• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.4
• /
• pp.400-403
• /
• 2011

This experiment was carried out to determine the effect of mechanization on lavor-saving in sweetpotato cultivation. The field experiment was conducted from 2005 to 2006 in Mokpo Experiment Station of the National Institute of Crop Science. In order to determine the efficiency of mechanical harvesting, different harvesting methods were compared. Mechanical harvesting method was done as follows: cutting of vines by machine, removal of plastic film mulching, and harvesting by two-row and one-row harvesting system. The result showed harvesting labor was decreased by 66.6% in two-row harvesting. The ratio of damaged sweetpotato by mechanical harvesting decreased by 49.4% in two-row and 38.4% in one-row harvesting compared to conventional method. The total labor cost was saved by 48.2% - 70.4% using mechanical method. In addition, the total income also increased by ca. 62.9% - 81.2%. Thus, it was concluded that mechanical harvesting is more efficient and economical method than conventional one.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.2
• /
• pp.3772-3777
• /
• 1975

This paper reports on the analysis of the distributions of probable days being good for mechanical rice harvesting and the method of determining the capacity of rice harvesting machinery for the given harvesting duration. In the analysis of the probability distribution of days being good for rice harvesting, the daily rainfalls above which mechanical field work may be impracticable were specified and their frequency of occurances was analyzed by using the weather records during past twenty-one years measured at five different locations. The conclusions being drawn from the analysis are as follows: 1. The distributions of probable workable days in different region and harvesting duration are very distinct and are different to set a uniform trend (refer to Fig. 1-4). 2. The occurance of probable days being good for mechanical field work under 66% confidence level are quite variable by region and by ten-day period. The analysis indicates that the probable workable days may range from 7.5 to 8.5 days of 10-day span within optimum harvesting duration (refer to Table 1). 3. Based on the probability distributions analyzed, the optimun capacities of harvesting machinery required for different harvesting areas and harvesting start-date were estimated as a function of operating duration (refer to Fig. 5 and Table 2)

• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.811-821
• /
• 2023

This study investigated the storability of onions according to manual and mechanical harvesting. Moreover, we simulated the onion-to-onion impact during the mechanical harvesting process and investigated the storability after artificially subjecting the onions to impact treatment. The onion harvesting methods included hand plucking + manual collection, digger + manual, and digger + mechanical collection. The maximum impact height during the mechanical harvesting process was 0.5 m. Immediately after harvesting, no significant difference in the bruise and wound rate among the harvesting methods was observed. Any increased bruise or wound rate because of mechanical harvesting was presumed to be influenced by soil conditions, such as the presence of gravel, and machine operation factors. Furthermore, the storability during the 8.5 months storage showed no significant difference according to the harvesting methods. In treatments by simulating the impacts during the mechanical harvesting process, the impact heights were 0.0 m (0.0 J), 0.25 m (0.86 J), 0.5 m (1.72 J), and 0.75 m (2.57 J), each performed once, and four times at the same position (3.43 J) and four times at different positions (3.43 J) at 0.25 m. Throughout all the treatments, there were no significant differences in the storability during the 8.5 months storage period.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.367-372
• /
• 2010

Consumption of pepper, a major spice vegetable used for seasoning Kimchi, continues to increase, but cultivation is in decline due to shortage of rural labor in Korea. The 39.2% of total labor requirement for conventional pepper cultivation was available for harvesting work. Therefore conventional manual harvesting should be turned to mechanical harvesting for labor-saving, cost-reducing and easy work. Surveys on conventional pepper cultivation patterns, labor requirements for various pepper cultivation works, and farmers' opinions on the mechanization of pepper harvesting were conducted to obtain basic informations. The labor requirement for pepper harvesting was 954 h/ha out of a total labor requirement of 2,436 h/ha for pepper cultivation. Harvesting was the hardest work, and hiring workmen for harvesting was also difficult. Farmers preferred to develop a small-scale pepper harvester using agricultural tractor or cultivar. Most farmer agreed to change cultivation pattern for mechanization of pepper harvesting, but hesitated to adopt new one-time-harvesting pepper varieties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.7-12
• /
• 2009

Mungbean should be harvested several times according to its physiological characteristics and weather conditions of cultivation region. In Korea, mungbean is usually sown in June and harvested three or four times, and the cultivated area is being rapidly reduced. Therefore, the author developed cultivation techniques of mechanical harvesting suitable for the weather conditions of the southern part of the Korean peninsula. The optimum sowing time of mungbean for mechanical harvesting in southern part of Korea is around July 20. When sown around July 15, mungbean should be harvested twice and then the mechanical harvesting of mungbean was not possible. Meanwhile, when sown after July 25, the mechanical harvesting was possible but the maturing period was longer and the seed yield was decreased. Therefore, it is safe to say that in Korea the mechanical harvesting of mungbean is possible for the middle part of Korea when the plant is sown before July 20 and for the southern coastal region of Korea when sown after July 20 (if July 20 is set up as the baseline for the southern part of Korea). Out of Keumseong and Owool, which are popularized cultivars in Korea most, Owool is determined to be most appropriate for mechanical harvesting. Owool is favorable for mechanical harvesting because, when compared to Keumseong, it is higher both in plant height and in pod height, and also the seed yield is better.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.213-218
• /
• 2023

Triboelectric nanogenerators (TENGs) have emerged as a highly promising energy harvesting technology capable of harnessing mechanical energy from various environmental vibrations. Their versatility in material selection and efficient conversion of mechanical energy into electric energy make them particularly attractive. TENGs can serve as a valuable technology for self-powered sensor operation in preparation for the IoT era. Additionally, they demonstrate potential for diverse applications, including energy sources for implanted medical devices (IMDs), neural therapy, and wound healing. In this review, we summarize the potential use of this universally applicable triboelectric energy harvesting technology in the disinfection and blocking of pathogens. By integrating triboelectric energy harvesting technology into human clothing, masks, and other accessories, we propose the possibility of blocking pathogens, along with technologies for removing airborne or waterborne infectious agents. Through this, we suggest that triboelectric energy harvesting technology could be an efficient alternative to existing pathogen removal technologies in the future.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.294-303
• /
• 2016

Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

• International Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.47-52
• /
• 2015

The transient phenomenon of self-powered energy-harvesting is assessed using a bond-graph method. The bond-graph is an energy-based approach to describing physical-dynamic systems. It shows power flow graphically, which helps us understand the behavior of complicated systems in simple terms. Because energy-harvesting involves conversion of power in mechanical form to the electrical one, the bond-graph is a good tool to analyze this power flow. Although the bond-graph method can be used to calculate the dynamics of combining mechanical and electrical systems simultaneously, it has not been used for harvesting analysis. We demonstrate the usability and versatility of bond-graph for not only steady analysis but also transient analysis of harvesting.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.523-530
• /
• 2015

Electricity generation through fossil fuels has caused environmental pollution. To solve this problem, research on new renewable energy (solar, wind, geothermal heat, etc.) to replace fossil fuels is in progress. These devices are able to consistently generate power. However, they have many drawbacks, such as high installation costs and limitations in possible set-up environments. Thus, piezoelectric harvesting technology, which is able to overcome the limitations of existing energy technologies, is actively being studied. Piezoelectric harvesting technology uses the piezoelectric effect which occurs in crystals that generate voltage when stress is applied. Therefore, it has advantages such as a wider installation base and lower technological cost. In this study, a piezoelectric energy harvesting device based on constant wave motion was investigated. This device can regenerate electricity in a constant turbulent flow in the middle of the sea. The components of the device are circuitry, a steel bar, an bimorph piezoelectric element and buoyancy elements. In addition, a multiphysical analysis coupled with the structure and piezoelectric elements was conducted to estimate the performance of the device. With this piezoelectric energy harvesting device, the displacement and electric power were analyzed.

• Smart Structures and Systems
• /
• v.19 no.4
• /
• pp.403-413
• /
• 2017

The present article encompasses a nonlinear finite element (FE) and genetic algorithm (GA) based optimal vibration energy harvesting from nonprismatic piezo-laminated cantilever beams. Three cases of cross section profiles (such as linear, parabolic and cubic) are modelled to analyse the geometric nonlinear effects on the output responses such as displacement, voltage, and power. The simultaneous effects of taper ratios (such as breadth and height taper) on the output power are also studied. The FE based nonlinear dynamic equation of motion has been solved by an implicit integration method (i.e., Newmark method in conjunction with the Newton-Raphson method). Besides this, a real coded GA based constrained optimization scheme has also been proposed to determine the best set of design variables for optimal harvesting of power within the safe limits of beam stress and PZT breakdown voltage.