• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.113-120
• /
• 2000

This study has developed a new liquid crystal calibration technique using Neural networks with median filtering and applied this technique to heat transfer measurements. To verify the validity of this new measurement technique, the local Nusselt numbers on a flat plate surface subjected to an axisymmetric impinging jet were measured and compared with the results by the conventional Hue-temperature calibration technique under the same conditions. Because the Neural networks predict the non-linear relations between temperatures and corresponding R, G, B values, Neural networks-median filtering calibration technique can utilize a much wider color band in the experiment than the Hue-temperature calibration technique, resulting in a significant reduction in the experimental time.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제21권4호
• /
• pp.11-18
• /
• 2007

A moving object detection algorithm for surveillance video is here proposed which employs background initialization based on two-stage median filtering and a background updating method based on state transition diagram. In the background initialization, the spatiotemporal similarity is measured in the subinterval. From the accumulated difference between the base frame and the other frames in a subinterval, the regions affected by moving objects are located. The median is applied over the subsequence in the subinterval in which regions share similarity. The outputs from each subinterval are filtered by a two-stage median filter. The background of every frame is updated by the suggested state transition diagram The object is detected by the difference between the current frame and the updated background. The proposed method showed good results even for busy, crowded sequences which included moving objects from the first frame.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.329-332
• /
• 2009

Speckle noise reduction for ultrasound CT image using morphological adaptive median filtering based on edge preservation is presented in this paper. Speckle noise is multiplicative feature and causes ultrasound image to degrade widely from transducer. An input image is classified into edge region and homogeneous region in preprocessing. The speckle is reduced by morphological operation on the 2D gray scale by using convolution and correlation, and edges are preserved. The adaptive median is processed to reduce an impulse noise. As the result the proposed method enhances the image to about 20% in comparison with Winer filter by Edge Preservation Index and PSNR.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제4권1호
• /
• pp.147-154
• /
• 2001

The underwater explosion shock test is performed for the evaluation of the shock-resistant capability which is a very critical factor considering the survivability of the battle ship. Some measured signals have impulsive noise and gaussian white noise because of the unstable power supply system and the transient movement of cables during the underwater explosion shock test. The advanced shock signal analysis method which remove the noise of measured signal using the threshold policy of the median filter and the orthogonal wavelet coefficients are proposed. It is verified that the signal-to-noise ratio was improved about 30㏈ by the numerical simulation.

• Journal of information and communication convergence engineering
• /
• 제15권1호
• /
• pp.49-52
• /
• 2017

Ganglion cysts are benign soft tissues usually encountered in the wrist. In this paper, we propose a method to extract a ganglion cyst region from ultrasonography images by using image segmentation. The proposed method using the possibilistic c-means (PCM) clustering method is applicable to ganglion cyst extraction. The methods considered in this thesis are fuzzy stretching, median filter, PCM clustering, and connected component labeling. Fuzzy stretching performs well on ultrasonography images and improves the original image. Median filter reduces the speckle noise without decreasing the image sharpness. PCM clustering is used for categorizing pixels into the given cluster centers. Connected component labeling is used for labeling the objects in an image and extracting the cyst region. Further, PCM clustering is more robust in the case of noisy data, and the proposed method can extract a ganglion cyst area with an accuracy of 80% (16 out of 20 images).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.519-521
• /
• 2015

세라믹 소재 영상에서 결함 영역이 다른 영역보다 명암도가 밝게 나타나는 정보를 이용하여 ROI 영역을 추출한다. 추출된 ROI 영역에서 Blurring 기법을 적용하여 미세 잡음을 제거한다. 미세 잡음이 제거된 ROI 영역에서 Median Filter기법을 적용하여 임펄스 잡음을 제거한다. 임펄스 잡음이 제거된 영역에서 Prewit Mask을 적용하여 수평과 수직 에지를 검출하고 검출된 에지에 윤곽선 추적 기법을 적용하여 결함 영역의 경계를 보정한다. 보정된 영상에서 Blob Labeling 기법을 적용하여 최종적으로 결함 영역을 추출한다. 제안된 방법을 8mm와 10mm 세라믹 소재 영상을 대상으로 실험한 결과, 기존의 결함 검출 방법보다 제안된 검출 방법의 검출 성능이 개선된 것을 확인하였다.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1049-1052
• /
• 2000

In this paper, an efficient method to find cut in the MPEG stream data is proposed. For this purpose, histogram difference and pixel difference is considered as a noise signal. The signal is then filtered out by a median filter to make the frame difference larger. The frame difference obtained in this way is classified into cut frame and non-cut frame by the 2-means clustering without using any threshold value. To improve the classification ratio, a back-propagation neural network is constructed, where outputs of 2-means clustering are used as the inputs of the network. The simulation results demonstrate the performance of the proposed methods.

• The Journal of the Acoustical Society of Korea
• /
• 제31권1호
• /
• pp.29-38
• /
• 2012

This paper presents a transient noise reduction system in a speech signal. The proposed transient noise reduction system utilizes a median filter to reduce the transient noise. Since the median filter can distort speech during the noise reduction, a long-term prediction (LTP) filter is adopted as a pre-processor to minimize speech distortion. The speech information preserved by the LTP filter is re-synthesized after reducing the noise. This paper verifies the weakness of a linear prediction (LP) filter and the superiority of the LTP filter for preserving the speech component in transient noise presence environment. Applying the proposed system, the signal-to-noise ratio (SNR) of output is improved by 8dB in both speech and noise presence region, and PESQ score is increased by 1 point comparing with noisy input.

• Journal of the Korea Convergence Society
• /
• 제8권11호
• /
• pp.15-20
• /
• 2017

Recently, with the development of the IT industry, interest in computer convergence technology is increasing in various fields. Especially, in the semiconductor field, a vision system that uses a camera and computer convergence is often used to inspect semiconductor device defects in the production process. Various systems have been studied to remove noise, which is a major cause of degradation in processing of data related to these image processing systems. In this paper, we try to detect defects in BGA (Ball Grid Array) package devices by recognizing defects in advance during mass production. We propose a measurement system using a Gaussian filter, a Median filter, and an Average filter, which are widely used for noise reduction of image data Applying the proposed system to the manufacturing process of the BGA package can be used to judge whether the defect is good or not, and it is expected that productivity will be improved.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제39권4호
• /
• pp.418-428
• /
• 2002

In this paper, we propose a motion-adaptive de-interlacing method using motion compensated interpolation. In a conventional motion compensated method, a simple pre-filter such as line averaging is applied to interpolate missing lines before the motion estimation. However, this method causes interpolation error because of inaccurate motion estimation and compensation. In the proposed method, EBMF(Edge Based Median Filter) as a pre-filter is applied, and new matching method, which uses two same-parity fields and opposite-parity field as references, is proposed. For further improvement, motion correction filter is proposed to reduce the interpolation error caused by incorrect motion. Simulation results show that the proposed method provides better performance than existing methods.