• Computers and Concrete
• /
• 제33권2호
• /
• pp.217-240
• /
• 2024

The purpose of this study is to propose new hysteretic characteristics of medium- to low-rise RC structures controlled by both shear and flexure. Through previous study, the dual lateral force-resisting system composed of shear and flexural failure members has a new failure mechanism that cooperates to enhance the flexural capacity of the flexural failure member even after the failure of the shear member, and the existing theoretical equation significantly underestimates the ultimate strength. In this study, the residual lateral strength mechanism of the dual lateral force-resisting system was analyzed, and, as a result, an equation for estimating the residual flexural strength of each shear-failure member was proposed. The residual flexural strength of each shear-failure member was verified in comparison with the structural testing results obtained in previous study, and the proposed residual flexural strength equation for shear-failure members was tested for reliability using FEA, and its applicable range was also determined. In addition, restoring-force characteristics for evaluating the seismic performance of the dual lateral force-resisting system (nonlinear dynamic analysis), reflecting the proposed residual flexural strength equation, were proposed. Finally, the validity of the restoring-force characteristics of RC buildings equipped with the dual lateral force-resisting system proposed in the present study was verified by performing pseudo-dynamic testing and nonlinear dynamic analysis based on the proposed restoring-force characteristics. Based on this comparative analysis, the applicability of the proposed restoring-force characteristics was verified.

• 한국지진공학회논문집
• /
• 제9권3호
• /
• pp.51-58
• /
• 2005

최근 우리나라에서는 건축적 또는 사회적 요구로 비정형 고층 RC건물이 급증하고 있으나, 이와 같은 건물을 내진설계하는데 요구되는 지진의 방향성과 직교성을 적응하기 위한 구체적인 방법이 제시되어 있지 않아 설계자들이 설계하는데 어려움이 있다. 따라서, 본 논문에서는 우리나라에서 실제 건설된 비정형고층 RC건물을 스펙트럼해석법과 시간이력해석법에 따라 SAP2000을 사용하여 동적해석을 수행한 후, 하부골조 기둥의 설계력을 비교함으로써 주축의 설정과 지진의 방향성을 고려하는 것이 설계력에 미치는 영향, 그리고 방향성과 직교성을 모두 만족시킬 수 있는 방법에 대해 연구하였다. 연구결과 내린 결론은 다음과 같다. 1) 지진에 직각방향 전단력이 발생하지 않는 방향을 주축으로 정의하여 설계부재력을 구하면, 동적밑면전단력 보정계수가 감소하기 때문에 X, Y축을 주축으로 정하여 설계부재력 구하였을 때보다 설계부재력이 $15\%$정도 작은 값을 보여주었다. 2) 100/30법에 따라 방향성을 고려하여 구한 설계부재력은 2방향 시간이력해석결과로부터 구한 최대설계부재력보다 큰 값을 보여주어 100/30법에 따라 직교성을 고려하는 방법은 타당한 것으로 나타났으나, 시간이력해석결과에서 부재력을 나타내는 벡터$(P,\;M_y,\;and\;M_z)$ 많은 부분이 100/30법에 따라 예측한 설계부재력의 영역을 벗어났다.

• 한국공간구조학회논문집
• /
• 제5권3호
• /
• pp.91-100
• /
• 2005

본 연구는 구조물의 정량적 강성설계 기법 개발, 즉 부재 단위의 강성 재설계를 통한 전역 자유도 변위의 정량적 조절 기법개발을 궁극적 목적으로 한다. 이를 위하여 본 연구에서는 전역 자유도에 대한 부재의 변위기여도계수와 내력기여도계수를 유도하고, 이를 이용하여 특정 변위를 정량적으로 예측, 제어할 수 있도록 부재 강성과 특정 변위간의 상관식을 유도 제시하였다. 간단한 예제 구조물의 해석과 제안식 적용을 통한 변위 예측값 사이의 비교를 통하여 제안식을 검증하였다. 정정구조물의 경우 본 상관식은 정해로서, 이를 이용하여 폭정 변위를 원하는 목표치로 정확하게 제어할 수 있으며, 부정정구조물의 경우에도 부재 내력 재분배에 의한 오차가 발생하기는 함에도 불구하고 각 부재 강성과 특정 변위간의 상관성과 경향을 제시함으로써 매우 유용하게 활용될 수 있다. 본 연구에서 제안하는 정량적 변위 제어 기법은 강성설계가 전체 설계 결과를 지배하게 되는 대 공간구조물 또는 초고층건물의 설계 시 유용할 것으로 기대된다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.123-130
• /
• 2004

The recent large-spatial structures are frequently made from light-weight structural system and it has a good mechanical efficiency and uses new materials. The large space is made by light-weight structural system using tension members mainly, and generally it is called a soft structure. The cable dome structures which are a soft structures are very flexible, the stresses and nodal coordinates of other members are changed when we control the stress of one member. Therefore, we have to do two kind of works for effective and accurate construction of the cable dome structures. The first work is making a working scenario to complete the final objective form and the second is revising constructional errors occurred in process of the actual works. These works are called constructional analysis. At this time, we have to consider geometric nonlinearity to reflect the sensitivity by the initial stresses of cable dome structures, and constructional analysis comes down to a nonlinear problem after all. In this study, we try to approach the constructional analysis of the cable dome structures using the numerical method, and then verify it.

• Steel and Composite Structures
• /
• 제5권2_3호
• /
• pp.103-126
• /
• 2005

This paper describes the theoretical background and underlying principles behind the American Institute of Steel Construction Load and Resistance Factor Design (AISC LRFD) Specification for the analysis and stability design of steel frames. Various analysis procedures that can take into consideration the effects of member instability, frame instability, member-frame interaction, geometric imperfections, and inelasticity are reviewed. Design approaches by which these factors can be incorporated in the design of steel moment frames are addressed. Current specification guidelines for member and frame design in the U.S. are summarized. Examples are given to illustrate the validity of the design equations. Some future directions for the analysis and stability design of steel frames are discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2001

A lot of considerations on the spatting by fire of high performance concrete should be taken into for fire resistance of the concrete structures. In this paper, fire resistance of high performance concrete is described using polypropylene fiber, which is known to be contributed to fire resistance. Strength level and member size are varied with. According to test results, spatting by fire takes place more easily, as W/C increases and member size decreases. It shows that concrete containing polypropylene fiber has good effects on preventing spatting by fire. In case high performance concrete does not contain polypropylene fiber, residual strength shows to be decreased remarkably compared :o that of normal concrete. Whereas, in case 0.1% of polypropylene fiber contents, high performance concrete shows higher residual strength than that of normal concrete. As member size is smaller, residual strength shows to be decreased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.455-460
• /
• 2002

In this study, a numerical analysis that can effectively predict the effect of strengthening of cracked flexural members is developed using axial deformation link elements. Concrete and interface between concrete and repair material are considered as quasi-brittle material. Reinforcing bars and reinforcing steel plates are assumed to perform as elasto-plastic materials. Unloading behavior of axial deformation link element is implemented. In the developed numerical model, a flexural member is intentionally cracked by pre-loading, then, the cracked member is repaired using extra elements, and reloaded. The results from analysis of repaired flexural members agrees well with available experiment results. Also, it was shown that the effect of strengthening and the change of failure mode with respect to the time for strengthening and thickness of repair materials. Based on the results, it was determined that the developed numerical model has a good agreement for determining failure modes and effect of strengthening in cracked flexural members. By utilizing the developed numerical analysis, the time and dimension of external strengthening in an existing cracked flexural member with predition of failure mechanism can be determined.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.202-206
• /
• 2011

Works on the strength and stiffness in the structural members are carried out widely with various material and cross-sections with ever increasing safety concerns, they are presently applied in various fields including railroad trains, air crafts and automobiles. In addition to this, problem of lighting structural members became important subject by control of exhaust gas emission, fuel economy and energy efficiency. So, Light weight of member structures is necessary for the high performance and various functions. In this study, the CFRP flat and circular member was manufactured by CFRP prepreg sheet in autoclave. Carbon FRP is an anisotropy material whose mechanical properties change with its fiber orientation angle, so this study apply to the effects of the fiber orientation angle on the bending characteristics of the member. Each CFRP flat and circle are compared by strength and stiffness.

• 한국강구조학회 논문집
• /
• 제29권3호
• /
• pp.205-215
• /
• 2017

본 연구에서는 10MW급 풍력하중을 받는 멀티기둥 타워시스템에 원형강관 부재의 구조안전성 및 경제성을 함께 검토하는 방식으로 부재 유용도에 근거한 개념설계의 예를 보였다. 단일 실린더형 타워를 대체할 수 있는 멀티기둥타워 구조의 구성에 관한 기본적인 가정을 정립하였고, 그에 따라 제안된 구조물을 모델링하고 해석하여 부재력을 확인하였다. 산정된 부재강도와 작용하중을 근간으로 제안된 멀티기둥타워의 각 부재별로 축력, 전단, 휨, 비틂에 대한 유용도가 산정되었고, 풍력타워로서의 적합성이 평가하였다. 멀티기둥 풍력타워의 개념설계에 채택될 수 있는 수준의 유용도 범위에서 강관 치수, 세장비 및 수평재 단수 등의 설계 매개변수를 제안하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.168-169
• /
• 2015

SMART Frame is a composite precast concrete structure system to deliver the advantages of both steel frame and reinforced concrete. Many studies have established to date that SMART Frame is more advantageous than conventional frame-type structure in terms of structural stability, constructability, economic viability as well as reduction of construction schedule. However, such studies have focused primarily on wall-type or flat slab-type apartment housing structures, failing to include Rahmen structures in their scope. Accordingly, this study aims to analyze the benefits of potential application of SMART Frame to RC Rahmen structures. As the structural stability and constructability of SMART Frame is already proven, this study reviews its benefits from the perspective of cost reduction. Conclusion of this study will be used subsequently in predicting the benefits of SMART Frame when it is adapted to RC Rahmen structures.