• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.157-166
• /
• 2001

A simulation package has been developed as an event-driven system that can handle the hardware configuration of STC104 and algorithm proposed in the sister paper of ‘Study on High Speed Routers(II).’After various STC104 topology of meshes, torus, and hypercubes are constructed using up to 512 switches, the performance of each topology has been analyzed under different message generation rate in terms of throughputs, latency, and packet blocking time. Modified multicast algorithms for STC104 have been proposed for STC104 after U-mesh and U-torus in order to overcome the multicasting difficulty because of the point-to-point communication method found in STC104. The performance of the multicast algorithms have been analyzed over meshes and torus configuration. Throughput gets higher in the order of mesh, torus, and hypercube. Throughput difference among topology were distinctive in the zone of high message generation rate. Latency and blocking time increased in the order of hypercube, torus, and mesh. U-mesh and U-torus of software multicast showed similar throughput, however, U-mesh peformed slightly better result. These algorithms showed eight to ten times better results compared to individual message pass for 90 destination nodes. Multi-link environment also showed better performance than single-link environment because multi-link network used the extra links for communication.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.428-437
• /
• 2007

Along with the development of network, more and more functions and services are required by users, while traditional network fails to support all of them. Although overlay is a good solution to some demands, using them in an efficient, scalable way is still a problem. This paper puts forward a framework on how to construct an efficient, scalable overlay mesh in real network. Main differences between other overlays and ours are that our overlay mesh processes some nice features including class-of-service(CoS) and traffic engineering(TE). It embeds the end-to-end optimal traffic control law which can distribute traffic in an optimal way. Then, an example is given for better understanding the framework. Particularly, besides good scalability, and failure recovery, it possesses other characteristics such as routing simplicity, self-organization, etc. In such an overlay mesh, an applicable source routing scheme called hierarchical source routing is used to transmit data packet based on UDP protocol. Finally, a guideline derived from a number of simulations is proposed on how to set various parameters in this overlay mesh, which makes the overlay more efficient.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.775-785
• /
• 2013

Because of their exclusive features, millimeter wave directive mesh networks can be considered for small cell backhaul support in urban environments. For this purpose, a network of closely spaced stations has been considered with very directive line-of-sight links operating in the 60-GHz band. An attempt is made to evaluate channel response and interference behavior in such a network, taking into account the effect of building blockage. A simple grid of building blocks is considered as the propagation environment, and wave propagation is simulated using 2.5-dimensional (2.5D) ray tracing (2D with ground effect) to calculate the received signal at different nodes in the network. The results are compared with free space predictions and used to evaluate interference at all nodes in the channel and describe certain characteristics of links, such as the delay profile and the correlation length.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.101-107
• /
• 2009

In existing wireless ad-hoc networks, how to distribute network resources fairly between many users to optimize data transmission is an important research subject. However, in wireless mesh networks (WMNs), it is one of the research areas to avoid gateway bottleneck more than the fair network resource sharing. It is because WMN traffic are concentrated on the gateway connected to backhaul. To solve this problem, the paper proposes Weighted Fairness Time-sharing Access (WFTA). The proposed WFTA is a priority time scheduling scheme based on Weighted Fair Queuing (WFQ).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2362-2378
• /
• 2017

To mitigate the performance degradation caused by performance anomaly, a number of channel assignment algorithms have been proposed for multi-rate wireless mesh networks. However, network conditions have not been fully considered for routing process in these algorithms. In this paper, a joint scheme called Multi-rate Dijkstra's Shortest path - Rate Separated (MDSRS) is proposed, combining routing metrics and channel assignment algorithm. In MDSRS, the routing metric are determined through the synthesized deliberations of link costs and rate matches; then the rate separated channel assignment is operated based on the determined routing metric. In this way, the competitions between high and low rate links are avoided, and performance anomaly problem is settled, and the network capacity is efficiently improved. Theoretical analysis and NS-3 simulation results indicate that, the proposed MDSRS can significantly improve the network throughput, and decrease the average end-to-end delay as well as packet loss probability. Performance improvements could be achieved even in the heavy load network conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.1
• /
• pp.191-210
• /
• 2011

Topology management, which includes neighbor discovery, tracking and updating, is a key area that need to be dealt with appropriately to increase network performance. The use of directional antenna in Wireless Mesh Networks is beneficial in constructing backbone networks viewing the properties of directional antenna. The backbone links must be robust to obtain better network performance. In this paper, a simple yet effective topology protocol is presented that performs well compared to its predecessors. Our protocol constructs the topology with the constraints in the number of links per node. The full topology is constructed in two phases. The resultant topology is termed as Web-topology. The topology formed is robust, efficient, and scalable.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.179-186
• /
• 2011

Wireless Mesh Network technology refers to the technology which establishes wireless network whose transmission speed is similar to that of the wire system, and provides more enhanced flexibility in the building of network, compared to the existing wired network. In addition, it has the feature of less mobility and less restriction from the energy effect. However, there follow many considerations such as system overhead in the case of setting or the selection of multi-path. Accordingly, the focus is on the design and optimization of network which can reflect this network feature and the technology to establish path. This paper suggests the methods on the programming of path in Wireless Mesh Network routing by applying the evaluation value of node service, making use of the loss rate of data, the hop count of bandwidth and link and the traffic status of node, considering the performance of link and load in the fitness evaluation function, in order to respond to the programming of multi-path effectively.

• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.639-654
• /
• 2011

In this paper, we present a channel access mechanism, referred to as the enhanced mesh coordinated channel access (eMCCA) mechanism, for IEEE 802.11s-based wireless mesh networks. The current draft of IEEE 802.11s includes an optional medium access control (MAC), denoted as MCCA, which is designed to provide collision-free and guaranteed channel access during reserved periods. However, the MCCA mechanism fails to achieve the desired goal in the presence of contending non-MCCA nodes; this is because non-MCCA nodes are not aware of MCCA reservations and have equal access opportunities during reserved periods. We first present a probabilistic analysis that reveals the extent to which the performance of MCCA may be affected by contending non-MCCA nodes. We then propose eMCCA, which allows MCCA-enabled nodes to enjoy collision-free and guaranteed channel access during reserved periods by means of prioritized and preemptive access mechanisms. Finally, we evaluate the performance of eMCCA through extensive simulations under different network scenarios. The simulation results indicate that eMCCA outperforms other mechanisms in terms of success rate, network throughput, end-to-end delay, packet-loss rate, and mesh coordinated channel access opportunity-utilization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.54-62
• /
• 2007

We propose a novel authentication protocol for wireless mesh network. The proposed authentication protocol is based on the password scheme for convenience of users. The proposed protocol is evaluated through three analyses. The correctness of the proposed protocol is proved using the GNY analysis. By the security analysis, we show that the proposed protocol is resistant to various attacks. For the performance analysis, we implemented the protocol in Linux operating system based laptop and measured the transmission time. The analytic results show that the proposed protocol provides the secure wireless mesh network without considerable performance degradation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.97-104
• /
• 2010

In this paper, mesh network structure is applied to solve the load balancing problems in the Grid database. Data of the Grid database is replicated to several node for enhanced performance. Therefore, load balancing for user's query is selected node that evaluated workload in it. Existing researches are using passive load balancing method that selected another node after then node overflowed workload. It is inefficient to be applied to Gird database that has a number of node and user's queries almost changes dynamically. The proposed method connected each node which includes the same data through mesh network structure. When user's query occurs, it select node that has the lowest workload. The performance evaluation shows that proposed method performs better than the existing methods.