• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.17-30
• /
• 2000

In this paper, we propose an efficient algorithm to produce 3-D surface model from a set of range data, based on NURBS (Non-Uniform Rational B-Splines) surface fitting technique. It is assumed that the range data is initially unorganized and scattered 3-D points, while their connectivity is also unknown. The proposed algorithm consists of three steps: initial model approximation, hierarchical representation, and construction of the NURBS patch network. The mitral model is approximated by polyhedral and triangular model using K-means clustering technique Then, the initial model is represented by hierarchically decomposed tree structure. Based on this, $G^1$ continuous NURBS patch network is constructed efficiently. The computational complexity as well as the modeling error is much reduced by means of hierarchical decomposition and precise approximation of the NURBS control mesh Experimental results show that the initial model as well as the NURBS patch network are constructed automatically, while the modeling error is observed to be negligible.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.65-73
• /
• 2009

IEEE802.11 Wireless LAN(WLAN) is being widely used in public space such as airport, and increases the networking boundary in campus and enterprise, and it has lastly attracted considerable attention for mesh network and converged network with other 3G mobile communication networks. In WLAN, load balancing among Access Points(AP) is an important issue for efficient resource management or supporting the Quality of Service(QoS) of traffic, but most researches focused on the AP selection in network entry or roaming of Stations(STA). In this paper, we propose an AP-Initiated Flow Redirection(FR) for AP load balancing by monitoring AP's availability in the true sense. When the AP's resource becomes almost saturated, that is used more than a specific threshold, the AP queries the roaming possible neighbor APs about their availability and calculates the distribution of traffic load with statistical methods such as entropy or chi-square. Finally, the AP decides flows and new APs for redirection and performs it. Our simulation results show that our FR mechanism increases the performance in the various views.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.302-311
• /
• 2023

Background: Oral health is an important element of well aging. And oral health also affects overall health, mental health, and quality of life. In this study, we sought to identify oral health influencing factors and research trends for well-aging through text analysis of research on well-aging and oral health over the past 12 years. Methods: The research data was analyzed based on English literature published in PubMed from 2012 to 2023. Aging well and oral health were used as search terms, and 115 final papers were selected. Network text analysis included keyword frequency analysis, centrality analysis, and cohesion structure analysis using the Net-Miner 4.0 program. Results: Excluding general characteristics, the most frequent keywords in 115 articles, 520 keywords (Mesh terms) were psychology, dental prosthesis and Alzheimer's disease, Dental caries, cognition, cognitive dysfunction, and bacteria. Research keywords with high degree centrality were Dental caries (0.864), Quality of life (0.833), Tooth loss (0.818), Health status (0.727), and Life expectancy (0.712). As a result of community analysis, it consisted of 4 groups. Group 1 consisted of chewing and nutrition, Group 2 consisted oral diseases, systemic diseases and management, Group 3 consisted oral health and mental health, Group 4 consisted oral frailty symptoms and quality of life. Conclusion: In an aging society, oral dysfunction affects mental health and quality of life. Preventing oral diseases for well-aging can have a positive impact on mental health and quality of life. Therefore, efforts are needed to prevent oral frailty in a super-aging society by developing and educating systematic oral care programs for each life cycle.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.272-283
• /
• 2010

Wireless Mesh Networks (WMNs) have gained a lot of attention recently. Based on the characteristic of WMNs as a highly connected wireless infrastructure, many efforts from research organizations are made in order to improve the performance of the flow throughput in WMNs. Therefore, it is very critical issue to establish efficient routing paths for multiple concurrent ongoing flows. In this paper, we propose a general modeling methodology to analyze the end-to-end throughput of multiple concurrent flows by analytical calculation taking into account the carrier sensing behaviors, interference and the IEEE 802.11 Distributed Coordination Function mechanism. After the comparison of the average service time for each successful transmission at each node, we analyze the bottlenecks of flows, and hence obtain the maximum end-to-end throughput of them. By using our proposed model, it is possible to predicate the throughput of several candidate routing paths for multiple concurrent ongoing data flows, so we can select the most efficient route that can achieve the highest throughput. We carry out simulations with various traffic patterns of multiple flows in WMNs to validate our modeling and our efficient route selection mechanism.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.37-48
• /
• 2014

Wireless mesh networks have emerged as a key technology in environment that needs wireless multi-hop communication without infrastructure and IEEE 802.11s mesh network standard have currently been established. One of big differences between this standard and the legacy IEEE 802.11 is that MCCA MAC is included to support QoS. MCCA supports bandwidth reservations between neighbors, so it can satisfy the QoS of bandwidth guarantee. However, MCCA has dis-advantages as follow; 1) it can not guarantee end-to-end bandwidth, 2) in multi-interface multi-channel wireless environments, the IEEE 802.11s does not provide a bandwidth reservation protocol and a wireless channel assignment etc. In this paper, we have proposed MIMC R-HWMP, which expands R-HWMP that was proposed in our previous work[3], to support multi-interface multi-channel. By simulation, we showed end-to-end bandwidth guarantee and the increase in the available bandwidth in multi-interface multi-channel wireless mesh networks.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.217-228
• /
• 1999

The three methods of analysis (i) REV(representative elemental volume), (ii) non-REV and (iii) joint network analysis are introduced in this paper to analyze the groundwater flow in jointed rock mass and the inflow into underground excavations. The results from those methods are compared one another to reveal their characteristics by varying the number of joints and the diameter of the opening. The pre-processor, the so-called sequential analysis, is introduced to predict the equivalent hydraulic conductivity of a jointed rock mass having a number of intersecting joints. Using the finite element mesh, joint map and sequential analysis, the equivalent hydraulic conductivities are calculated for all 445 elements. The hydraulic inhomogeneity and the determination of the representative properties of jointed rock masses are discussed. In the REV analysis where the entire rock mass is homogenized through the representative properties, the inflow is increased regularly and consistently by increasing the joint density, the opening size and the conductivity contrast value. Though the non-REV analysis showed irregular variation of the inflow due to the local inhomogeneity allowed to individual elements, the inflow approached the REV results as the characteristic length increases. The joint network analysis showed the most sensitive reaction to the joint density, the opening size and the presence of the network crossing the opening. The reliability of the network analysis depends on the geometric data of individual joints. In view of the limited field data on joint geometry and possible uncertainty the REV and non-REV methods are considered more practical and rational than the joint network analysis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.82-90
• /
• 2013

An Optical Network-on-Chip(ONoC) based on silicon photonics is one of promising technology for next generation exascale computing architectures. Recent active researches on ONoC focus on improving bandwidth further and avoiding path collisions by using wavelength division multiplexing (WDM). However, the number of wavelengths used for the WDM increases linearly as the number of Processing Element (PE) increases in existing ONoCs which adopt centralized routing architecture. The problem will also arises growing cost of optical devices such as light switches and light sources and limits the scalability of ONoC due to the sinal loss caused by interference of distinct light sources. In this paper, we proposes a distributed routing architecture for ONoC which is based on 2D-mesh structure using WDM technique and present a method that minimize the required number of wavelengths exploiting the connectivity of communication. In comparison with existing centralized routing architectures, results show reduction by 56% of the number of wavelengths and 21% of the number of optical switches in $8{\times}8$ networks.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1183-1193
• /
• 2010

The pyramid graph is well known in parallel processing as a interconnection network topology based on regular square mesh and tree architectures. The enhanced pyramid graph is an alternative architecture by exchanging mesh into the corresponding torus on the base for upgrading performance than the pyramid. In this paper, we adopt a strategy of classification into two disjoint groups of edges in regular square torus as a basic sub-graph constituting of each layer in the enhanced pyramid graph. Edge set in the torus graph is considered as two disjoint sub-sets called NPC(represents candidate edge for neighbor-parent) and SPC(represents candidate edge for shared-parent) whether the parents vertices adjacent to two end vertices of the corresponding edge have a relation of neighbor or sharing in the upper layer of the enhanced pyramid graph. In addition, we also introduce a notion of shrink graph to focus only on the NPC-edges by hiding SPC-edges within the shrunk super-vertex on the resulting shrink graph. In this paper, we analyze that the lower and upper bounds on the number of NPC-edges in a Hamiltonian cycle constructed on $2^n{\times}2^n$ torus is $2^{2n-2}$ and $3{\cdot}2^{2n-2}$ respectively. By expanding this result into the enhanced pyramid graph, we also prove that the maximum number of NPC-edges containable in a Hamiltonian cycle is $4^{n-1}$-2n+1 in the n-dimensional enhanced pyramid.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.590-596
• /
• 2020

In the island areas where system connection with the commercial power grid is difficult, it is quite important to find a method to efficiently manage energy produced with independent microgrids. In this paper, a prosumer management system for P2P power transaction was realized through the testing the power meter and the response rate of the collected data for the power produced in the small-scale microgrids in which hybrid models of solar power and wind power were implemented. The power network of the microgrid prosumer was composed of mesh structure and the P2P power transaction was tested through the power meter and DC power transmitter in the off-grid sites which were independently constructed in three places. The measurement values of the power meter showed significant results of voltage (average): 380V + 0.9V, current (average): + 0.01A, power: 1000W (-1W) with an error range within ±1%. Stabilization of the server was also confirmed with the response rate of 0.32 sec. for the main screen, 2.61 sec. for the cumulative power generation, and 0.11 sec for the power transaction through the transmission of 50 data in real time. Therefore, the proposed system was validated as a P2P power transaction system that can be used as an independent network without transmitted by Korea Electric Power Corporation (KEPCO).

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.85-101
• /
• 2012

Parking guidance and information systems have been introduced to response the inefficient and inconvenience use of parking facilities. While advanced countries have reached effective use of parking guidance information system, the Republic of Korea has yet suffered from the lack of full use of advanced technologies. This study proposes an algorithm designed for a systems utilizing the USN technologies. A field test was performed. The test results showed that information from the proposed system is much reliable when compared to the one from the existing.