• 대한교통학회지
• /
• 제21권3호
• /
• pp.107-120
• /
• 2003

수십년동안 합류부 교통특성 및 현상을 다루는 많은 연구가 있어 왔지만 합류부 교통류를 평가하는 분석방법론은 그리 많이 개발되지 않았고 특히 합류용량에 대한 연구는 거의 이루어지지 않았었다. 본 연구는 합류부에서 강제합류를 포함한 합류용량을 확률적으로 결정하는 모형 개발을 목적으로 수행되었다. 고속도로 본선 바깥 차로의 시간차두간격 분포를 Erlang 분포로 가정하고 간격수락이론을 이용하여 합류용량 산정 모형식을 개발하였고, 이때 본선 차두간격이 임계간격보다 작은 경우 발생되는 강제합류 형태가 용량 산정식에 반영되었다. 또한. 합류용량 모형식에서 중요한 변수로 사용되는 임계간격을 결정하고자 연결로에서 진입하는 개별차량의 합류 행태를 조사하여 회귀분석을 통한 모형식을 구축하였다. 개발된 용량식을 토대로 합류용량 값들을 도로 및 교통 조건에 따라 제시하였는데 임계간격 크기가 커지고 연결로 진입교통량이 많아질수록 합류용량은 적게 산출되었다. 이러한 합류용량 값의 변화는 기존 HCM 방법에서 제시하고 있는 하나의 고정된 용량 값과는 다른 결과로 해석되고, 변화하는 합류용량 값은 앞으로 연결로 접속부 교통운영에서 고려해야 할 주요한 파라메타라고 생각된다.

• 한국수자원학회논문집
• /
• 제51권2호
• /
• pp.131-140
• /
• 2018

강우는 물순환 시스템을 이해를 증가 시킬 뿐만 아니라, 효율적인 수자원 확보 및 관리에 있어서 가장 핵심적인 인자이다. 본 연구는 2015년을 대상으로 한반도에서의 92개의 ASOS 지점자료와 최근에 발사된 GPM 위성강우 자료의 비교를 통하여 활용가능성을 평가하였다. 또한 지점 자료의 장점과 인공위성 자료의 장점을 융합함으로써 보다 개선된 강우자료를 산출하기 위해 3가지의 상세화 방법(Geographical Differential Analysis, Geographical Ratio Analysis, Conditional Merging)들을 적용하였다. 이 연구에서 도출된 결과는 다음과 같다. 1) ASOS 자료와의 검증을 통해 GPM 강우자료가 약간 과대산정되는 편향을 가지고 있는 것을 확인하였으며, 특히 여름 기간에 오차가 높게 발생하는 것으로 나타났다. 2) Jackknife 방법을 통하여 각 합성방법에 대해서 검증하였을 때, 공간해상도가 높아짐에 따라서 오차가 줄어드는 것을 확인하였으며, 상세화 방법 중 conditional merging 방법이 가장 좋은 성능을 나타내었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.154-154
• /
• 2019

Characterization of reliable field-scale root-zone soil moisture (RZSM) variability contribute to effective hydro-meterological monitoring. Although a promising cosmic-ray neutron probe (CRNP) holds the pontential for field-scale RZSM measurement, it is often restricted at deeper depths due to the non-unique sensitivity of CRNP-measured fast neutron signal to other hydrogen pools. In this study, a merging framework relied on coupling cosmic-ray soil moisture with a representative additional RZSM, was introduced to scale shallower CRNP effective depth to represent root-zone layer. We tested our proposed framework over a densely vegetated region in South Korea covering a network of one CRNP and nine in-situ point measurements. In particular, cosmic-ray soil moisture and ancillary RZSM retrieved from the most time stable location were considered as input datasets; whereas the remaining point locations were used to generate a reference RZSM product. The errors between these two input datasets and the reference were forecasted by a linear autoregressive model. A linear combination of forecasts was then employed to compute a suitable weight for merging two input products from the predicted errors. The performance of merging framework was evaluated against reference RZSM in comparison to the two original products and a commonly used exponential filter technique. The results of this study showed that merging framework outperformed other products, demonstrating its robustness in improving field-scale RZSM. Moreover, a strong relationship between the quality of input data and the performance merging framework in light of CRNP effective depth variation has been also underlined via the merging framework.

• 한국소음진동공학회논문집
• /
• 제12권10호
• /
• pp.773-784
• /
• 2002

This paper proposes an optimal design to improve the performance of the intake system by reducing the noise. We adapt the Taguchi method and column merging method for the above design. At the first stage of the design, the length and radius of each component of the current intake system are selected as control factors. Then the $L^{18}$ table of orthogonal array is used to get the effective main factors. At the second stage, the $L^{16}$ table of orthogonal array and the column merging method is combined to analyze subdivided significant factors. We know that the robust design with the column merging method provides better design for noise of intake system than the robust design itself.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.32-33
• /
• 2006

현재 변전소 자동화의 국제 표준으로 대두되고 있는 IEC61850은 스테이션 버스뿐만 아니라 프로세서 버스까지도 표준화된 통신기술을 채용하였고 자동화에 필요한 모델을 제시하였다. 본 연구에서는 프로세서 버스의 대표적인 장비인 Merging Unit의 특성과 구현에 필요한 기술을 고찰하였다. 특히 정밀한 시간동기에 필요한 GPS(Global Positioning System)를 이용한 동기화 기술에 대하여 고찰하였다. 이와 더불어 IEC61850-9-2 SV(Sampled Value) 서비스를 분석하고 실제로 마이크로프로세서를 이용하여 Merging Unit에 대한 설계를 수행하였다. 제안된 Merging Unit의 성능을 검증하기 위해서 전송된 SV 데이터를 시간 정보를 기준으로 재구성할 수 있는 오실로그래피(Oscillography)를 위한 플레이백(Playback) 프로그램을 제작하였다.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.907-913
• /
• 1999

For an automated transportation system like PRT(Personal Rapid Transit) system or IVHS, an efficient vehicle-merging algorithm is required for smooth operation of the network. For management of merging, collision avoidance between vehicles, ride comfort, and the effect on traffic should be considered. This paper proposes an unmanned vehicle-merging algorithm that consists of two procedures. First, a longitudinal control algorithm is designed to keep a safe headway between vehicles in a single lane. Secondly, 'vacant slot and ghost vehicle' concept is introduced and a decision algorithm is designed to determine the sequence of vehicles entering a converging section considering energy consumption, ride comfort, and total traffic flow. The sequencing algorithm is based on fuzzy rules and the membership functions are determined first by an intuitive method and then trained by a learning method using a neural network. The vehicle-merging algorithm is shown to be effective through simulations based on a PRT model.

• 천문학회보
• /
• 제42권2호
• /
• pp.41.1-41.1
• /
• 2017

We present weak-lensing analysis of the merging galaxy cluster Abell 115 at z=0.197 based on Subaru i and V band images. As merging clusters often show, Abell 115's merging signatures include radio relics, double X-ray peaks, and large offsets between the cluster member galaxies and the X-ray distributions. A weak-lensing study provides underlying dark matter distribution, the key information to determine the complex merging scenario of the cluster. In this work, we present 2D mass reconstruction of the cluster, which reveals two distinct mass peaks consistent with galaxy distributions. We measure the first weak-lensing mass of each subcluster. Our weak-lensing total mass estimate is a few factors lower than the published dynamical mass obtained from velocity dispersion. This large mass discrepancy may be attributed to a significant departure from dynamical equilibrium. We also re-analyze the archival chandra data and find that the result is consistent with weak-lensing mass.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1752-1757
• /
• 2008

Simple and highly efficient droplet merging method is proposed, which enables two nanoliter or picoliter droplets to merge regularly in a straight microchannel. We observe that two droplets of the same size but of different viscosities are merged by velocity difference induced as they are transported with the carrier fluid. To make viscosity difference, the mass ratio of water and glycerol is varied. Two droplets of the same size or of different sizes are generated alternatingly in the cross channel by controlling flowrates. This droplet merging method can be used to mix or encapsulate one target sample with another material, so that it can be applied to cell lysis, particle synthesis, drug discovery, hydrogel-bead production, and so on.

• 경영과정보연구
• /
• 제6권
• /
• pp.117-135
• /
• 2001

This study investigates whether the post-merger bad performance of merging firms was caused by the increase of cost and which cost is responsible for that, if it were. To do this, it is investigated whether there is any difference in terms of cost between pre-merger versus post-merger firms. Also the comparison of cost is used between merging firms and non-merging control groups. The finding is that the merging firms have a bigger cost than the non-merging control group and the post-merger firms have a bigger cost than the pre-merger firms. Especially labor cost to revenue and depreciation cost to revenue are statistically very different among them. Thus it is suggested that there are inefficiency of manpower and assets.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.827-828
• /
• 2006

This paper presents a vehicle control algorithm for Personal Rapid Transit (PRT) system. PRT system is a one-way direction network system which is composed of guideway branches, merging/diverging points. Vehicle control algorithm can be divided into two kinds. Those are merging control algorithm and the other. We emphasized on the merging control algorithm. For that, we first devised a front/virtual front vehicle finding strategies. Properly determined front/virtual front vehicle is the starting point of vehicle control. The objects of merging control are to avoid collision and to pass the merging point fluently. Which implies that jerk constraint and limits of acceleration and deceleration etc. are should be considered. To verify the validation of the vehicle algorithm, we executed simulations and presented test results.