• 제목/요약/키워드: mechanical life

검색결과 3,001건 처리시간 0.039초

광합성 남세균을 도포한 투수 콘크리트의 이산화탄소 고정에 의한 물성 변화 (Physical Properties of Photosynthetic Cyanobacteria Applied Porous Concrete by CO2 Sequestration)

  • 장인동;이남곤;박정준;곽종원;문훈
    • 한국건설순환자원학회논문집
    • /
    • 제11권4호
    • /
    • pp.416-424
    • /
    • 2023
  • 콘크리트는 전 생애주기에서 막대한 양의 이산화탄소를 배출하며, 이산화탄소 감축을 위한 사회적인 요구에 따라 콘크리트에 이산화탄소를 광물형태로 저장하려는 연구가 지속되고 있다. 본 연구에서는 광합성을 통해 이산화탄소를 흡수하여 탄산칼슘으로 고정하는 남세균(Cyanobacteria)을 다공성 콘크리트 기질에 도포하였으며, 이의 특수 환경 양생에 따른 콘크리트 기질의 특성 변화를 분석하였다. 실험 결과 미생물에 의한 탄산칼슘 석출은 빛이 닿는 표면부에서 집중되어 있는 것을 확인하였으며, 대부분의 석출이 골재가 아닌 페이스트 부분에서 발생하였다. 이러한 미생물에 의한 탄산칼슘 석출은 페이스트의 역학성능을 강화하였으며, 양생 재령의 경과에 따라 전체 압축강도가 향상되는 효과를 보였다. 또한 미생물 막과 탄산칼슘의 증가로 공극구조가 개선되어 투수량 감소에도 영향을 끼쳤다.

The Gene Pyramiding Effect of qBK1 and qFfR1 Genes of Major Resistance Genes in Bakanae Disease

  • Sais-Beul Lee;Sumin Jo;Jun-Hyun Cho;Nkulu Rolly Kabange;Ji-Yoon Lee;Yeongho Kwon;Ju-Won Kang;Dongjin Shin;Jong-Hee Lee;You-Cheon Song;Jong-Min Ko;Kyung-Min Kim;Dong-Soo Park
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2020년도 추계국제학술대회
    • /
    • pp.65-65
    • /
    • 2020
  • Bakanae disease, caused by Gibberella fujikuroi, is one of the most devastating diseases threatening rice production in Korea. In recent years, the incidence of bakanae disease became alarming due to the mechanical transplanting practice where the spread of bakanae can be amplified during accelerating seeds growth, due to the use of seeding boxes. The development of resistant rice cultivars could be the primary and effective method for controlling bakanae disease. However, the effects of individual resistance genes are relatively small. Therefore, pyramiding of bakane R genes in rice breeding is a promising strategy having a high potential to mitigate the advert effects of bakanae disease. This study employed a gene pyramiding approach to develop bakanae disease resistant rice lines carrying qBK1, qFfR1 introduced from rice line MY299BK and cv. Nampyeong, respectively. The MY299BK carries qBK1 introduced from cv. Shingwang, which was found to have a high resistance compare to Nampyeong. In addition, the pyramiding effect of the qBK1 and qFfR1 resistance genes were investigated, and the presence or absence of these genes helped us investigate their interaction through bioassay method and MAS. Furthermore, the distribution of resistance in the population showed a biased distribution toward resistance in the F6:7 populutions. However, we could not confirm the accumulation effect of the resistance gene, but the difference between the two genes by the SN2 marker was confirmed. Therefore, the qBK1 gene harbored by MY299BK appears to be different from the qFfR1 carried by Nampyeong, suspected to possess a different bakanae disease resistant gene different from those found in MY299BK and Nampyeong.

  • PDF

Korean Society of Heart Failure Guidelines for the Management of Heart Failure: Management of the Underlying Etiologies and Comorbidities of Heart Failure

  • Sang Min Park;Soo Youn Lee;Mi-Hyang Jung;Jong-Chan Youn;Darae Kim;Jae Yeong Cho;Dong-Hyuk Cho;Junho Hyun;Hyun-Jai Cho;Seong-Mi Park;Jin-Oh Choi;Wook-Jin Chung;Seok-Min Kang;Byung-Su Yoo;Committee of Clinical Practice Guidelines, Korean Society of Heart Failure
    • Korean Circulation Journal
    • /
    • 제53권7호
    • /
    • pp.425-451
    • /
    • 2023
  • Most patients with heart failure (HF) have multiple comorbidities, which impact their quality of life, aggravate HF, and increase mortality. Cardiovascular comorbidities include systemic and pulmonary hypertension, ischemic and valvular heart diseases, and atrial fibrillation. Non-cardiovascular comorbidities include diabetes mellitus (DM), chronic kidney and pulmonary diseases, iron deficiency and anemia, and sleep apnea. In patients with HF with hypertension and left ventricular hypertrophy, renin-angiotensin system inhibitors combined with calcium channel blockers and/or diuretics is an effective treatment regimen. Measurement of pulmonary vascular resistance via right heart catheterization is recommended for patients with HF considered suitable for implantation of mechanical circulatory support devices or as heart transplantation candidates. Coronary angiography remains the gold standard for the diagnosis and reperfusion in patients with HF and angina pectoris refractory to antianginal medications. In patients with HF and atrial fibrillation, longterm anticoagulants are recommended according to the CHA2DS2-VASc scores. Valvular heart diseases should be treated medically and/or surgically. In patients with HF and DM, metformin is relatively safer; thiazolidinediones cause fluid retention and should be avoided in patients with HF and dyspnea. In renal insufficiency, both volume status and cardiac performance are important for therapy guidance. In patients with HF and pulmonary disease, beta-blockers are underused, which may be related to increased mortality. In patients with HF and anemia, iron supplementation can help improve symptoms. In obstructive sleep apnea, continuous positive airway pressure therapy helps avoid severe nocturnal hypoxia. Appropriate management of comorbidities is important for improving clinical outcomes in patients with HF.

산화아연 나노입자 유형이 카라기난 기반 복합 필름의 구조, 기계적 및 항균 특성에 미치는 영향 (Effect of zinc oxide nanoparticle types on the structural, mechanical and antibacterial properties of carrageenan-based composite films)

  • 신가영;김효린;박소윤;박미소;김찬형;허재영
    • 한국식품저장유통학회지
    • /
    • 제31권1호
    • /
    • pp.126-137
    • /
    • 2024
  • 카라기난 기반 복합필름은 세 가지 다른 아연 염(zinc acetate, zinc chloride 및 zinc nitrate) 원료를 사용하여 합성한 ZnONPs를 카라기난에 첨가하여 solvent casting 방법으로 제작되었다. SEM 결과에 따르면, 사용된 아연 염의 종류에 따라 ZnONPs의 크기와 모양에 차이가 나타났지만, 모든 ZnONPs가 카라기난 복합필름 내에서 균일하게 분산되어 있는 것을 확인할 수 있었다. 카라기난 기반 복합필름(Car-ZnONPs)의 두께는 아연 염의 종류와 관계없이 순수 카라기난 필름에 비해 증가하였다. 파단 연신율(EB)은 증가하였고, 인장강도(TS)는 유의적으로 감소하였으며, 탄성 계수(EM)는 유의적 차이를 나타내지 않았다. 이를 통해 복합필름의 기계적 특성인 TS와 EB는 첨가된 나노입자의 크기와 첨가량에 영향을 받는다는 것을 확인하였다. 또한, 모든 종류의 Car-ZnONPs 복합필름은 E. coli O157:H7 및 L. monocytogenes 에 대해 강한 항균 활성을 나타냈으며, 특히 zinc chloride로 합성된 Car-ZnONPsZC 필름이 가장 우수한 항균 성능을 나타냈다. 이는 zinc chloride에서 합성된 나노입자가 다른 아연 염에 비해 더 많은 아연 이온을 방출하기 때문으로 판단된다. 아연 염의 종류가 ZnONPs의 항균 능력에 영향을 미치며, 이러한 영향은 염의 종류에 따라 변화하는 ZnONPs의 크기, 형태 및 아연 이온 방출 정도에서 기인한다. 평가된 복합필름 중 Car- ZnONPsZC가 가장 높은 자외선 차단 특성을 보였으며, 파단 연신율도 순수 카라기난 필름에 비해 유의미하게 증가하여, 포장된 식품의 안전성을 유지하고 유통기한을 연장하는 데 활성 포장 필름으로 사용될 수 있을 것으로 기대된다.

나이티놀 스텐트 와이어의 기계적 특성 향상을 위한 초음파 나노표면 개질 처리에 대한 연구 (Application of Ultrasonic Nano Crystal Surface Modification into Nitinol Stent Wire to Improve Mechanical Characteristics)

  • 김상호;서태석;이창순;박인규;조인식;편영식;김성현
    • 한국의학물리학회지:의학물리
    • /
    • 제20권2호
    • /
    • pp.80-87
    • /
    • 2009
  • 비혈관 스텐트(식도용, 담도용, 대장용, 십이지장용, 기관지용) 재질로 가장 널리 사용되고 있는 Nitinol wire 형상기억합금의 기계적 특성 향상을 위해 초음파 나노표면 개질(UNSM) 기술을 적용하여 Nitinol wire의 상변화와 초탄성 특성 및 표면 잔류응력 등의 변화를 연구하였으며, 탄력에너지와 부식내구성을 통한 스텐트의 수명 연장방법을 연구하고자 하였다. 본 연구에 사용된 Nitinol wire는 ${\phi}1.778$ mm로 UNSM 처리 전후의 표면거칠기 값은 Ra=0.092${\mu}m$와 Ra=0.093${\mu}m$로 비슷 하였지만, 초기시편에서는 미세결함과 인발가공 흔적이 확연히 관찰되었으나, UNSM 후에는 인발가공 흔적과 미세 표면 결함은 사라진 것이 발견되었다. 또한 잔류응력 측정 결과, 초기 시험편에는 +3.65 MPa였으나 UNSM 처리 후에는 -4.09 MPa로 확인되었으며, XRD를 통한 결정구조 분석 결과 $42.28^{\circ}$에서 초기보다 약한 (110) 오스테나이트 피크가 관찰되었으며, 대신 (020), ($1{\overline{1}}1$), 그리고 (021) 피크가 명확히 Martensite (B19' Monoclinic lattices) 구조로 확인되었고, (300)의 R상 (Rhombohedral lattices)에 대한 추가 피크가 미비하게 관찰되었다. 탄성변형에 따른 에너지 흡수력과 하중 제거에 따른 에너지의 회복력인 탄력계수(modulus of resilience) $U_r$은 단위체적당 변형률 에너지로 4.31 $MJ/m^3$에서 5.85 $MJ/m^3$로 증가하였다. 이와 같이 표면결함 제거와 인장응력을 압축응력으로 재편성하는 것만으로도 피로내구성을 크게 향상시킬 수 있다고 사료되며, 생체적합성과 더불어 내부식성, 내마모성 및 내구수명 향상을 실용화할 수 있는 표면개질 장치가 개발된다면, 현재 한국인 사망원인 1위인 순환계 질환(심근경색, 뇌졸중 등)에 사용되는 혈관계통의 스텐트 개발에도 응용개발연구가 가능할 것으로 예상된다.

  • PDF

기계개간의 새로운 작업체계와 숙지화 촉진에 관한 연구 (A Study on a New Working-system of Mechanical Land Clearing and Development of Fertle Soil.)

  • 황은
    • 한국농공학회지
    • /
    • 제13권1호
    • /
    • pp.2162-2176
    • /
    • 1971
  • 옛날부터 우리들의 선조들이 한반도에 정착하면서부터 산야를 파서 농경지를 조성하였으며 지력(地力)을 회복하는 대신 토지를 교체하면서 오랫동안 봉건적 농업을 이루어 나왔다. 근대농업은 기계를 도입하였으며 따라서 농지조성도 기계개간을 하게 되었다. 종래와 같이 산지를 파면 된다는 피상적인 형식에 그칠 것이 아니라 실질적으로 개간작업방식, 작업시간, 작업능율, 작물재배효과 등을 종합하여 가장 우수한 방법을 추출(抽出) 연구하여 제3차 경제개발 5개년 계획기간 ($1972{\sim}1976$)에 21만정보의 농경지를 조성하므로서 조국의 근대화에 이바지하고져 기계개간의 새로운 작업체계와 숙지화촉진에 관한 연구를 하게되어 다음과 같은 사실들을 알게 되었다. (1) 토지경사도 $10^{\circ}$정도는 계단전개간보다 원지형개간을 하는 것이 개간작업이나 영농작업에 유리하다. (2) 개간작업에서 잡초를 태우거나 청소하지 않고 가급적 표토에 혼입함으로서 유기물을 공급하고 토양을 팽연하게 하였다. (3) 개간작업은 불도우저, 트랙터, 해로우 자동경운기, 로오타리 틸러등 여러 가지 장비를 갖추어야 일관성있는 작업을 할 수 있다. (4) 발근작업은 나무뿌리가 땅속에 뻗어있는 모양에 관계가 있는 것으로 직근계, 측근계, 사근계 중 직근계가 뽑기 어려웠다. (5) 주름잡이구(IV)의 개간작업이 발근과 첫갈이가 확실하며 쇠토작업도 간단히 처리되었다. (6) 운토량은 $240m^3/10a$로 표준구보다 15.6%정도 증가하였으나 개간작업시간은 2시15분45초/10a로 표준구의 1/3정도 걸렸다. 즉 2/3나 단축되었다. (7) 디스크 해로우잉(쇠토작업)은 기경지(旣耕地)쇠토작업에 비하여 작업시간이 50%증가하여 15분/10a 걸렸다. (8) 토오타리 틸링은 작업시간이 기경지에 비하여 2.4배나 증가하여 1시47분43초/10a이었다. 그 까닭은 심토(心土)의 쇠토작업이 어려웠기 때문이다. (9) 개간지는 토성에 맞추어 비료를 투입하여야 한다. 특히 퇴비는 1,200kg/10a. 석회는 20kg/10a 이상 투입할 것이다. 그리고 퇴비생산을 위하여 앞으로 채초지(採草地)가 필요하게 되었다. (10) 목초재배시험은 현재 재배중이어서 아직 그 결과를 알 수 없으나 개간효과와 숙지화정도가 밝혀질 것으로 기대된다.

  • PDF

감 과실(果實)의 물리성(物理性)및 이탈특성(離脫特性) (Physical Properties and Detachment Characteristics of Persimmon Fruit)

  • 김태한
    • Current Research on Agriculture and Life Sciences
    • /
    • 제3권
    • /
    • pp.62-69
    • /
    • 1985
  • 기계적(機械的)인 과실(果實) 수확장치(收穫裝置)를 개발(開發)하기 위해서는 과실(果實) 일과경계(一果梗系)의 이탈특성(離脫特性) 및 물리적(物理的) 성질(性質)을 구명(究明)할 필요(必要)가 있다. 따라서 본(本) 연구(硏究)는 재래품종(在來品種)인 청도반시를 대상(對象)으로 하여 작용력(作用力)의 변화(變化)에 따란 과실(果實)-과경계(果梗系)의 이탈력(離脫力)과 이탈형태(離脫形態) 그리고 이탈(離脫) Torque를 측정(測定)하였으며 그 결과(結果)는 다음과 같다. 과실(果實)-과경계(果梗系)의 이탈형태(離脫形態)는 과실(果實)이 성숙(成熟)해짐에 따라 꽃받침으로부터 과경(果梗)이 빠져나가는 형태(形態)가 많이 나타났으며 과경축(果梗軸)에 대(對)하여 외력(外力)을 가(加)하는 각도(角度)를 $0^{\circ}$에서 $90^{\circ}$까지 증가(增加)시킴에 따라 감 과실(果實)의 기계(機械) 수확시(收穫時) 목표(目標)라고 할 수 있는 과경(果梗)과 꽃받침의 접합점(接合點)에서의 이탈형태(離脫形態)는 증가(增加)하는 반면(反面) 과경(果梗)이 결과지(結果枝)의 일부(一部)를 부착(附着)한 채 파괴(破壞)되는 형태(形態)는 감소(減少)하였다. 감 과실(果實)의 이탈력(離脫力)은 최대(最大) 13kg에서 최소(最小) 5kg정도(程度)였으며 과실(果實)이 성숙(成熟)해짐에 따라 최대(最大) 47%에서 최소(最小) 8%까지 감소(減少)하였고, 과경축(果梗軸)에 대(對)하여 외력(外力)을 가(加)하는 각도(角度)를 $0^{\circ}$에서 $90^{\circ}$까지 증가(增加)시킴에 따라 성숙도(成熟度) 별(別)로 최대(最大) 31%에서 최소(最小) 24%까지 감소(減少)하였다. 과실(果實)의 이탈력(離脫力)과 중량(重量)과의 비(比)(F/w)는 최대(最大) 130에서 최소(最小) 54정도(程度)였으며 과실(果實)이 성숙(成熟)해짐에 따라 최대(最大) 36%에서 최소(最小) 8%까지 감소(減少)하였고 과경축(果徑軸)에 대(對)하여 외력(外力)을 가(加)하는 각도(角度)를 $0^{\circ}$에서 $90^{\circ}$까지 증가(增加)시킴에 따라 성숙도(成熟度) 별(別)로 최대(最大) 49%에서 최소(最小) 33%까지 감소(減少)하였다. 과수(果樹)로부터 과실(果實)을 이탈(離脫)시키기 위해서는 과실(果實)-과경계(果梗系)에 최대(最大) 1,280kg에서 최소(最小) 530kg정도(程度)까지의 형계력(衡繫力)을 가(加)하는 것이 필요(必要)하였다. 과실(果實)의 이탈(離脫)에 필요(必要)한 Torque의 범위(範圍)는 $1.1{\sim}0.5kg{\cdot}cm$ 정도(程度)였다.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

천연 항균물질 미세천공필름 포장이 송이토마토의 품질에 미치는 영향 (Effect of Antimicrobial Microperforated Film Packaging on Extending Shelf Life of Cluster-type Tomato (Lycopersicon esculentum Mill.))

  • 이윤석;이영은;이정수;김영식
    • 원예과학기술지
    • /
    • 제29권5호
    • /
    • pp.447-455
    • /
    • 2011
  • 본 연구는 수확 후 송이토마토의 품질 유지를 확보하기 위하여 포장 내부의 적정 산소와 이산화탄소 농도를 유지하고 천연항균물질을 적용하여 과채류의 호흡장해 및 부패 미생물의 발생을 억제하는 효과를 얻고자 하였다. 이를 위하여 천연항균물질이 코팅된 미세천공필름으로 포장한 송이 토마토의 저장 중 품질변화 효과를 관찰하였다. 송이토마토 곰팡이균 발생 억제를 위한 계피유, 클로브유, 및 클라리 세이지유의 천연항균물질들의 항균성 평가는 계피유에서 가장 높은 항균성을 보여주었다. 천연항균물질이 코팅된 미세 천공필름의 산소 투과도는 무처리 미세천공필름과 비교하였을 때 유의적인 차이는 없었으며, 각 포장필름의 물리적 특성 평가에서 항균물질 코팅된 필름의 인장강도와 신장률 값은 무처리 및 미세천공필름 값과 비교하여 유사한 값을 나타냈다. 10% 계피유가 코팅된 항균미세천공필름(AMP30), 무처리 미세천공필름(MP10, MP30), 그리고 일반 OPP필름으로 포장한 송이토마토의 포장재 내 기체조성 평가는 MP30과 AMP30필름에서 송이토마토의 적정 선도유지를 위한 기체조성 조건인 각각 5.0와 4.8% 산소 농도 그리고 4.3와 4.4% 이산화탄소 농도를 유지하는 것을 관찰할 수 있었다. 또한 $15^{\circ}C$의 저장성 평가 실험에서 항균미세천공필름(AMP30)이 다른 필름포장재보다 송이토마토의 경도, 중량 감소, 그리고 부패 현상을 억제하는데 효과적인 결과를 나타냈다. 따라서 계피유가 처리된 천연항균 특성을 가진 미세천공필름 적용은 신선 송이토마토의 품질 개선에 효과적인 방법인 것으로 판단된다.

현대회화에서의 형태와 물질 -Digital Transfiguration에 관한 연구- (Digital painting: Image transfonnation, simulation, heterologie and transfonnation)

  • 정숙영
    • 조형예술학연구
    • /
    • 제10권
    • /
    • pp.161-181
    • /
    • 2006
  • The words which appeared in my theoretical study and work are image transformation to digital painting, simulation, heterologie and transfiguration, etc. Firstly, let's look into 'digital era' or 'new media era'. Nowadays, the image world including painting within the rapid social and cultural change, which is called as digital era, is having the dramatic change. Together with the development of scientific technology, large number of events which was deemed to be impossible is happening as real in image world Moreover, these changes in image world is greatly influencing to our life. The word which compresses this change of image world and shows is 'digital'. Digit, which means fingers in Latin, indicates separately changing signal, and to be more narrow, it indicates the continual signal of '0' and ' 1' in computer. The opposite word is 'analogue'. As analogue is the word meaning 'infer' or 'similarity', it indicates the signal or form which continuously changes along the series of time when it is compared to digital. Instead of analogue, digital is embossed as a major ruler along the whole area of our current culture. In whole culture and art area, and in whole generalscience, digital is appearing as it has the modernism and importance. The prefix, 'digital', e.g. digital media, digital culture, digital design, digital philosophy, etc, is treated as the synonym of modernism and something new. This advent of digital results the innovative change to the image world, creates the new beauty experience which we could not experience before, and forecasts the formation of advanced art and expansion of creative area. Various intellectual activities using computer is developing the whole world with making the infrastructure. Computer in painting work immediately accomplishes the idea of painters, takes part in simulation work, contingency such as abrupt reversal, extraction, twisting, shaking, obscureness, overlapping, etc, and timing to stimulate the creativity of painters, and provides digital formative language which enables new visual experience to the audience. When the change of digital era, the image appeared in my work is shown in 'transfiguration' like drawing. The word, 'transfiguration' does not indicate the completed and fixed real substance but indicate endlessly moving and floating shape. Thus, this concept is opposite to the substantial consideration, so that various concepts which is able to replace this in accordance with the similar cases are also exist such as change, deterioration, mutation, deformity of appearance and morphing which is frequently used in computer as a technical word. These concepts are not clearly classified, and variably and complicatedly related. Transfiguration basically means the denial of "objectivity' and '(continual) stagnation' or deviation from those. This phenomenon is appeared through the all art schools of art ever since the realism is denied in the 19th century. It is called as 'deformation' in case of expressionism, futurism, cubism, etc, in the beginning of the century, which its former indication is mostly preserved within the process of structural deviation and which has the realistic limit which should be preserved. On the contrary, dramatic transfiguration which has been showing in the modern era through surrealism is different in the point that dramatic transfiguration tends to show the deterioration and deviation rather than the preservation of indicated object. From this point, transfiguration coming out from morphing using computer deteriorates and hides the reality and furthermore, it replaces the 'reality'. Moreover, transfiguration is closely approached to the world of fake or 'imaginary' simulation world of Baudrillard. According to Baudrillard, the image hides and deteriorates the reality, and furthermore, expresses 'not existing' to 'imaginary' under the name of transfiguration. Certain reality, that is, image which is absent from the reality is created and overflowed, so that it finally replaces the reality. This is simulation as it is said by Baudrillard. In turn, Georges Bataille discusses about the image which is produced by digital technology in terms of heterologie. Image of heterologie is the visual signal which is established with the media. Image of media is to have the continuous characteristics of produce, extinction, and transformation, and its clear boundary between images becomes meaningless. The meaning of composition, excess, violation, etc of digital image is explained to heterological study or heteologie suggested as important meaning of Georges Bataille who is a heretic philosopher. As the form and image of mutation shows the shape in accordance with mechanical production, heterologie is introduced as very low materialism (or bas materialisme), in this theory. Heterologie as low materialism which is gradually changing is developing as a different concept and analysis because of the change of time in the late 20s century beside high or low meaning. Including my image, all images non-standardizes and transforms the code. However, reappearance and non-standardization of this code does not seem to be simple. The problem of transformation caused by transfiguration which appears in my digital drawing painting, simulation, heterologie, etc, are the continual problems. Moreover, the subject such as existence of human being, distance from the real life, politics and social problems are being extended to actual research and various expressing work. Especially, individual image world is established by digital painting transfiguration technique, and its change and review start to have the durability. The consciousness of observers who look at the image is changing the subject. Together with theoretical research, researchers are to establish the first step to approach to various image change of digital era painting through transfiguration technique using our realistic and historical image.

  • PDF