We developed an inductively coupled plasma (ICP) etcher for GaN etching using a parallel plasma electrode source with a multifunctional chuck matched to it in order for the low power consumption and low process cost in comparison with the conventional ICP system with a helical-type plasma electrode source. The optimization process condition using it for the micro light-emitting diode (µ-LED) chip fabrication was established, which is an ICP RF power of 300 W, a chuck power of 200 W, a BCl3/Cl2 gas ratio of 3:2. Under this condition, the mesa structure with the etch depth over 1 ㎛ and the etch angle over 75° and also with no etching residue was obtained for the µ-LED chip. The developed ICP showed the improved values on the process pressure, the etch selectivity, the etch depth uniformity, the etch angle profile and the substrate temperature uniformity in comparison with the commercial ICP. The µ-LED chip fabricated using the developed ICP showed the similar or improved characteristics in the L-I-V measurements compared with the one fabricated using the conventional ICP method
The hydrogen-rich envelope mass of a dying massive star is the key factor that determines the type and properties of the resulting supernova. Emulating wind-driven mass loss of single stars with the MESA(Modules for Experiments in Stellar Astrophysics) stellar evolution code, we made a grid of models for a large parameter space of initial mass (12 M⊙ to 30M⊙), metallicity (solar, LMC and SMC), hydrogen envelope mass (0.01M⊙ to 10M⊙) for progenitor stars in their final step of evolution. Our results suggest the final luminosity of the progenitor is largely determined by the initial mass, which means there is luminosity degeneracy for stars with the same initial mass but with different hydrogen-rich envelope masses. Since we can break this degeneracy by correcting luminosity with surface gravity (spectroscopic HR diagram), we can infer the exact mass property of an observed progenitor. The surface temperature drastically varies near the envelope mass of ~0.1M⊙ and surface temperature of ~10000 K, where the demarcation between the hydrogen-rich envelope and the helium core lies, which explains the rarity of 'white' supergiants. There also exists a discontinuity in the chemical composition of the progenitor envelope around this critical hydrogen-rich envelope mass of ~0.1 M⊙, which can be tested in future observations of "flash spectroscopy" of supernovae.
One of the distinctive characteristics of the evolution of binary systems would be mass transfer. Close binary systems experience so-called Case A mass transfer during the main-sequence. We have performed calculations of the evolution of massive Case A (with the initial period 1.5 ~ 4.5 days) binary systems with the initial mass of 10 ~ 20 solar masses and mass ratio 0.5 ~ 0.95 using the MESA code. We find that in some systems, after the first mass transfer, the secondary stars evolve faster than the primary stars and undergo so-called 'reverse' mass transfer. Such phenomena tend to occur in relatively low-mass (initial mass < 16 solar masses) and close (initial period < 3 day) systems. Unless a system enters the common-envelope phase, the primary star would become a single helium star after the secondary star ends its life if the system were unbound by the neutron star kick. We find the various evolutionary implications of the remaining primary stars. In addition to the evolution into the compact single helium star progenitor, there is a possibility that the remaining primary star could evolve into a helium giant star, which could be a promising candidate for Type Ibn supernova progenitor, depending on the core mass. Further, we find that some primary stars satisfy the conditions for the formation of electron-capture supernova progenitor.
본 연구는 북한 혜산시의 1957년에서 2006년 사이의 강수량 데이터를 이용하여 Z지수를 지표로 가뭄과 홍수의 변화 과정을 분석하였다. 50년 동안 혜산시 지역의 가뭄과 홍수 출현 빈도를 연도별 및 사계절별로 구분하여 소파형 기법으로 분석하였다. 분석 결과 혜산시의 연도별 및 사계절별 가뭄과 홍수의 발생빈도는 24% 이상으로서 가뭄과 홍수 재해가 빈번하였다. 다항식접합(Polynomial Fit)과 주기분석 결과, 가을철의 가뭄과 홍수는 수십년간(inter-decadal) 특징이 뚜렷하고 연도별 및 봄, 여름 및 겨울에는 수년간(inter-annual) 특징이 잘 나타난다. 최근에는 가을에 가뭄이 많고 연도별과 봄, 여름 및 겨울에는 홍수가 많았다.
Magan-Fernandez, Antonio;O'Valle, Francisco;Pozo, Elena;Liebana, Jose;Mesa, Francisco
Journal of Periodontal and Implant Science
/
제45권6호
/
pp.252-256
/
2015
Purpose: The purpose of this report was to describe the clinical and microbiological characteristics of two rare cases of necrotizing stomatitis, and the outcomes of a non-invasive treatment protocol applied in both cases. Methods: We report two cases of necrotizing stomatitis in a rare location in the hard palate of a 40-year-old woman and a 28-year-old man. Neither had a relevant medical history and both presented with highly painful ulceration in the palate and gingival margin that was accompanied by suppuration and necrosis. 3% hydrogen peroxide was applied to the lesions using sterile swabs, and antibiotic and anti-inflammatory treatment was prescribed to both patients in addition to two daily oral rinses of 0.2% chlorhexidine. Results: In both cases, radiological examination ruled out bone involvement, and exfoliative cytology revealed a large inflammatory component and the presence of forms compatible with fusobacteria and spirochetes. There was a rapid response to treatment and a major improvement was observed after 48 hours, with almost complete resolution of the ulcerated lesions and detachment of necrotic areas with partial decapitation of gingival papillae. Conclusions: Necrotizing periodontal lesions can hinder periodontal probing and the mechanical removal of plaque in some cases due to the extreme pain suffered by the patients. We present a non-invasive treatment approach that can manage these situations effectively.
실리콘 태양전지의 실버 전극과 이미터층 사이의 접촉 비저항은 원형 접촉 비저항 측정법과 선형 비저항 측정법을 이용하여 계측되어 왔다. 원형 접촉 비저항 측정법은 누설 전류를 차단하기 위한 메사 에칭 등의 부가적인 공정이 요구되지 않는 장점이 있으며, 선형 접촉 비저항 측정법은 완성된 태양전지로부터 직접 샘플을 취득하여 측정을 수행할 수 있다는 장점이 있다. 본 연구에서는 이 두 가지 측정법들을 이용하여 실리콘 태양전지 전면 전극의 접촉 비저항을 계산하기 위한 저항값들을 측정할 때 수반되는 문제점들에 대한 비교연구를 수행하였으며, 선형 접촉 비저항 측정법이 실버 전극의 선폭과 두께에 따른 접촉 비저항 변화를 좀더 정확하게 묘사할 수 있는 요인에 대해 설명하였다.
본 연구에서는 AFM 양극산화법을 이용하여 서브마이크로 수준의 패턴을 구성하였다. 자기조립법으로 제조한 MPTMS/Si(100) 기질 위에 AFM 양극산화법으로 패턴을 형성하였고, 비에칭법을 이용하여 아민그룹을 지닌 기능기를 고정시켰다. 금속전극으로는 Frens 방법으로 제조한 금나노입자를 이용하였다. 금속이온의 흡착에 따른 전도도는 근거리의 경우 coherent tunneling에 의존하지만, 원거리 전극에서는 incoherent tunneling에 의존한다. 전극의 간격이 가까울수록 저항이 감소하여 센서의 감도와 최소검출능을 개선할 수 있었다. 또한 다중기능성을 부여하여 센서의 선택도를 부여하였으며, 패턴의 크기에 따른 최소검출농도를 낮출 수 있음을 확인하였다.
활성층의 균일성 차이에 따라 서로 다른 발광특성을 보이는 소자들의 균일성과 신뢰도 사이의 상관관계를 고찰하였다. 소자들을 초기 특성에 따라 균일한 발광특성을 보이는 그룹 I과 불균일한 발광특성을 보이는 그룹 II로 분류하였다. 그룹 II 소자의 경우 온도 의존성이 더 큰 것으로 나타났으며, 두 그룹의 신뢰성 실험을 통해 크게 두 가지 성능저하 과정이 있는 것을 알았다. 칩 전체적으로 균일하게 성능저하 되는 bulk 성능저하 과정과 칩의 edge부분에서부터 성능저하가 시작되는 edge 성능저하 과정이다. 비발광성 결함에 의한 bulk 성능저하는 불균일한 발광특성을 보이는 그룹 II 소자에서 더 빠르게 진행되었다. edge 성능저하는 그룹 I, II 소자에 관계없이 고전류로 aging하였을 경우 나타났으며, n-Ohmic 접촉 영역에서 시작하여 발광하지 않는 부분이 확장되는 성능저하 과정을 확인하였다. 이에 따라 고효율, 고신뢰도 청색 발광 다이오드 제작을 위해서는 활성층의 균일도를 높이고, 전류 밀도를 균일하게 하며, 건식 식각된 mesa면의 passivation을 하여야 한다.
This study was conducted to identify the characteristics of social carrying capacity at mega-events, especially the 2000 Kwangju Biennale in Korea. In particular, this paper has proposed some management policies for mega events taking into account the relations between social carrying capacity, satisfaction and crowding. The research method was to look into the general characteristics and distributive forms of the location, and then to confirm the possibility of sampling the factors involved in satisfaction degree; last, A factor analysis for causal analysis of perceived crowding was performed. The study needed correlation analysis in order to compare expected crowding and perceived crowding, and performed regression to examine the causality of perceived crowding and satisfaction. The research results were as follows: the correlation of expected crowding, perceived crowding, and the total satisfaction was very low or meaningless. The relation between satisfaction and elements for factor analysis such as convenient facilities and value experience showed partial meaningfulness. The factors of convenient facilities, entrance fee, parking lot use, toilet convenience, and exhibit room use had meaningful results; on the other hand, the factors of value experience showed a meaningful result in the guide service of an event place. In conclusion when those holding an event make a basic project, they should consider management measures for convenience of facilities, proper education for guide service, and systematic guidance. Also, as a method for perceived crowding lower than expected crowding, the study has proposed that it is possible to lower expected crowding by providing appropriate information on the number of tourists expected on the weekends and weekdays. Future research should control variables such as personal characteristics, seasons proper for vacation and holidays, and carefully consider their investigation and design. Moreover, it is necessary to study variables involved in expected crowding of more various space-intensive sightseeing places (mesa-events).
2단계 메사 식각 공정과 유기 금속 화학 증착방법으로 높은 비저항을 갖는 Fe-도핑된 반절연 InP층의 전류 차단층을 갖는 10 Gb/s 광통신용 초고속 1.55.mu.m 궤환형 반도체 레이저 다이오드를 제작하였다. 제작된 DFB-LD의 특성은 발진 임계전류~15 mA, slope efficiency ~0.13 mW/mA, 동 저항 ~6.0.OMEGA.이었고, 발진 파장은 1.546 .mu.m이며, 6 Ith까지의 전류에도 인접 모우드 억압비, SMSR>40dB 이상 (CW상태)으로써 안정된 단일 모우드 동작을 보였다. DFB-LD의 소신호 주파수 특성으로 27 mA의 작은 구동전류에서 이미 -3dB 대역폭이 10 GHz에 도달하였음을 보여주었고, 또한 최대 -3dB 대역폭으로 구동전류 90 mA에서 ~18 GHz까지 얻는 우수한 소신호 주파수 특성을 보여주었다. 10 Gb/s DFB-LD 모듈 전송시험에 있어서, 1.55.mu.m 파장의 레이저 다이오드 모듈로 일반 단일모우드 광섬유와 분산천이 광섬유에 대해서 전송시험한 결과 에러평탄면(error floor)없이 각각 10 km, 80 km를 전송할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.