• 제목/요약/키워드: medical devices

검색결과 1,543건 처리시간 0.034초

국내 치과방사선의 현황 및 이용 실태 (The Actual State and the Utilization for Dental Radiography in Korea)

  • 신귀순;김유현;이보람;김세영;이귀원;박창서;박혁;장계용
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제33권2호
    • /
    • pp.109-120
    • /
    • 2010
  • 치과 X선 검사 시 환자선량의 권고량 가이드라인을 개발하기 위해서 우선 국내 치과방사 선의 현황 및 이용 실태를 설문조사하여 비교분석하였다. 응답을 받은 77곳의 치과병 의원 중에서 치과대학이 있는 치과대학병원을 A그룹(11곳), 치과대학이 없는 대학병원을 포함한 치과병원을 B그룹(30곳), 치과의원을 C그룹(36곳)으로 분류하였다. 그룹별로 분석한 결과는 다음과 같았다. 치과병 의원 한 곳당 평균 unit chairs수는 A그룹 140.2개, B그룹 15.3개, C그룹 5.8개, 평균치과의사수는 A그룹 112.6명, B그룹 7.3명, C그룹 1.7명, 평균방사선사수는 A그룹 3.1명, B그룹 0.5명, C그룹에는 한 명도 없었고, 평균치과위생사수는 A그룹 19.7명, B그룹 12.5명, C그룹 3.3명이었다. 설치된 치과용 X선장치의 평균보유수는 A그룹 14.64대, B그룹 3.21대, C그룹 2.19대로 나타났다. 이 중에서 구내촬영장치가 가장 많았고, 다음은 파노라마 장치, 세팔로 장치, CBCT 장치 순이었으며, 장치시스템의 비율은 세 그룹 모두 DR 시스템이 50% 이상으로 가장 많았다. 필름 시스템인 경우, 사용된 구내필름은 감광도가 높은 Insight 필름(Kodak, USA)이 대부분이었으며, 자동 현상기는 사용하는 곳이 적었으나, 필름유지기구는 사용하는 곳이 약간 많았다. PACS 이용률은 A그룹 90.9%, B그룹 83.3%, C그룹 16.7%이었고, 프로그램은 국내의 Infinitt에서 개발된 PiView STAR가 가장 많이 이용되고 있었다. 치과병 의원 한 곳당 2008년도의 연간 평균촬영건수는 A그룹이 B그룹보다 6.8배, C그룹보다 21.2배 더 많았으며, 구내 치근단 촬영과 파노라마 촬영이 대부분이었다. 구내 치근단 촬영 시 관전압과 관전류는 세 그룹 모두 비슷하였으나, 노출시간은 C그룹이 A그룹의 12배, B 그룹의 3.5배 정도 길었다. 즉, 대부분 치과위생사가 촬영하고 있는 C그룹에서는 방사선 노출량이 다른 그룹에 비해 훨씬 많았다. 그러나 파노라마촬영 시의 조건은 세 그룹에서 큰 차이가 없었다. 결론적으로, 촬영조건은 경험적 지식을 따르기보다는 권장량을 사용해야 하며, 필름시스템에서는 자동현상기와 필름유지기구를 사용하여 방사선의 노출량을 줄여준다. 또한 환자선량의 감소와 X선 영상의 질 향상을위해서 X선발생장치 및 관련기기의 체계적인 정도관리가 반드시 필요하다.

금속도재관으로 수복된 Abfraction lesion이 있는 치아에 가해지는 교합력의 응력 분포 분석 (Analysis of stress distribution of tooth restored with metal-ceramic crown covering abfraction lesion according to its finish line location under occlusal load)

  • 김지환;윤철욱;김태현;김한성;우대곤;이근우;심준성
    • 대한치과보철학회지
    • /
    • 제52권4호
    • /
    • pp.305-311
    • /
    • 2014
  • 목적: 다양한 원인으로 발생된 Abfraction 병소가 있는 치아를 금속도재관으로 수복 할 경우, 변연의 위치에 따라 예후가 다양해질 수 있다. 수복물의 장기적 성공을 검증하기 위해서는 응력분포의 분석이 필요하지만 금속도재관이 abfraction 병소의 적응증인 경우 금속도재관이 응력 분포에 미치는 영향을 밝히는 연구는 아직 없다. 본 연구의 목적은 abfraction 병소가 있는 치아를 수복하는 금속도재관이 바람직한 응력 분포를 나타낼 수 있는 조건을 알아 보고자 함이다. 재료 및 방법: 치아, 주위 조직과 금속 도재관의 외형을 반영한 2차원 유한 요소모델을 제작하고 144 N의 편심 교합력 하에서의 응력분포를 유한요소 분석법으로 분석하였다. 금속 도재관의 변연 위치를 쐐기모양의 결손부의 하연에(Group 0), 그리고 결손부의 하연보다 1 mm 하방(Group 1)과 2mm 하방(Group2)에 위치시켰다. 결과: Group 0에서 von Mises stress는 금속 도재관의 변연과 결손부의 첨부에 집중 되었고 협측 변연의 응력은 설측 부위로 분포되었다. Group 1과 Group 2에서의 응력분포양상은 비슷하게 나타났다. 응력은 결손부의 첨부에 집중되지만 협측과 설측의 응력띠는 서로 분리된 양상으로 나타났다. 결론: 금속도재관의 변연을 Abfraction 병소의 하연에 설정할 경우, 금속도재관은 Abfraction 병소의 첨부에 응력을 집중시킨다.

디지털 방사선 촬영장치의 흉부촬영 최적 조사조건에 관한 연구 (The Study for Optimal Exposure Condition of Chest Examination of Digital Radiography System)

  • 박지군;정봉재;박형후;노시철;강상식
    • 한국방사선학회논문지
    • /
    • 제10권2호
    • /
    • pp.109-115
    • /
    • 2016
  • 방사선학 영역에서의 디지털 영상 장치의 사용이 급격히 증가되고 있음에도 불구하고, 사용 장치에서의 최적 조사 조건 설정이 미흡한 실정이다. 본 연구에서는 디지털 방사선 장치의 촬영조건에 따른 피폭선량과 화질을 비교 평가하고자 하였다. 이에 CR, DR의 디지털 방사선 촬영장치를 이용하여 현재 사용하고 있는 촬영조건을 기준으로 각 5단계씩 조건을 변경시키면서 피폭선량을 측정하였으며, 획득한 영상은 의료영상전문가 20명에게 일본 결핵예방학회의 평가법을 준용하여 평가하였다. 그 결과, CR 시스템의 경우 기준 조건인 110 kVp, 3.2 mAs에서의 화질평가 86점 보다 120 kVp, 1.5~2.4 mAs에서 화질평가 91, 95.5점으로 보다 우수하게 나타났으며, 이 때 피폭선량 또한 기준 조건에서의 $105.11{\mu}Gy$ 보다 낮은 $61.3{\sim}98.4{\mu}Gy$로 평가되었다. DR 시스템 경우는 오히려 기준 조건인 125 kVp, 3.2 mAs에서의 화질평가 91점보다 관전압이 낮은 영역인 112 kVp, 2.4~3.2 mAs에서 97점, 98.6점 사이의 높은 화질평가 점수를 나타내었으며, 피폭선량 또한 기준 조건에서의 $93{\mu}Gy$ 보다 낮은 $61.5{\mu}Gy$, $77.2{\mu}Gy$로 평가되었다. 이러한 결과는 디지털 장치의 적절한 조사조건을 설정함으로써 동일한 화질의 영상에 대해 환자 피폭선량을 저감시킬 수 있음을 확인할 수 있었다.

연관상품 추천을 위한 회귀분석모형 기반 연관 규칙 척도 결합기법 (A Regression-Model-based Method for Combining Interestingness Measures of Association Rule Mining)

  • 이동원
    • 지능정보연구
    • /
    • 제23권1호
    • /
    • pp.127-141
    • /
    • 2017
  • 인터넷과 모바일 관련 기술의 발전과 기기의 보급은 물리적 공간의 제약을 극복하게 하고, 다양한 상품과 서비스를 소비자에게 제공함으로써, 소비자에게 선택의 폭을 넓히는 기회를 제공하는 반면, 많은 시간과 노력을 기울이고도 소비자가 자신의 기호에 적합한 품목을 선택하기 힘들어지는 부작용을 낳았다. 이에 따라, 기업은 추천 시스템을 활용하여 소비자가 원하는 품목을 더 쉽게 찾는 수단을 제공하고 있다. 상품 간의 연관성을 통계적으로 분석하는 연관 규칙 마이닝 기법은 직관적인 형태의 척도를 규칙과 함께 제공함으로써, 이로부터 도출된 규칙에 포함된 품목 간의 관계를 이해하고, 이를 추천에 적용하기 쉽다는 강점을 갖는다. 그러나, 서로 다른 규칙의 척도가 일관되게 어느 한 쪽의 규칙이 더 우위에 있음을 알려주지 못한다면, 수많은 품목 중 추천에 적합한 품목을 적절히 선별해내기 힘든 상황이 발생한다. 본 연구에서는 추천 상품의 순위를 결정할 수 있도록 연관 규칙 마이닝 기법에 회귀분석모형을 보완적으로 적용하는 방안을 제시하고자 수행되었다. 연관 규칙 마이닝에서 보편적으로 사용되고 있는 지지도, 신뢰도, 향상도를 활용하여 모형을 구현함으로써, 직관적으로 이해하기 쉬울 뿐만 아니라, 실무에서도 활용하기 쉬운 방안을 제시하고자 하였다. 국내 최대규모의 온라인 쇼핑몰의 주문 데이터를 활용한 실험을 통해, 제안된 모형으로부터 얻어진 추천 점수를 기반으로 추천상품을 결정하고, 이를 추천에 적용함으로써 추천 적중률을 향상시킬 수 있음을 보였다. 특히, 최근 모바일 상거래가 빠르게 확산됨에 따라, 제한된 화면에 한정된 수의 추천 품목을 제시해야 하는 상황에서 적합한 추천 기법임을 확인할 수 있었다.

국가원수 경호적 측면에서의 EMP(Electro Magnetic Pulse) 방호 시스템에 대한 고찰 (Aspect of the chief of state guard EMP (Electro Magnetic Pulse) protection system for the consideration)

  • 정주섭
    • 시큐리티연구
    • /
    • 제41호
    • /
    • pp.37-66
    • /
    • 2014
  • 최근 전자공학의 급격한 발달로 컴퓨터와 전자 통신 기술에 의존도가 높아지고 있으며 각 부분이 상호 연계되어 모든 전자 장비를 무용지물로 만드는 EMP에 의한 직접적 또는 간접적인 피해가 발생하고 있다. 대한민국과 긴박한 대치 상황에 놓여 있는 북한은 상당한 수준의 EMP 관련 기술을 가지고 있으며, EMP 무기를 이미 보유했거나 수년 내 EMP 무기의 개발을 완료할 것으로 전망하고 있다. 북한은 장거리 미사일발사 직후에 여러 차례 핵실험을 실시하였으며 노골적인 핵 협박 공세가 강화되었음을 보았을 때, 고고도 핵실험을 언제라도 할 수 있는 능력을 보유하였다고 보아야 하며, 이는 EMP 무기의 실전적인 공격능력이 갖추어 졌다는 것을 의미한다고 할 것이다. 이러한 시점에서 피해상황을 예측하여 대한민국의 안보현실에 부합되는 EMP 방호시스템의 구축은 무엇보다도 필요한 과제이다. 그 피해의 규모는 예측 불가하지만 크게 군사적 피해와 사회 경제적 피해 그리고 인명피해상황으로 구분해 보았을 때 통신 시스템 및 위성장비의 마비를 시작으로 군사안보시스템과 수송, 금융, 국가비상체계 등 여러 부문으로 피해가 나타난다. 일반적으로 EMP는 직접적인 인명피해는 없다고 보고되지만 의료기기에 의존하는 사람들에게는 치명적인 피해가 나타날 수 있다. 또한, 국가전력체계 마비로 인한 전력공급중단이 가져다주는 피해만 생각 할 것이 아니라 주 전력발전 중 원자력발전소 의존도가 높은 국내는 블랙아웃현상발생 시 심각한 원전사고로 이어질 수 있는 발전소 내부의 문제점도 예측해 보아야 한다. 우선 특별 전문 위원회를 구성하여 EMP 방호시설 및 장비에 대한 수요조사를 실시하고, 그에 맞는 소요예산을 구성하여 엄격한 기준 아래 시공업체를 선별하여야 한다. 그 후 EMP 방호성능검증을 위한 기관을 만들어 성능을 검증 한 후 유지 보수 안전 및 설계 시공회사 보안 관리를 하는 조직적이고 체계적인 과정을 거쳐 경호시설물이나 경호통신장비 기동장비 등에 대한 완벽한 EMP 방호시스템을 갖추어 놓아야 할 것이다.

  • PDF

직업성 피부질환에 대한 현황 파악 및 관리 대책 수립을 위한 연구 (A Study on the Establishment of Management Methods about Occupational Dermatoses)

  • 임현술;정해관;최병순;김지용;성열오;김양호
    • Journal of Preventive Medicine and Public Health
    • /
    • 제29권3호
    • /
    • pp.617-637
    • /
    • 1996
  • Occupational dermatosis is one of the most prevalent occupational disorders. However, the extent of the occupational dermatoses including incidences and prevalencies of each disease entity, and etiologic materials are not yet welt stated in Korea. Authors reviewed the literatures on the statistic data and reports on the occupational dermatoses, and surveyed on the occupational dermatoses in two factories, and surveyed the physicians responsible to the occupational dermatoses with formed questionnaire. The results are as follows; 1. Among medical journals published since 1964, there were 31 articles on the occupational dermatoses. Of 31 articles, 18 were case reports and all others were review articles. Of 18 case reports, 9 were epidemiologic survey. The Workers' Periodic Health Examinations revealed that prevalence of the occupational dermatoses was highest(4.36 per 10,000 workers) in 1974, but number of the cases reported were decreased sharply since 1978 with some tendency to increase since 1981. There were 2,240 reported cases of occupational dermatoses between 1966 and 1992, which is 1.90% of all the reported occupational diseases. Skin infection and injuries due to chemicals were most frequent and there were 6 cases of skin cancer. 2. In an epidemiological survey on the dermatoses among 995 workers in a metal product manufacturing factory and 225 workers in a coal chemical factory, there were 794 with dermatomycosis, 296 workers with acne, 130 workers with scar, 123 workers with deformity of toe nails. Scars, photosensitivity dermatitis, deformity of finger and toe nails, and acne were more prevalent in the metal product manufacturing factory(p<0.05). In the metal prouct manufacturing factory, workers treating organic solvents and oils had more dermatoses than those without treating the materials(p<0.05). On the skin patch performed on 16 workers in the metal product manufacturing factory, there were 8 cases of irritation dermatitis and 5 cases of contact dermatitis. Prevalence of contact dermatitis in the metal product manufacturing factory was 1.3%. 3. On the questionnaire survey, 34 dermatologists, 29 doctors of preventive medicine, and 22 family physician replied. The proportion of occupational etiology among all dermatoses assumed by the physicians were below 9%, and the most important occupational dermatosis in Korea was contact dermatitis. Main etiologic materials related to the occupational dermatosis were organic solvent, acid and alkali, and metals. The reason for the scarcity of report of occupational dermatoses were difficulty in diagnosis and physician's ignorance of the occupational etiology. They replied that to prevent the occupational dermatoses in the workplace, the use of protective devices was most important, and development of diagnostic criteria on the occupational dermatoses is urgent. Above results shows us that there is many workers with occupational dermatoses, but they are mostly unreported. Measures to prevent and manage the occupational dermatoses are not satisfactory at present. Hence, authors suggest measures for the precise diagnosis, report and prevention of the occupational dermatoses. a. Dermatologist, preventive physician, and industrial hygienist should work as a team to examine the high risk group and establish the preventive measures. b. Disease entities, diagnostic criteria of occupational dermatoses should be listed, criteria for the compensation and job fitting at recruitment should be established, and manual for the proper treatment and effective prevention of each occupational dermatosis should be developed. c. Patch test antigens against each occupational category should be developed and it should be available to any physicians responsible. d. To facilitate the diagnosis of occupational dermatoses by the doctors responsible for the Workersr Periodic Health Examination, development of standardized questionnaire, education on the techniques of the patch test, and cooperation with the dermatologist in diagnosis of occupational dermatoses is essential.

  • PDF

LC-MS/MS를 이용한 축산물 중 Spinetoram 공정시험법 개발 및 검증 (Development of analytical method for determination of spinetoram residues in livestock using LC-MS/MS)

  • 고아영;김희정;도정아;장진;이은향;주윤지;김지영;장문익;이규식
    • 분석과학
    • /
    • 제29권2호
    • /
    • pp.94-103
    • /
    • 2016
  • 이 연구는 수입을 포함한 국내 유통 축산물 중 spinetoram의 안전관리를 위한 공정시험법을 확립하기 위해 수행하였으며 시험법의 선택성, 검출한계 및 정량한계, 회수율에 대한 검증을 통하여 공정시험법으로의 유효성을 확인하였다. Spinetoram을 효과적으로 분석하기 위하여 LC-MS/MS를 분석기기로 사용하였고, acetonitrile으로 추출 후 PSA를 이용한 d-SPE정제법을 적용하여 시료의 불순물을 정제하였다. 개발된 spinetoram 시험법의 직선성은 농도 대비 피크면적과의 결정계수(r2)가 0.994 이상으로 우수하였으며, 검출한계 및 정량한계는 각각 0.002, 0.01 mg/kg으로 높은 감도를 나타내었다. 축산물 시료 중 모든 처리구에서 평균 회수율은 81.9-106.4 %였고, 분석오차는 10 % 이하로 정확성 및 재현성이 우수함을 확인할 수 있었다. 또한 광주청과의 실험실간 검증 결과에서도 평균 회수율 87.4-109.1 %를 나타내어 모두 CODEX 가이드라인(CAC/GL 40, 2003)의 기준을 부합하는 것을 확인하였다. 따라서 개발된 시험법은 낮은 검출한계 및 정량한계, 우수한 직선성, 회수율 시험을 통한 양호한 정밀성 및 재현성 등이 입증되어 축산물 중 spinetoram을 분석하기 위한 식품공전 공정시험법으로 활용하고자 한다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

관상동맥 우회술 500례의 임상적 고찰 (Clinical Analysis of 500 Cases of Coronary Artery Bypass Grafting)

  • 신윤철;김기봉;안혁;채헌;노준량;서경필
    • Journal of Chest Surgery
    • /
    • 제32권6호
    • /
    • pp.525-531
    • /
    • 1999
  • 배경: 본 연구는 1981년 11월부터 1997년 6월까지 관상동맥 우회술을 받은 500례의 협심증 환자를 대상으로 술전 진단, 수술방법, 수술사망률, 수술합병증, 술후 증상의 재발과 치료에 대해 알아보았다. 대상 및 방법: 500례 중 남자는 330례, 여자는 170례였고 평균 연령은 57.4$\pm$8.9세였다. 술전 환자의 평가를 위해 심전도, 심에코, MIBI scan, 내경동맥과 대퇴동맥에 대한 Duplex Sono, CK, LDH를 포함한 일반적인 혈액 검사, 관상동맥 조영술 등을 시행하였으며, 술후 부정맥과 심근경색증 등의 합병증에 대한 판정 지표로 삼았다. 결과: 술전 진단으로 불안정성 협심증이 282례 (56.4%), 안정성 협심증이 141례 (28.2%), 심근경색후 협심증이 58례 (11.6%), 급성 심근경색증이 8례 (1.6%), 이형 협심증이 7례 (1.4%), 경피적 관상동맥확장술 실패가 4례 (0.8%)였다. 술전 관상동맥 조영술 상 삼혈관 질환이 263례 (52.6%), 이혈관 질환이 93례 (18.6%), 단일혈관 질환이 71례 (14.2%)였으며, 좌주관상동맥 질환이 68례 (13.6%), 그외 5례(1.0%) 있었다. 환자들은 술전 여러 가지 관상동맥 질환의 위험인자들에 노출되어 있었으며 고혈압, 흡연, 비만, 당뇨 등의 빈도가 점차 증가하고 있었다. 수술은 대복재정맥 1143문합, 내흉동맥 442문합, 요골동맥 17문합, 위대망막 동맥 1문합으로 환자당 평균 3.2$\pm$1.2문합을 시행하였으며, 인공판막 치환술 또는 성형술이 동시에 시행된 경우가 31례 (6.2%), 관상동맥 내막절제술 또는 성형술이 27례 (5.4%), 좌주관상동맥 성형술이 13례 (2.6%), 내경동맥 내막절제술이 5례 (1.0%), Maze 술식이 3례 (0.6%), 기타 술식이 11례 (2.2%) 등에서 시행되었다. 수술시간은 대동맥차단 시간이 평균 99$\pm$67분이었다. 수술사망률은 6.8% (34/500)이었고, 여성, 심근경색증 \ulcorner과거력, 급성 심근경색증과 응급수술 등이 유의한 위험인자로 나타났다. 합병증으로서 부정맥 109례 (21.8%), 신경학적 합병증 27례 (5.4%), 출혈 25례 (5.0%), 수술전후 심근경색증 25례 (5.0%), 종격동염을 포함한 창상감염 20례 (4.0%), 저심박출증 18례 (3.6%), 급성 신부전증 12례 (2.4%), 폐렴 등의 기타 합병증이 10례(2.0%)있었다. 술후 추적기간은 평균 25$\pm$23개월이었으며, 증상의 재발로 인한 재수술은 5명의 환자에서 시행되었다. 결론: 수술경험의 축적, 심근보호법의 다양한 적용, 심기능 보조장치의 적극적인 사용으로 고위험군 환자의 증가에도 불구하고 수술사망률을 감소시킬 수 있으리라 기대된다.

  • PDF

HPLC-UVD를 이용한 농산물 중 살균제 Oxathiapiprolin의 잔류분석법 확립 (Establishment of an Analytical Method for Determination of Fungicide Oxathiapiprolin in Agricultural Commodities using HPLC-UV Detector)

  • 장진;김희정;도정아;고아영;이은향;주윤지;김은주;장문익;이규식
    • 한국식품위생안전성학회지
    • /
    • 제31권3호
    • /
    • pp.186-193
    • /
    • 2016
  • Oxathiapiprolin은 병원균의 포자형성과 효모성장을 저해하여 노균병을 방제하는 piperidinyl thiazole isoxazoline 계열 살균제로 2015년 국내 사용등록이 요청된 신규약제이다. 본 연구에서는 oxathiapiprolin의 신규등록과 관련해 안전관리를 위한 공정시험법 마련이 요구되어 농산물 중 잔류분석법을 개발하였다. 농산물 중 oxathiapiprolin은 acetonitrile로 추출한 뒤 분배효율 향상을 위해 1 N sodium hydroxide (NaOH)를 이용해 염기성으로 조절하여 비해리 상태로 만든 뒤 dichloromethane으로 액액분배하였으며 분배추출액은 silica SPE 카트리지로 정제한 뒤 HPLC-UVD로 분석하였다. 개발된 분석법의 검출한계(LOD) 및 정량한계(LOQ)는 각각 0.003, 0.01 mg/kg이었고, 대표농산물 5종(고추, 감귤, 감자, 대두, 현미) 중 oxathiapiprolin의 평균 회수율은 86.7-112.7%(상대표준편차, $RSD{\leq}10%$)으로 나타났다. 이는 잔류물 분석에 관한 CODEX 가이드라인(CAC/GL 40)을 만족하는 것으로 확인되었다. 따라서 개발된 분석법은 국내외 유통 농산물 중 oxathiapiprolin의 안전평가를 위한 잔류량 적부 판정에 있어 공정시험법으로 사용되기에 적합할 것으로 판단된다.