• 제목/요약/키워드: mechanical design

Search Result 15,364, Processing Time 0.043 seconds

Influence of varying cement types and abutment heights on pull-off force of zirconia restorations (시멘트의 종류 및 임플란트 지대주 높이가 지르코니아 수복물의 제거력에 미치는 영향)

  • Yeong-Jun Jung;Yu-Lee Kim;Ji-Hye Jung;Nae-Un Kang;Hyun-Jun Kong
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.40 no.2
    • /
    • pp.64-71
    • /
    • 2024
  • Purpose: The purpose of this study is to evaluate Ti-base abutment's three different heights and three different cement types on the pull-off force of zirconia-based restorations. Materials and Methods: A total of 90 fixture lab analogs were embedded in auto polymerizing resin bloack. 90 Ti-base abutments heights of 3 mm, 5 mm, 7 mm were scanned and zirconia restoration were prepared from scanned files. Zirconia restoration were cemented with three different types of cements (temporary, semi-permanent, permanent) following manufacturer's instructions. All 90 specimens were placed and tested in a universal testing machine for pull-out testing. Retention was measured by recording the force at load drop. Statistical analysis was performed using Kruskal-Wallis test for detecting whether there are any statistical significance along cement types or abutment heights. After that, Mann-Whitney test was used for figuring out differences regarding abutment height and the comparison between 3 cements. Results: Temp bond showed significantly lower pull-off force compared to Fujicem regardless of any abutment height. However, there were significant differences between Cem-implant and Fujicem in abutment height of 3 mm and 7 mm, but there was no significant difference in 5 mm. Temp bond and Cem-implant had significant differences only in abutment height of 5 mm. Conclusion: Although Ti-base abutment height did not influenced zirconia restorations' retentiveness, cement types showed significant differences.

Numerical and experimental investigations on the aerodynamic and aeroacoustic performance of the blade winglet tip shape of the axial-flow fan (축류팬 날개 끝 윙렛 형상의 적용 유무에 따른 공기역학적 성능 및 유동 소음에 관한 수치적/실험적 연구)

  • Seo-Yoon Ryu;Cheolung Cheong;Jong Wook Kim;Byeong Il Park
    • The Journal of the Acoustical Society of Korea
    • /
    • v.43 no.1
    • /
    • pp.103-111
    • /
    • 2024
  • Axial-flow fans are used to transport fluids in relatively low-pressure flow regimes, and a variety of design variables are employed. The tip geometry of an axial fan plays a dominant role in its flow and noise performance, and two of the most prominent flow phenomena are the tip vortex and the tip leakage vortex that occur at the tip of the blade. Various studies have been conducted to control these three-dimensional flow structures, and winglet geometries have been developed in the aircraft field to suppress wingtip vortices and increase efficiency. In this study, a numerical and experimental study was conducted to analyze the effect of winglet geometry applied to an axial fan blade for an air conditioner outdoor unit. The unsteady Reynolds-Averaged Navier-Stokes (RANS) equation and the FfocwsWilliams and Hawkings (FW-H) equation were numerically solved based on computational fluid dynamics techniques to analyze the three-dimensional flow structure and flow noise numerically, and the validity of the numerical method was verified by comparison with experimental results. The differences in the formation of tip vortex and tip leakage vortex depending on the winglet geometry were compared through a three-dimensional flow field, and the resulting aerodynamic performance was quantitatively compared. In addition, the effect of winglet geometry on flow noise was evaluated by numerically simulating noise based on the predicted flow field. A prototype of the target fan model was built, and flow and noise experiments were conducted to evaluate the actual performance quantitatively.

Effect of the initial imperfection on the response of the stainless steel shell structures

  • Ali Ihsan Celik;Ozer Zeybek;Yasin Onuralp Ozkilic
    • Steel and Composite Structures
    • /
    • v.50 no.6
    • /
    • pp.705-720
    • /
    • 2024
  • Analyzing the collapse behavior of thin-walled steel structures holds significant importance in ensuring their safety and longevity. Geometric imperfections present on the surface of metal materials can diminish both the durability and mechanical integrity of steel shells. These imperfections, encompassing local geometric irregularities and deformations such as holes, cavities, notches, and cracks localized in specific regions of the shell surface, play a pivotal role in the assessment. They can induce stress concentration within the structure, thereby influencing its susceptibility to buckling. The intricate relationship between the buckling behavior of these structures and such imperfections is multifaceted, contingent upon a variety of factors. The buckling analysis of thin-walled steel shell structures, similar to other steel structures, commonly involves the determination of crucial material properties, including elastic modulus, shear modulus, tensile strength, and fracture toughness. An established method involves the emulation of distributed geometric imperfections, utilizing real test specimen data as a basis. This approach allows for the accurate representation and assessment of the diversity and distribution of imperfections encountered in real-world scenarios. Utilizing defect data obtained from actual test samples enhances the model's realism and applicability. The sizes and configurations of these defects are employed as inputs in the modeling process, aiding in the prediction of structural behavior. It's worth noting that there is a dearth of experimental studies addressing the influence of geometric defects on the buckling behavior of cylindrical steel shells. In this particular study, samples featuring geometric imperfections were subjected to experimental buckling tests. These same samples were also modeled using Finite Element Analysis (FEM), with results corroborating the experimental findings. Furthermore, the initial geometrical imperfections were measured using digital image correlation (DIC) techniques. In this way, the response of the test specimens can be estimated accurately by applying the initial imperfections to FE models. After validation of the test results with FEA, a numerical parametric study was conducted to develop more generalized design recommendations for the stainless-steel shell structures with the initial geometric imperfection. While the load-carrying capacity of samples with perfect surfaces was up to 140 kN, the load-carrying capacity of samples with 4 mm defects was around 130 kN. Likewise, while the load carrying capacity of samples with 10 mm defects was around 125 kN, the load carrying capacity of samples with 14 mm defects was measured around 120 kN.

The Buildability and Strength Properties of 3D Printed Concrete in the Air and Underwater Environment (수중과 기중환경에서 출력된 3D 프린팅 콘크리트의 적층성능 및 강도 특성 분석)

  • Eun-A Seo;Ho-Jae Lee
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.28 no.2
    • /
    • pp.35-42
    • /
    • 2024
  • This study evaluated the buildability and mechanical properties of 3DP concrete printed in air and underwater environments. Buildability was evaluated by green strength test on fresh concrete and height and deflection immediately and 1 hour after printing. The green compressive strength of the concrete was 5.0 kPa after 30 minutes and 7.9 kPa after 3 hours, an increase of 1.6 times the initial strength. The total height of the laminated parts met the design height regardless of the printing environment. The amount of deflection in air and under water 1 hour after printing was 1 mm and 0.2 mm, respectively, indicating a small amount of deflection under water. The apparent density of the sample appeared in the order of A-M > A-P > UW-P. This is believed to be because a large amount of air is mixed into the concrete during the printing process, and water infiltrates during the underwater printing process. The compressive strength ratio of UW-P/A-P was 0.86 at 1 day, but the compressive strength of the underwater printed concrete was high from 7 days.

In-pile tritium release behavior and the post-irradiation experiments of Li4SiO4 fabricated by melting process

  • Linjie Zhao;Mao Yang;Chengjian Xiao;Yu Gong;Guangming Ran;Xiaojun Chen;Jiamao Li;Lei Yue;Chao Chen;Jingwei Hou;Heyi Wang;Xinggui Long;Shuming Peng
    • Nuclear Engineering and Technology
    • /
    • v.56 no.1
    • /
    • pp.106-113
    • /
    • 2024
  • Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li4SiO4 pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li4SiO4 made by melt spraying method at 467 ℃ is approximately 23.34 h. High-density Li4SiO4 pebbles exhibit tritium release at relatively low temperatures (<600 ℃) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ℃ and 550 ℃ is 1.19 × 10-11 cm2/s and 5.34 × 10-11 cm2/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

A Study on Movement of the Free Face During Bench Blasting (전방 자유면의 암반 이동에 관한 연구)

  • Lee, Ki-Keun;Kim, Gab-Soo;Yang, Kuk-Jung;Kang, Dae-Woo;Hur, Won-Ho
    • Explosives and Blasting
    • /
    • v.30 no.2
    • /
    • pp.29-42
    • /
    • 2012
  • Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.

Applying an IPA(Importance-Performance Analysis) Model to Comparative Study on the Elementary School Students' Parents' Crime Prevention Design Element(CPTED) Awareness for Crime Prevention (범죄예방을 위한 초등학교 학부모의 범죄예방설계(CPTED)요소 인식에 관한 비교 연구: IPA(중요도-실행도 분석)기법을 중심으로)

  • Choi, Hyun-Sick
    • Korean Security Journal
    • /
    • no.40
    • /
    • pp.209-242
    • /
    • 2014
  • This study is to understand sure the primary crime prevention has been incidence as a social problem intended for parents through the analysis of the Crime Prevention Design (CPTED) CPTED element of recognize elements that target crime prevention strategy to effectively help students be and an object of the present invention is to provide a policy suggestion haryeoneunde proposed basic data required for orientation. To achieve the study objectives such as the core framework in this study IPA: Importance-Performance Analysis) also was selected. Subjects of study in 2010 Gyeongju Elementary parents name and were 203 first research group investigating the secondary school population of the region in 2014 to nomadic parents of 297 people sampled selection. Questionnaire that use by this study applies "Important-Performance Analysis : IPA" technique that Martilla & James(1977) presented and analyzed awareness for CPTED elements of strategy for student's crime prevention to elementary school pupil students' parentse. It was the first group, 0.886, 0.920, 0.895 and 2nd group 0.880, 0.906, 0.878 that reliability of (Cronbach' s ${\alpha}$) the importance, and believability of run chart was the first group, 0.880, 0.917, 0.878 and 2nd group, 0.735, 0.840, 0.830. Analysis of the data carried out frequency analysis, reliability analysis, Frequency analysis was performed, paired sample t-Test for the reliability analysis, and the technical statistical analysis of the data is. The analysis of lattice bars execution through the IPA, the importance of the primary parents elements of CPTED strategies are generally very high, but found that the variation depending on the components that Performance. This study, an important element of the strategy to eliminate the school building for students from inside and outside the criminal fears CPTED is a mechanical surveillance in the first group, organizational surveillance, and the second group is the region intensified I'll showed mechanically and organizational factors in the investigation, and request that the investment is urgently important element is also execution low, crime prevention personnel security higher importance than expanding the front door. The analysis result of this study expects that basic data can be used in policy direction presentation that examines closely CPTED elements of strategy for crime prevention of students and applies CPTED's component effectively at elementary school hereafter.

  • PDF

Digital painting: Image transfonnation, simulation, heterologie and transfonnation (현대회화에서의 형태와 물질 -Digital Transfiguration에 관한 연구-)

  • Jeong, Suk-Yeong
    • Journal of Science of Art and Design
    • /
    • v.10
    • /
    • pp.161-181
    • /
    • 2006
  • The words which appeared in my theoretical study and work are image transformation to digital painting, simulation, heterologie and transfiguration, etc. Firstly, let's look into 'digital era' or 'new media era'. Nowadays, the image world including painting within the rapid social and cultural change, which is called as digital era, is having the dramatic change. Together with the development of scientific technology, large number of events which was deemed to be impossible is happening as real in image world Moreover, these changes in image world is greatly influencing to our life. The word which compresses this change of image world and shows is 'digital'. Digit, which means fingers in Latin, indicates separately changing signal, and to be more narrow, it indicates the continual signal of '0' and ' 1' in computer. The opposite word is 'analogue'. As analogue is the word meaning 'infer' or 'similarity', it indicates the signal or form which continuously changes along the series of time when it is compared to digital. Instead of analogue, digital is embossed as a major ruler along the whole area of our current culture. In whole culture and art area, and in whole generalscience, digital is appearing as it has the modernism and importance. The prefix, 'digital', e.g. digital media, digital culture, digital design, digital philosophy, etc, is treated as the synonym of modernism and something new. This advent of digital results the innovative change to the image world, creates the new beauty experience which we could not experience before, and forecasts the formation of advanced art and expansion of creative area. Various intellectual activities using computer is developing the whole world with making the infrastructure. Computer in painting work immediately accomplishes the idea of painters, takes part in simulation work, contingency such as abrupt reversal, extraction, twisting, shaking, obscureness, overlapping, etc, and timing to stimulate the creativity of painters, and provides digital formative language which enables new visual experience to the audience. When the change of digital era, the image appeared in my work is shown in 'transfiguration' like drawing. The word, 'transfiguration' does not indicate the completed and fixed real substance but indicate endlessly moving and floating shape. Thus, this concept is opposite to the substantial consideration, so that various concepts which is able to replace this in accordance with the similar cases are also exist such as change, deterioration, mutation, deformity of appearance and morphing which is frequently used in computer as a technical word. These concepts are not clearly classified, and variably and complicatedly related. Transfiguration basically means the denial of "objectivity' and '(continual) stagnation' or deviation from those. This phenomenon is appeared through the all art schools of art ever since the realism is denied in the 19th century. It is called as 'deformation' in case of expressionism, futurism, cubism, etc, in the beginning of the century, which its former indication is mostly preserved within the process of structural deviation and which has the realistic limit which should be preserved. On the contrary, dramatic transfiguration which has been showing in the modern era through surrealism is different in the point that dramatic transfiguration tends to show the deterioration and deviation rather than the preservation of indicated object. From this point, transfiguration coming out from morphing using computer deteriorates and hides the reality and furthermore, it replaces the 'reality'. Moreover, transfiguration is closely approached to the world of fake or 'imaginary' simulation world of Baudrillard. According to Baudrillard, the image hides and deteriorates the reality, and furthermore, expresses 'not existing' to 'imaginary' under the name of transfiguration. Certain reality, that is, image which is absent from the reality is created and overflowed, so that it finally replaces the reality. This is simulation as it is said by Baudrillard. In turn, Georges Bataille discusses about the image which is produced by digital technology in terms of heterologie. Image of heterologie is the visual signal which is established with the media. Image of media is to have the continuous characteristics of produce, extinction, and transformation, and its clear boundary between images becomes meaningless. The meaning of composition, excess, violation, etc of digital image is explained to heterological study or heteologie suggested as important meaning of Georges Bataille who is a heretic philosopher. As the form and image of mutation shows the shape in accordance with mechanical production, heterologie is introduced as very low materialism (or bas materialisme), in this theory. Heterologie as low materialism which is gradually changing is developing as a different concept and analysis because of the change of time in the late 20s century beside high or low meaning. Including my image, all images non-standardizes and transforms the code. However, reappearance and non-standardization of this code does not seem to be simple. The problem of transformation caused by transfiguration which appears in my digital drawing painting, simulation, heterologie, etc, are the continual problems. Moreover, the subject such as existence of human being, distance from the real life, politics and social problems are being extended to actual research and various expressing work. Especially, individual image world is established by digital painting transfiguration technique, and its change and review start to have the durability. The consciousness of observers who look at the image is changing the subject. Together with theoretical research, researchers are to establish the first step to approach to various image change of digital era painting through transfiguration technique using our realistic and historical image.

  • PDF

A Study on Mobile Antenna System Design with Tri-band Operation for Broadband Satellite Communications and DBS Reception (광대역 위성 통신/방송용 삼중 대역 이동형 안테나 시스템 설계에 관한 연구)

  • Eom Soon-Young;Jung Young-Bae;Son Seong-Ho;Yun Jae-Seung;Jeon Soon-Ick
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.5 s.108
    • /
    • pp.461-475
    • /
    • 2006
  • In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

Design Factor Analysis of End-Effector for Oriental Melon Harvesting Robot in Greenhouse Cultivation (시설재배 참외 수확 로봇용 엔드이펙터의 설계 요인 분석)

  • Ha, Yu Shin;Kim, Tae Wook
    • Journal of Bio-Environment Control
    • /
    • v.22 no.3
    • /
    • pp.284-290
    • /
    • 2013
  • This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.