• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.426-429
• /
• 2003

In this study, phase transformation characteristics of Nitinol shape memory alloy with 54.5wt%Ni-45.5wt%Ti were investigated by varying with annealing treatment and cutting conditions through DSC(differential scanning calorimetry). Annealing treatment conditions were considered as heat treated time of 5 min, 15 min, 30 min, and 45 min, heat treated temperature of 40$0^{\circ}C$, 50$0^{\circ}C$, 5$25^{\circ}C$, 55$0^{\circ}C$, 575$^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$, 80$0^{\circ}C$, and 90$0^{\circ}C$, and environmental condition of heat treatment under vacuum or air. Cutting conditions were considered as no cutting, one side cutting, and two side cutting. Tensile test was also conducted on Nitinol shape memory alloy to investigate thermomechanical characteristics by varying with annealing heat treatment histories. According to the results, annealing treatment and cutting conditions were found to significantly affect on phase transformation and thermomechanical characteristics of Nitinol shape memory alloy.

• Transactions of Materials Processing
• /
• v.18 no.1
• /
• pp.45-51
• /
• 2009

Shape memory alloy has been used to improve the tensile strength of composite by the occurrence of compressive residual stress in matrix using its shape memory effect. In order to fabricate shape memory alloy composite, TiNi alloy fiber and Al2024 sheets were used as reinforcing material and matrix, respectively. In this study, TiNi/Al2024 shape memory alloy composite was made by using hot press method. In order to investigate bonding condition between TiNi reinforcement and Al matrix, the micro-structure of interface was observed by using optical microscope and diffusion layer of interface was measured by using Electron Probe Micro Analyser. And the mechanical properties of composite with three parameters(volume fraction of fiber, cold rolling amount and test temperature) were obtained by tensile test. The most optimum bonding condition for fabrication the TiNi/Al2024 composite material was obtained as holding for 30min. under the pressure of 60MPa at 793K. The strength of composite material increased considerably with the volume fraction of fiber up to 7.0%. And the tensile strength of this composite increased with the reduction ratio and it also depends on the volume fraction of fiber.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.2
• /
• pp.467-479
• /
• 2022

Working memory (WM), which plays a vital role in daily activities, is a memory system that temporarily stores and processes information when people are engaged in complex cognitive activities. The influence of music on WM has been widely studied. In this work, we conducted a series of n-back memory experiments with different task difficulties and multiple trials on 14 subjects under the condition of no music and Alpha wave leading music. The analysis of behavioral data show that the change of music condition has significant effect on the accuracy and time of memory reaction (p<0.01), both of which are improved after the stimulation of Alpha wave music. Behavioral results also suggest that short-term training has no significant impact on working memory. In the further analysis of electrophysiology (EEG) data recorded in the experiment, auto-regressive (AR) model is employed to extract features, after which an average classification accuracy of 82.9% is achieved with support vector machine (SVM) classifier in distinguishing between before and after WM enhancement. The above findings indicate that Alpha wave leading music can improve WM, and the combination of AR model and SVM classifier is effective in detecting the brain activity changes resulting from music stimulation.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.706-709
• /
• 2004

A numerical method was developed that imposes constraint condition on the order parameters in martensitic phase transformation. In the method, an amplitude function having values of 1 or 0 was multiplied to transformation rates. The merit of the method is that the imposition of the constraint condition is more straightforward than a method with Lagrangian multiplier and easy to implement in the tangent modulus method. The developed method is applied to three-dimensional finite element analyses of single and poly crystalline shape memory alloys.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1985-1987
• /
• 1996

Shape memory alloy springs have been fabricated and annealed at $400^{\circ}C$, $450^{\circ}C$ and $500^{\circ}C$ in atmosphere and in nitrogen gas. The optimal heat treatment condition in view of maximum generated force has been decided by the iso-thermal test with variation of annealing condition. Experimental results show that the heat treatment with high temperature in nitrogen gas is desirable for high generated force and can be used for the design of shape memory alloy springs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.751-754
• /
• 2000

When charge-trap SONOS cells are used flash memory, the tunneling program/erase condition to minimize the generation of interface traps was investigated. SONOSFET NVSM cells were fabricated using 0.35$\mu\textrm{m}$ standard memory cell embedded logic process including the ONO cell process. based on retrograde twin-well, single-poly, single metal CMOS process. The thickness of ONO triple-dielectric for memory cell is tunnel oxide of 24${\AA}$, nitride of 74 ${\AA}$, blocking oxide of 25 ${\AA}$, respectively. The program mode(Vg: 7,8,9 V, Vs/Vd: -3 V, Vb: floating) and the erase mode(Vg: -4,-5,-6 V, Vs/Vd: floating, Vb: 3V) by modified Fowler-Nordheim(MFN) tunneling were used. The proposed programming condition for the flash memory of SONOSFET NVSM cells showed less degradation($\Delta$Vth, S, Gm) characteristics than channel MFN tunneling operation. Also the program inhibit conditions of unselected cell for separated source lines NOR-tyupe flash memory application were investigated. we demonstrated that the program disturb phenomenon did not occur at source/drain voltage of 1 V∼4 V and gate voltage of 0 V∼4.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.1
• /
• pp.43-49
• /
• 2003

In this study, micro electrochemical machining method was introduced for accomplishment the fabrication technology of functional parts and smart structures using the Ni-Ti shape memory alloy. From the experimental result, the micro part which has very fine surface could be achieved by use of micro electrochemical process with point electrode method. Concretely, the optimal performance of micro electrochemical process in Ni-Ti SMA was obtained at the condition of approximately 100% of current efficiency and high frequency pulse current. That is, much finer surface integrity and shape memory effect can be obtained at the same condition mentioned above.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.179-186
• /
• 2007

The decrease of masticatory function caused by tooth loss leads to a decrease of cerebral blood flow volume resulting in impairment of cognitive function and learning memory disorder. However, the reduced mastication-mediated morphological alteration in the central nervous system (CNS) responsible for senile deficit of cognition, learning and memory has not been well documented. In this study, the effect of the loss of the molar teeth (molarless condition) on the hippocampal expression of glial fibrillary acidic protein (GFAP) protein was studied by immunohistochemical techniques. The results were as follows : 1. The molarless mice showed a lower density of pyramidal cells in the cornu ammonis 1 (CA1) and dentate gyrus (DG) region of the hippocampus than control mice. 2. Immunohistochemical analysis showed that the molarless condition enhanced the time-dependent increase in the cell density and hypertrophy of GFAP immunoreactivity in the CA1 region of the hippocampus. The molarless condition enhanced an time-dependent decrease in the number of neurons in the hippocampal formation and the time-dependent increase in the number and hypertrophy of GFAP-labeled cells in the same region. The data suggest a possible link between reduced mastication and histological changes in hippocampal formation that may be one risk factor for senile impairment of cognitive function and spatial learning memory.

• Physical Therapy Korea
• /
• v.12 no.3
• /
• pp.67-73
• /
• 2005

Prospective memory (PM) is related to remember to carry out a previously intented behaviour. The purpose of this study was to develop a paradigm for measuring PM function to diagnosis in mild cognitive impairment 1 or brain injury in patients 2. among brain injured patients Thirty-eight normal healthy subjects participated in current study. The paradigm was composed of four conditions: a baseline and three intention conditions (expectation, execution 1 and 2). In the expectation condition, subjects were asked to make a new response to intented stimuli during ongoing task, but the intented stimuli never occurred. In the execution 1 (one type of expected stimulus) and 2 (two types of expected stimuli), the intended stimuli did occur in 20% of trials. The reaction time and error rate were calculated in each condition. Repeated measures using ANOVA of subject's mean reaction times (RTs) and mean error rates (ERs) showed main effects of conditions during ongoing task. The comparison of PM tasks in executive condition 1 and 2 also showed significance in RTs and ERs. This paradigm reflects sufficiently the performance of prospective memory function during ongoing task in normal individuals. Thus, we suggest that the paradigm will be helpful to study neural network of PM function using brain imaging techniques and diagnosis of PM dysfunction.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1137-1138
• /
• 2011

This paper deals with the PM performance evaluations in a pole changing memory motor (PCMM) using a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of permanent magnets. The focus of this paper is the characteristics evaluation relative to magnetizing direction and the pole number of machine on re-, demagnetization condition in a pole changing memory motor.