• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.177-185
• /
• 2012

The interest to develop adhesives from renewable resources is growing to substitute petroleum-based adhesive resins in the manufacture of wood based panels. In our study, rapeseed flour (RSF), which is the by-product of bio-diesel produced from rapeseed, were hydrolyzed with acid and alkali. As a crosslinking agents of the RSF hydrolyzates, phenol-formaldehyde prepolymers (PF) were prepared. The RSF hydrolyzates and PF were mixed to complete the formulation of RSF-based adhesive resins, and the resins were applied to make the medium density fiberboard (MDF). The physical and mechanical properties of the MDF were measured to examine whether RSF can be used as raw materials of adhesive resins for the manufacture of MDF or not. The average moisture content and density of the MDF made with RSF-based adhesive resins satisfied the minimum requirement of KS standard, but the thickness swelling was not. The bending strengths of the MDF made with RSF-based adhesive resins were lower than that of the MDF made with commercial UF resins, but the internal bonding strengths of tested MDF in some make-up conditions of RSF-based adhesive resins were higher than that of MDF made with commercial UF resins. These results showed the potential of RSF as a raw material of adhesives for the production of MDF. Future works on the optimal manufacturing process conditions of MDF made with RSF-based adhesive resins are required to improve the performance of MDF made with RSF-based resins.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.417-422
• /
• 2003

Addition of whole soy flour(WSF) to wheat flour(WF) was studies for its effects on dough and noodle characteristics. The WF used was medium grade of strength and WSF was a fine flour of 350 mesh. The addition ratio of WSF to. n was up to 20%. The dough properties and textural properties of wet and cooked noodles were measured with using Farinograph, Amylograph and Rheometer. Farinogram data showed the minimum dough development time and stability at 6% addition of WSF. Amylograph data of initial pasting temperature and time were increased while the maximum and final viscosity and setback were decreased as the WSF added more to W The initial pasting temperature of 2.0∼6.0% WSF added flour were comparable to 100% WF eventhough viscosity was almost half of WF. The water absorption capacity was increased from 81.6% to 92.3% at 6.0% WSF and then decreased as the addition ratio of WSF increased. The extensibility of dough showed a maximal value at 8.0% WSF addition. Strengthness and hardness of wet and cooked noodle were increased to the heighest measurement as the WSF added up to 6.0% followed by a steady decrease thereafter. It was also found that WSF addition resulted an increase in adhesiveness of wet noodle and decrease in hardness and strengthness of cooked noodle.

• Microbiology and Biotechnology Letters
• /
• v.28 no.6
• /
• pp.341-348
• /
• 2000

Selection of high producer strain, optimization of production medium and cultivation in bioreactor system were carried out in order to produce an antifungal substance, PAFS in large amounts which sources and 41 kinds of nitrogen sources, a synthetic medium consisting of fructose(70 g/1) and ammonium sulfate (10g/l) and a complex medium including galactose(30g/l), fructose(20g/l) and cottonseed flour(35g/l) were determined as opti-mized media for PAFS production. In bioreactor studies examining physiological characteristics of the pro- ducer microorganism with the complex medium, typical pattern of diauxic growth was observed as demonstrated by the result that fructose was not used before almost exhaustion on readily utilizable carbon source, galactose. When galactose was supplemented additionally during the fermentation period. PAFS pro-ductivity did no increases any more, indicating that large portion of the added galactose was used for cell growth instead of biosynthesis of the secondary metabolite. It was deduced that PAFS production could be enhananced by employing fed-batch operation in order to overcome the apparent phenomenon of catabolite repression and /or inhibition.

• Microbiology and Biotechnology Letters
• /
• v.6 no.3
• /
• pp.103-108
• /
• 1978

Improvement of fermentation medium for chlortetracycline production was attempted. Starch was a good carbon source for chiortetracycline production as compared with sucrose or glucose, although the cell yield from the starch medium was somewhat lower, and complexed natural medium was more suitable than artificial and simple one for this purpose. The concentrations of divalent ions, such as $Mg^{2+}$, M $n^{2+}$, Z $n^{2+}$, and F $e^{2+}$, affected the productivity of chlortetracycline. These mineral ions in excess of which was contained in natural medium such as corn flour and corn steep liquor, caused significant decrease in the productivity of chlortetracycline.cline.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.440-444
• /
• 1999

For the effecient production of clavulanic acid., a mutant strain Streptomyces clavuligerus KK was selected from Streptomyces clavuligerus ATCC 27064 through mutation with NTG. S. clavuligerus ATCC 27064 produced about 200 mg/L of calvulanic acid when the medium was composed of 1%(W/V) glycerol, 1.5%(W/V) soybean flour, 0.1%(W/V) $KH_2PO_4$, 0.2%(V/V) soybean oil. A selected mutant, S. clavuligerus KK, produced about 1150 mg/L of clavulanic acid in the same medium. After the addition of $MgSO_4$ to the basal medium, S. clavuligerus KK produced about 1550 mg/L of clavulanic acid, with shows about 1.3 times higher than that produced in the basal medium. In order to select the proper bioreactor for the production of clavulanic acid, a batch culture was performed in an airlift, a bubble column and an stirred tank bioreactors. In an airlift bioreactor, about 1350 mg/L of clavulanic acid was produced, in a bubble column bioreactor, about 1550 mg/L, in a stirred tank bioreactor, about 2200 mg/L, respectively. The production of clavulanic acid in stirred tank bioreactor was about 50% higer than that by an airlift and a bubble column bioreactors. According to this result, the stirred tank bioreactor was selected as a proper bioreactor.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.356-361
• /
• 2022

Bacillus sp. is a useful strain for agriculture because it promotes plant growth and controls plant pathogens through a variety of mechanisms. In this study, we obtained a microbial preparation with a high number of viable cells by culturing newly isolated soil bacteria on an optimized medium. Subsequently, we applied this preparation to lettuce to enhance its growth and yield. First, B. amyloliquefaciens ISP-5 was isolated from soil. Next, optimization of culture medium was carried out using 5 L scale fermenters. When culturing B. amyloliquefaciens ISP-5 on this optimized medium, the number of viable cells was approximately 1000 times higher than that obtained from culturing on the commercial medium. Afterwards, the plant growth promotion properties of the ISP-5 strain were evaluated using lettuce as a test plant. Foliar spray treatment of lettuce was carried out by inoculating half the standard concentration suspension (0.5 × 10⁷ cfu/ml). As a result, leaf width increased by 8.6% and leaf length increased by 12.9% compared to the control group. Live weight also increased by 24.2% and dry weight by 23.9%. Considering the results from field test, B. amyloliquefaciens ISP-5 showed potential as a plant growth-promoting bacteria.

• Microbiology and Biotechnology Letters
• /
• v.27 no.5
• /
• pp.404-409
• /
• 1999

The most favorable nitrogen source for the production of protease by Aspergillus oryzae PF was 2% soybean flour among sodium nitrate, ammonium sulfate, defatted soybean, skim milk, casein, peptone, and yeast extract. The production of protease from A. oryzae PF was higher at the concentration of 2% lactose than at variable concentration of glucose, sucrose, soluble starch, corn starch, potato starch, wheat starch, rice starch, cellulose, and gum arabic. Protease production was affected by the concentration of KH2PO4, Triton X-100, CaCo3, and MgSO4, and it was the highest at the highest at the concentration of 3% KH2PO4, 0.01% Triton X-100, 0.3% CaCO3, and 0.06% MGSO4.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.463-469
• /
• 2008

During the last decade, monacolin-K biosynthesized by fermentation of red yeast rice (Monascus strains) was proved to have an efficient cholesterol lowering capability, leading to rapid increase in the market demand for the functional red yeast rice. In this study, the production medium composition and components were optimized on a shake flask scale for monacolin-K production by Monascus pilosus (KCCM 60160). The effect of three different soybean flours on the monacolin-K production were studied in order to replace the nitrogen sources of basic production medium (yeast extract, malt extract and beef extract). Among the several experiments, the production medium with dietary soybean flour to replace a half of yeast extract was very good for monacolin-K production. Plackett-Burman experimental design was used to determine the key factors which are critical to produce the biological products in the fermentation. According to the result of Plackett-Burman experimental design, a second order response surface design was applied using yeast extract, beef extract and $(NH_4)_2SO_4$ as factors. Applying this model, the optimum concentration of the three variables was obtained. The maximum monacolin-K production (369.6 mg/L) predicted by model agrees well with the experimental value (418 mg/L) obtained from the experimental verification at the optimal medium. The yield of monacolin-K was increased by 67% as compared to that obtained with basic production medium in shake flasks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1423-1429
• /
• 2011

This study was conducted to evaluate the effect of physical treatments on the antigenicity of gliadin in medium wheat flour. The wheat flour was treated with an autoclave (5, 10, 30, 50 min), a microwave (1, 5, 10 min), and both (10, 30, 50 min/ 5, 10 min), and investigated by SDS-PAGE, immunoblotting and Ci-ELISA using anti-gliadin IgG. The results showed that the binding ability of anti-gliadin IgG to gliadin in wheat flour was slightly decreased when autoclaved or when autoclaved and microwaved. Especially, it was reduced to about 69% after autoclaving for 50 min and 73% after autoclaving for 50 min and microwaving for 5 min. In addition, gliadin bands in the 50 min autoclaved group disappeared in both SDS-PAGE and immunoblotting. On the other hand, the antigenicity of gliadin was unaffected by microwaving alone. Consequently, there were no considerable changes in using an autoclave alone or in combination with a microwave. These results suggest that autoclaving may affect the reduction of the antigenicity of gliadin in medium wheat flour.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.5
• /
• pp.462-467
• /
• 2009

Cyclosporin A (CyA) produced by Tolypocladium inflatum is a promising drug owing to its immunosuppressive and antifungal activities. From an industrial point of view, the necessity to obtain a suitable and economic medium for higher production of CyA was the aim of this work. The present study evaluated the effect of different fermentation parameters in solid state fermentation, such as selection of solid substrate, hydrolysis of substrates, initial moisture content, supplementation of salts, additional carbon, and nitrogen sources, as well as the inoculum age and size, on production of CyA by Tolypocladium inflatum MTCC 557. The fermentation was carried out at $25{\pm}2^{\circ}C$ for 9 days. A combination of hydrolyzed wheat bran flour and coconut oil cake (1:1) at 70% initial moisture content supported a maximum production of $3,872{\pm}156\;mg$ CyA/kg substrate as compared with $792{\pm}33\;mg/kg$ substrate before optimization. Furthermore, supplementation of salts, glycerol (1% w/w), and ammonium sulfate (1% w/w) increased the production of CyA to $5,454{\pm}75\;mg/kg$ substrate. Inoculation of 5 g of solid substrate with 6 ml of 72-h-old seed culture resulted in a maximum production of $6,480{\pm}95\;mg$ CyA/kg substrate.