio and soil water content at the Pinus koraiensis stands in Gwangneung, Gyeonggido. The Pinus koraiensis had been planted in 1976 and thinning and pruning were carried out in 1996. A sample area survey was conducted at experimental plots (thinned and unthinned) in 1998 and 2005, and mesopore ratio and soil water content have been monitored from 2000 to present. Average tree height of the thinned plot increased from 10.9m to 13.2m and from 10.3m to 12.8m for the unthinned plot. Average D.B.H of the thinned plot increased from 15.9cm to 21.1cm and from 14.5cm to 16.7cm for the unthinned plot during the period 1998-2005. Crown density at the thinned plot increased from 81.5% to 95.0% and from 89.5% to 95.0% for the unthinned plot during the period 1998-2005. Mesopore ratio (pF2.7) of A layer soil at the thinned plot was 40.1% while that of the unthinned plot was 37.3%. Changes of mesopore ratio at unthinned plot were not associated with stand age, but those at thinned plot had increased and then decreased, showing declining of the practice effect. Average soil water content at the thinned plot were 23.7% and 22.4% for the unthinned plot. Soil watercontents at both plots have been increased with increase in stand age. But the difference of soil watercontent at each plot has been decreased, especially at the depth of 10cm.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.450-457
• /
• 2001

This study aimed to clarify the influencing site factors of the mesopore ratio on a pore geometry of surface soil in deciduous stands as an index of the water retention capacity. Fifteen factors including site conditions and soil properties were analyzed by spss/pc+ for the data collected during March to October of 1994. The factors influencing the mesopore ratio(pF2.7) on the surface soil were as follows; tree height, under vegetation coverage and organic matter contents of soil. And influencing factor on the ratio of mesopore in the soil surface was correlated with surface soil hardness shows high negative significance. Also, multiple regression equations for mesopore ratios of surface soil hardness, organic matter contents of soils show high significance($R^2=0.84$). In deciduous stands, it is effective in promoting development on the ratio of mesopore that forest practice for enhancing of the water resource retention capacity should be carried out when the under vegetation coverage rates of stands are maintained from 30 to 80 percentages.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.479-485
• /
• 2008

Porous $TiO_2$ nanostructured particles containing both mesopores and macropores were fabricated by utilizing an aerosol templating method from two kinds of starting materials (colloidal mixture of $TiO_2$ nanoparticles and PS particles, and that of TTIP solution and PS particles). The effects of mixing ratio of PS to $TiO_2$ and reactor temperature on the particle properties were investigated. When $TiO_2$ nanoparticles were used as starting materials, the increase of macropores number was observed by SEM and the specific surface area and total pore volume were increased from $31.6m^2/g$ to $39.1m^2/g$ and $0.068cm^3/g$ to $0.089cm^3/g$, respectively, by increasing the weight mixing ratio of $PS/TiO_2$ from 0.79 to 1.31. When TTIP was used as precursor, the specific surface area and mesopore volume of particles prepared at same condition decreased by 67% and 75%, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.418-422
• /
• 2005

By introducing spin-coating method to the evaporation induced self-assembly (EISA) process, a simple and reproducible route in controlling the mesophase of silica thin films has been developed for the first time in this work. When a comparatively solvent-rich Si-sol (The atomic ratio of TEOS : F127 : HCl : $H_2O$ : EtOH = 1 : 0.006 : 0.2 : 9.2 : 30) was used as coating solution, the mesophase of resultant silica films was selectively controlled by adjusting the spin-on speed. The cubic mesophase has been obtained from the coating at a low rpm, such as 600 rpm, while the 2-D hexagonal mesophase is formed at a high rpm, such as 2,500 rpm. At a medium coating speed, a mixture of cubic and hexagonal mesophase has been found in the fabricated films. The present results confirm that the evaporation rate of volatile components at initial step is critical for the determination of mesopore structures during the EISA process.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.61-70
• /
• 2007

This study aims to clarify the effect of forest management practices(thinning and pruning) on soil physical properties and water quality to get the fundamental information on the facility of purifying water quality after forestry practices. Rainfall, throughfall, stemflow, soil and stream water were sampled at the study site which consists of Pinus rigida in Jinju National University Experimental Forest for 4 years from Mar. 1, 2002 to Nov. 30, 2006. Averaged tree height of the management site increased by 1.6m, compared to the value of the non-management site in Pinus rigida. Increment of averaged D. B. H. at the management site showed 4.2cm more in Pinus rigida compared with that at non-management sites. Mesopore ratios (pF2.7) and total porosities of A layer soil at the management site increased more than those at the non-management sites in both stands. Otherwise, soil bulk density resulted in being reversely. Water qualities of throughfall, stemflow and buffered soil water were influenced more positively by the management practice. The average electrical conductivity of stream water was $32.9{\mu}S/cm$ within the range of non-polluted stream water.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.304-309
• /
• 1999

Aluminum-pillared clay was prepared by the intercalation of Al-hydroxy oligomer into domestic bentonite. The solid products are characterized by XRD, nitrogen adsorption/desorption, EDX, and SEM. The solid products show relatively high specific surface areas in the range of $104{\sim}228m^2/g$, and their specific surface area, micropore surface area, and micropore volume increase with increasing the mole ratio of OH/Al. From the results of pore size distribution calculated by BJH equation, it was found that aluminum-pillared clay also contains much mesopore near $40{\AA}$. These results indicate that Al-hydroxy oligomer was intercalated into bentonite, and aluminum oxide was pillared among the layers of bentonite, and micropore and mesopore was finally developed into layers. As OH/Al mole ratio increases, the thermal stability of aluminum-pillared clay increases. This result can be explained by the fact that the density of layers is increased due to the formation of aluminum pillars.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2008

Carbon nanofibers with nano-sized structures were evaluated as a active material using supercacitor electrode which could store electrochemical energy reversibly. A feasibility of EDLC electrode was estimated with specific surface area measurement by BET method and mesopore structure of carbon nanofiber surface could be explained electrochemical absorption-desorption in aqueous electrolyte. A capacitance of carbon nanofiber electrode was increased gradually, depending on the ratio of Ketjenblack as a conducting material. Ketjen Black $20{\sim}25\;wt.%$ ratio in electrode was observed a suitable amount of conducting material by cyclic voltametry results.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.446-451
• /
• 2007

Physicochemical properties of carbon nanofibers were evaluated as a supercacitor electrode materials could store electrochemical energy reversibly. A capacitance of carbon nanofiber electrode was increased gradually, depending on the PVDF binder ratio. A feasibility of EDLC electrode was estimated with specific surface area measurement by BET method and mesopore structure of carbon nanofiber surface could be explained electrochemical absorption-desorption in aqueous electrolyte. PVDF 5 wt.% ratio in electrode was observed a suitable binder amount by CV result.