• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.37-47
• /
• 1993

최근에 치명적인 바이러스, 특히 에이즈를 이르키는 Human Immunodificiency Virus (HIV), 또는 간에 심각한 병을 이르키는 Hepatitis B Virus (HBV)와 같은 무서운 바이러스가 환자의 피나 분비물을 통하여 의사에게 전염되는 사례가 늘어감에 따라 이제는 환자의 피나 분비물의 침투를 막기 위해 방수성과 방균성을 가진 수술복 착용이 절대적으로 필요하게 되었다. 따라서 본 연구의 목적은 1. 수술가운을 만드는 5가지 대표적인 직물의 방수성과 방균성을 측정하고 2. 세탁시 표백제의 사용유무가 그 직물의 방수성과 방균성에 미치는 영향을 알아보고 3. 반복세탁이 그 직물의 방수성과 방균성에 미치는 영향을 알아 보는데 있다. 이 실험을 위해 3가지 재사용 수술가운과 (Gore-tex$^R$, membrane reinforced; Compel$^{TM}$, fabric reinforced; Acep$^{TM}$, non-reinforced) 두 가지 일회용 가운 (Evolution$^R$ gown, fabric reinforced; Evolution$^R$ Specialty, film reinforced)이 사용되었다. 표백제를 사용한 세탁이 직물의 방수성과 방균성에 미치는 영향을 알아보기 위해 재사용 가운을 세탁, 건조, 살균을 하였다. 세탁과 살균의 빈도수는 1, 20, 40, 50, 60, 70, 80번 이였다. 방수성 측정방법으로 1. Impact Penetration test (AATCC 42-1985), 2. Elbow Lean test, 3. Synthetic Blood Resistance test (ASTM F 23. 40. 01)가 사용되었고 방균성 측정방법으로 Viral Resistance test (ASTM F 23. 40. 02)가 사용되었다. 실험 결과는 다음과 같다. 1. Gore-Tex$^R$ 가운과 Evolution$^R$ Specialty 가운은 방수성과 방균성의 성질을 가졌다. 그러나 표백제를 사용하여 70번 세탁한 Gore-Tex$^R$ 가운은 membrane의 구조가 파괴되어서 방균성을 상실했다. 2. Evolution$^R$ 가운, Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 오직 Impact Penetration test만 통과했다. 즉 이 직물들은 큰 압력의 가함이 없는 splash resistance만 가지고있다. 그러나 Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 20번과 60번 세탁 후 각각 그들의 splash resistance 마져도 상실했다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2079-2084
• /
• 2003

In biological cell manipulation, manual thrust or penetration of an injection pipette into an embryo cell is currently performed by a skilled operator, relying on visual feedback information only. Accurately measuring cellular forces is a requirement for minimally invasive cell injections. Moreover, the cellular force sensing is essential in investigating the biophysical properties for cell injury and membrane modeling studies. This paper presents cellular force measurements for the force feedback-based biomanipulation. Cellular force measurement system using piezoelectric polymer sensor is implemented to measure the penetration force of a zebrafish egg cell. First, measurement system setup and calibration are described. Second, the force feedback-based biomanipulation is experimentally carried out. Experimental results show that it successfully supplies real-time cellular force feedback to the operator at tens of uN and thus plays a main role in improving the reliability of biological cell injection tasks.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.237-240
• /
• 2003

In biological cell manipulation, manual thrust or penetration of an injection pipette into an embryo cell is currently performed by a skilled operator, relying on visual feedback information only. Accurately measuring cellular forces is a requirement for minimally invasive cell injections. Moreover, the cellular farce sensing is essential in investigating the biophysical properties for cell injury and membrane modeling studies. This paper presents cellular force measurements for the force feedback-based biomanipulation. Cellular force measurement system using piezoelectric polymer sensor is implemented to measure the penetration force of a zebrafish egg cell. First, measurement system setup and calibration are described. Second, the force feedback-based biomanipulation is experimentally carried out. Experimental results show that it successfully supplies real-time cellular force feedback to the operator at several tens of uN and thus plays a main role in improving the reliability of biological cell injection tasks.

• Archives of Pharmacal Research
• /
• v.29 no.10
• /
• pp.928-933
• /
• 2006

Percutaneous delivery of NSAIDs has advantages of avoiding hepatic first pass effect and delivering the drug for extended period of time at a sustained, concentrated level at the inflammation site that mainly acts at the joint and the related regions. To develop the new topical formulations of pranoprofen that have suitable bioadhesion, the gel was formulated using hydroxypropyl methylcellulose (HPMC) and poloxamer 407. The effects of temperature on drug release was performed at $32^{\circ}C$, $37^{\circ}C$ and $42^{\circ}C$ according to drug concentration of 0.04%, 0.08%, 0.12%, 0.16%, and 0.2% (w/w) using synthetic cellulose membrane at $37{\pm}0.5^{\circ}C$. The increase of temperature showed the increased drug release. The activation energy (Ea), which were calculated from the slope of lop P versus 1000/T plots was 11.22 kcal/ mol for 0.04%, 10.79 kcal/mol for 0.08%, 10.41 kcal/mol for 0.12% and 8.88 kcal/mol for 0.16% loading dose from the pranoprofen gel. To increase the drug permeation, some kinds of penetration enhancers such as the ethylene glycols, the propylene glycols, the glycerides, the non-ionic surfactants and the fatty acids were incorporated in the gel formulation. Among the various enhancers used, propylene glycol mono laurate showed the highest enhancing effects with the enhancement factor of 2.74. The results of this study suggest that development of topical gel formulation of pranoprofen containing an enhancer is feasible.

• Geomechanics and Engineering
• /
• v.2 no.3
• /
• pp.177-190
• /
• 2010

This paper presents the details of indigenous development of the piezovibrocone and calibration chamber. The developed cone has a cylindrical friction sleeve of $150cm^2$ surface area, capped with a $60^{\circ}$ apex angle conical tip of $15cm^2$ cross sectional area. It has a hydraulic shaker, coupled to the cone penetrometer with a linear displacement unit. The hydraulic shaker can produce cyclic load in different types of wave forms (sine, Hover sine, triangular, rectangular and external wave) at a range of frequency 1-10 Hz with maximum amplitude of 10 cm. The piezovibrocone can be driven at the standard rate of 2 cm/sec using a loading unit of 10 ton capacity. The calibration chamber is of size $2m{\times}2m{\times}2m$. The sides of the chamber and the top as well as the bottom portions are rigid. It has a provision to apply confining pressure (to a maximum value of $4kg/cm^2$) through the flexible rubber membrane inlined with the side walls of the calibration chamber. The preliminary static as well as dynamic cone penetration tests have been done sand in the calibration chamber. From the experimental results, an attempt has been made to classify the soil based on friction ratio ($f_R$) and the cone tip resistance ($q_c$).

• The Korean Journal of Pain
• /
• v.6 no.1
• /
• pp.74-82
• /
• 1993

신선한 소의 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리하고 이 SPMV로부터 추출한 총지질(cholesterol과 각종 인지질 함유)로서 제제한 인공세포막(SPMVTL)에서의 n-alkanols 침투 정도를 형광 probe를 이용한 형광 소광법을 통하여 검색하였다. n-alkanols는 SPMVTL 외부 단층(outer monolayer)의 표면에 주로 분포하되 그 탄소수에 비례하여 소수성 부위에 분포되는 양이 증가되는 경향을 나타내었다(1-decanol은 예외). Methanol, ethanol, 1-propanol, 1-butanol, 1-pentanol, 1-hexanol, 1-hepatnol, 1-cotanol, 1-nonanol 및 1-decanol은 SPMVTL 외부 단층 표면(친수성 부위)에 분포되는 것이 소수성 부위에 분포되는 것에 비하여 각각 650, 288, 151.6, 69.5, 36.8, 11.9, 4.8, 1.6, 0.74, 2.1배가 된다는 것을 확인하였다. 1-decanol은 $C_{10}$인데도 불구하고 $C_8$인 1-octanol에 비하여 적은 양이 소수성 부위에 침투 분포되는 것이 확인되었다. 또한 n-alkanols는 저자등이 이미 보고한 SPMV에서의 경우보다도 본 연구에서의 SPMVTL의 경우가 현저하게 많은 양이 소수성 부위로 침투 분포된다는 것이 확인되었다.

• The Korean Journal of Pain
• /
• v.6 no.1
• /
• pp.67-73
• /
• 1993

소의 신선한 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리한 후 이 SPMV로부터 추출한 모든 인지질들로서 제제한 인공세포막(SPMVPL)에서의 n-alkanols 침투 정도를 형광 probe를 이용한 형광 소광법을 통하여 검색하였다. n-alkanols는 SPMVPL 외부 단층(outer monolayer)의 표면에 주로 분포하되 그 탄소수에 비례하여 소수성 부위에 분포되는 양이 증가되는 경향을 나타내었다. methanol, ethanol, 1-propano, 1-butanol, 1-pentanol, 1-hexanol, 1-heptanol, 1-octanol, 1-nonanol 및 1-decanol은 SPMVPL 외부 단층의 표면(친수성 부위)에 분포되는 것이 소수성 부위에 분포되는 것에 비하여 각각 432.4, 208.9. 125.6, 88.2, 19.3, 7.9, 2.6, 1.0, 0.42, 1.36배가 되었다. 1-decanol은 $C_{10}$인데도 불구하고 $C_8$인 1-octanol에 비하여 적은 양이 소수성 부위에 침투 분포된다는 것이 확인되었다. n-alkanols의 침투에 대하여 저자등이 이미 보고한 바 있는 SPMV 및 SPMVTL(cholesterol+phospholipids)의 경우보다도 본 연구에서의 SPMVPL의 경우가 현저하게 많은 양이 소수성 부위로 침투 분포된다는 것도 확인되었다.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.187-193
• /
• 2010

Chromium nitride (CrN) samples with two different layer structures (multilayer and single layer) were coated on bipolar plates of polymer electrolyte membrane fuel cells (PEMFC) using the reactive sputtering method. The effects with respect to layer structure on corrosion resistance and overall cell performance were investigated. A continuous and thin chromium nitride layer ($Cr_{0.48}\;N_{0.52}$) was formed on the surface of the SUS 316L when the nitrogen flow rate was 10 sccm. The electrochemical stability of the coated layers was examined using the potentiodynamic and potentiostatic methods in the simulated corrosive circumstances of the PEMFC under $80^{\circ}C$. Interfacial contact resistance (ICR) between the CrN coated sample and the gas diffusion layer was measured by using Wang's method. A single cell performance test was also conducted. The test results showed that CrN coated SUS316L with multilayer structure had excellent corrosion resistance compared to single layer structures and single cell performance results with $25\;cm^2$ in effective area also showed the same tendency. The difference of the electrochemical properties between the single and multilayer samples was attributed to the Cr interlayer layer, which improved the corrosion resistance. Because the coating layer was damaged by pinholes, the Cr layer prevented the penetration of corrosive media into the substrate. Therefore, the CrN with a multilayer structure is an effective coating method to increase the corrosion resistance and to decrease the ICR for metallic bipolar plates in PEMFC.

• The Korean Journal of Pharmacology
• /
• v.31 no.3
• /
• pp.271-278
• /
• 1995

The relative distribution ratio of barbiturates between hyarocarbon interior and surface region of outer monolayer of synaptosomal plasma membrane vesicles (RSPMV) isolated from rat whole brain was determined by employing the fluorescent probe technique. The two fluorescent probes N- octadecylnaphthyl-2-amine-6-sulfonic acid (ONS) and 12-(9-anthroyloxy) stearic acid (AS) were utilized as probes for hydrocarbon interior and surface of outer monolayer of RSPMV. respectively. The Stern-Volmer equation for fluorescent quenching was modified to calculate the relative distribution ratio. The analysis of preferential quenching of these probes by barbiturates indicates that pentobarbital, hexobarbital, amobarbital and phenobarbital are predominantly distributed on the surface region. whereas thiopental sodium has an accessibility to the hydrocarbon interior of the outer monolayer of the RSPMV. From these results, it is strongly suggested that the more effective penetration into the hydrocarbon interior of the outer monolayer of the membrane lipid bilayer could result in higher general anesthetic activity.

• Applied Chemistry for Engineering
• /
• v.28 no.2
• /
• pp.177-185
• /
• 2017

In the present work, the interaction of fatty acid with vesicle membrane of phospholipids was investigated using 3 different kinds of fatty acids such as stearic acid (SA), oleic acid (OA) and linoleic acid (LA). Basically, the same trend has been found in 3 fatty acid systems. The addition of fatty acid produced a close packing of liposome due to the penetration of fatty acid molecules into liposome vesicles, which resulted in a decrease in size and an increase in zeta potential of liposome. However, excessive addition of fatty acid produced a transition from liposomes to aggregates of lipid particles having polymorphic structure. The membrane fluidity, characterized by measuring membrane deformability and fluorescence anisotropy ratio of liposomes, was in good agreement with measurement results of transmission electron microscopy (TEM) and particle size. The minimum size and closest packing of liposome with SA, OA and LA were found when the molar ratios of fatty acid to lecithin were 0.70, 0.50, and 0.25 respectively.