• Membrane Journal
• /
• v.22 no.6
• /
• pp.404-414
• /
• 2012

In order to investigate $SO_2$ removal, PEI hollow fiber membranes were produced by a dry-wet phase inversion method. The membrane support layer on surface was coated with PEBAX1657$^{(R)}$ and PEG blending materials. Modules were prepared for the single gas permeation characteristics of composite membrane according to temperature and pressure. As a result, $SO_2$ permeance and $SO_2/N_2$ selectivity were 220~1220 GPU and 100~506 through operating condition, respectively. Moreover, $SO_2/CO_2/N_2$ mixture gas was used to compare the performance of separation properties according to temperature, pressure and retentate flow rate difference. $SO_2$ removal efficiency was increased with pressure and temperature.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.319-328
• /
• 1994

Aluminium and titanium precursors containing $\beta$-diketonate ligands were used for the synthesis of polymeric sols of alumina and titania by sol-gel methods. To prepare polymeric sols by solgel processing, we synthesized modified precursors having chelating organic ligands. With these precursors it was found to be possible to control both hydrolysis and polycondensation reaction rates which resulted in ultrafine particles few nms of average size. The optimum molar ratio of acid to alkoxide for alumina sol was 0.3-0.4 and that of water to alkoxide &as 1. On the other hand, the corresponding ratios for titania sol were found be 0.25-0.20 and 1 respectively. Dynamic light scattering measurements indicated that the average particle size in both sols was in the order of few nms. SEM photographs were taken to observe crack-free and smooth surfaces of coated membranes after sintering at $450^{\circ}C$. Alumina coated membrane on a slide glass had about 4-4.5$\mu \textrm{m}$, thickness and titania coated one had 2-2.5$\mu \textrm{m}$, thickness. And according to TEM photographs, the grain size of titania was smaller than 30nm and that of alumina was in the range of few $\AA$s to 2nms. An X-ray diffraction study revealed that alumina was $\gamma$ phase and titania was anatase crystal.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.137-144
• /
• 2005

Silica in primary system combines with an alkali grammatical particle metal and forms the zeolite layer which is hindering the heat transfer on the surface of the cladding. Zeolite layer becomes the cause of the damage in this way. The problems of the NPP's primary system have been issued steadily by EPRI. Through a series of experiments of the laboratory scale, we confirmed the applicability of NF membrane for silica removal, as silica rejection rate of NF membrane is about $60\;{\sim}\;70\%$ and boron rejection rate is about $10\;{\sim}\;20\%$. We accomplished a site experiment about four NF membranes manufactured by FilmTec and Osmonics Inc. In experiment using 400L of SFP water, when operation pressure is $10kg_{f}/cm^2$, we confirmed that the silica rejection rate of NF90-2540 manufactured by FilmTec Inc. is about $98\%$, boron rejection rate is about $43\%$. The silica rejection rate of NF270-2540 is about $38\%$, boron rejection rate is about $3.5\%$. Afterward, through additional experiments, such as long term characteristic experiments, we are going to design a optimum NF membrane system for silica removal.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.101-109
• /
• 2005

In order to produce only a pH-controlled solution without discharging any unused solution, this work has developed a continuous electrolytic system with a pH-adjustment reservoir being placed before an ion exchange membrane-equipped electrolyzer, where as a target solution was fed into the pH-adjustment reservoir, some portion of the solution in the pH-adjustment reservoir was circulated through the cathodic or anodic chamber of the electrolyzer depending on the type of the ion exchange membrane used, and some other portion of the solution in the pH-adjustment reservoir was discharged from the electrolytic system through other counter chamber with its pH being controlled as acid or base. The phenomena of the pH being controlled in the system could be explained by the electro-migration of the ion species in the solution through the ion exchange membrane under a cell potential difference between anode and cathode and its consequently-occurring non-charge equilibriums and electrolytic water- split reactions in the anodic and cathodic chambers.

• Applied Microscopy
• /
• v.27 no.3
• /
• pp.225-234
• /
• 1997

Vincristine, a kind of anticancerous drugs, interferes with development of microtubles and synthesis of nucleic acid and proteins in cells, and destructs cytoplasmic membrane so that mitosis of cancer cells is inhibited. Unfortunately these anticancerous effects by vioneristime are not limited to specific cancer cells, so several side effects are produced. This study was performed to explore the effects of vincristine on the fine structure of cytoplasmic organelles and cartilagenous matrix in proximal epiphyseal plate of the tibia in rat. The results were as follows: 1. Cisternae of rough endoplasmic reticulum (RER) were fragmented and sacculated, and membrane-bound ribocomes of RER were detached at 3 and 6 hours after vincristine treatment. Severely dilated, fagmented and sacculated cisternae of RER were found at 12 hours after vincristine treatment, and at 24 hours after vincristine treatment a few cisternae were framented and sacculated. At 72 hours after vincristine treatment cisternae of RER were parallely well arraged. 2. Golgi complex was atrophied at 3, 6, and 12 hours after vincristine treatment, while at 72 hours after vincristine treatment the cisternae of Golgi complex were made of 5-6 layers. 3. Mitochondria with disorganized mitochondrial cristae and outer membrane-losed mitochondria were found at 3 hours after vincristine treatment. At 6 and 12 hours after vincristine treatment mitochondria had possessed disorganized cristae, and a few mitochondria with disorganized cristae were. observed at 24 hours after vincristine treatment. While at 72 hours after vincristine treatment mitochondria were shown distinct cristae and double membranes. 4. Phagosome were begun to observe at 3 hourse after vincristine treatment, and at 24 hourse after vincristine treatment many phagosomes were found, while at 72 hours after vincristine treatment a few phagosomes were observed. 5. In the cartilagenous matrix large-sized matrix granules were decreased and collagen fibrils were dispersed at 3, 6, and 12 hours after vincristine treatment, while at 72 hours after vincristine treatment many large-sized matrix granules and numerous matrix it is suggested that although vincristine may induce the degenerative changes of the chondrocyte, resulting in changes of components of the cartilagenous matirx, these toxic effects may be regressed with time.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.437-450
• /
• 1999

Bile canaliculi are the structure delivering bile secreted by hepatocytes into the bile passage. Bile secretion is mainly controlled by the cytoskeletal elements, mainly of actin in the microvilli, pericanalicular web. Most studies on the bile secretion have been done in viva situation, however, to control the various parameters in vitro culture system seem to be more useful. To set up an in vitro experimental system, the investigator isolated hepatocytes with an enzymatic method using a mixture of collagenase and hyaluronidase from normal Sprague-Dawley rat liver and cultured. Isolated hepatocytes were round and formed cords in culture. Microvilli covered the whole surface of hepatocytes. Bile canaliculi were formed between hepatocytes and were characterized by the presence of microvilli of various lengths and shapes mainly arising from small surface mounds. Actin filament core in the microvilli and pericanalicular actin web were incomplete. After cytochalasin D treatment, cultured hepatocytes were round but the surface were irregular with surfacen blebs, folds and grooves. Microvilli on the surface were scarce. Bile canaliculi were markedly dilated often with the detached junctional complexes. Bile canaliculi lacks microvilli almost completely and extended into the pericanalirular cytoplasm showing complex vacuolar and tubular structures by transmission electron mciroscopy. Pericanalicular actin web, intermediate filaments were hardly identified. Subsurface actin filaments were scattered scarcely under the cell membranes. These results suggest that hepatocytes isolated from rats can survive and form bile canaliculi in culture and the actin filaments are involved in the formation and/or maintenance of the bile canaliculi.

• Applied Microscopy
• /
• v.41 no.4
• /
• pp.229-234
• /
• 2011

The occurrence of nuclear inclusions has been reported in various plant groups from primitive ferns to higher flowering plants. Their presence within a group seems to be randomly distributed without any phylogenetic relationships among species. According to the current survey, nuclear inclusions have been widely documented in more than several hundreds of species from various families of plants. The morphology and internal structures of nuclear inclusions are diverse and at least five types of inclusions develop within plant nuclei; amorphous, crystalline, fibrous, lamellar, and tubular form. Among these types, crystalline inclusions are the ones that are the most frequently reported. The inclusions are not bound by membranes and appear to be related to the nucleoli, either spatially by a close association or by an inverse relationship in size during development. The idea that nuclear inclusions are of a proteinaceous nature has been widely accepted. Further link to nucleolar activity as a protein storing site has also been suggested based on the association between the nucleolus and nuclear inclusions. Various investigations of nuclear inclusions have revealed more information about their structural features, but characterizing their precise function and subunit complexity employing molecular analysis and 3-D reconstruction remains to be elucidated. Tilting and tomography of serial sections with appropriate image processing can provide valuable information on their subunit(s). The present review summarizes discussion about different nuclear inclusions in plants from previous works, giving special attention to their fine, ultrastructural morphology, function, and origin.

• Applied Microscopy
• /
• v.39 no.1
• /
• pp.65-72
• /
• 2009

Cryo-SEM which enables specimens to be observed in frozen form has been used to study liquid specimens in their native states. Cryo-methods, sample preparation for cryo-SEM, are quite complex and involve several discrete but vitally interconnected steps which are rapid cooling, fracturing, sectioning, etching and coating. It is important to select practical techniques and to optimize conditions of each steps considering analytic purpose and specimen characters, viz., sample dimension, water contents. In this study, etching methods and sample preparation before freezing had been studied for observation of cyanobacteria, Synechocystis sp. PCC 6803 using cryo-SEM and their cryo-SEM images were compared to Conventional SEM (CSEM) images treated by chemical fixation. We could observe the improved morphological images of the pili of the surface and membranes of Synechocystis sp. PCC 6803 and the three-dimensional architectures of their biofilm, which were difficult to observe using chemical fixation and CSEM. These results suggest that cryo-methods/cryo-SEM are useful techniques for morphological study of biological specimen.

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.125-133
• /
• 2008

Cytochrome-c-oxidase in mitochondria membrane is one of the most important factors for energy generation in the cell. As well as it is electron transfer enzyme, it is also heavily related to the apoptosis and other pathologic conditions. Meanwhile, porin is a protein located in inner and outer membranes of mitochondria, which is assumed to be functionally correlated with cytochrome-c-oxidase. It functions as forming electron transfer chain and conveying ATP. Therefore, using the immune-microscopy, It compared the distribution of cytochrome-c-oxidase and porin to figure out the formation and changes on cytochrome-c-oxidase in mitochondrial cristae. The sarcroplasm of cardic muscle tissue has many mitochondria. They are classified into two groups: the mitochondria with many cytochrome-c-oxidase and the mitochondria with only porins. The mitochondria with porins had few cytochrome-c-oxidases in their membrane; in contrast, the other mitochondria with rich cytochrome-c-oxidase had few porins in their walls. In addition, according to the location of the tissue in bovine heart, distribution of those kind of mitochondria had been clearly separated. As a result, it could be assumed that immature mitochondria has many porins to transfer the protein materials from sarcroplasm through the porins, and they made cytochrome-c-oxidase until it is enough, and then they decreased the porin and maintained minimum number of the porin.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.145-150
• /
• 2008

In this work we have studied the antifouling properties of the hydrophobic sol-gel modified sensing membrane and its optical properties for sensor application. E. coli JM109, B. cereus 318 and P. pastoris X-33 were cultivated in confocal cultivation dishes with glass surface, respectively. The glass surface was coated with the hydrophobic sol-gels prepared by the dimethoxy-dimethyl-silane (DiMe-DMOS) and tetramethyl-orthosilicate (TMOS). After cultivation, microorganisms adhered on the surface coated with sol-gels and glass surface were dyed by gram-staining method and the numbers of microorganisms were analyzed based on the image data of the scanning electronic microscope (SEM). A great number of microorganisms, about $2{\sim}3{\times}10^4/mm^2$, was adhered on the glass surfaces which no hydrophobic sol-gels were coated. But, the antifouling effect of the hydrophobic sol-gels was large, that microorganisms of less than $200{\sim}300/mm^2$ were adhered on the coated glass surface. The performance of the sensing membranes for detection of pH and dissolved oxygen was enhanced by recoating the light insulation layer prepared with the mixture of the hydrophobic sol-gel and graphite particles.