• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.1159-1175
• /
• 2015

In this study, the effect of temperature variation on the wireless impedance monitoring is analyzed for the tendon-anchorage connection of the prestressed concrete girder. Firstly, three impedance features, which are peak frequency, root mean square deviation (RMSD) index, and correlation coefficient (CC) index, are selected to estimate the effects of temperature variation and prestress-loss on impedance signatures. Secondly, wireless impedance tests are performed on the tendon-anchorage connection for which a series of temperature variation and prestress-loss events are simulated. Thirdly, the effect of temperature variation on impedance signatures measured from the tendon-anchorage connection is estimated by the three impedance features. Finally, the effect of prestress-loss on impedance signatures is also estimated by the three impedance features. The relative effects of temperature variation and prestress-loss are comparatively examined.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.279-285
• /
• 2018

A shear connection between the steel beam and concrete slab determines the stability of composite beams. An extensive numerical study to evaluate the resistance of the shear connection in a solid slab at high temperature was conducted. Three-dimensional thermo-mechanical finite element models were developed using a dynamic explicit method and concrete damaged plasticity model. Temperature-dependent plasticity parameters of the concrete model were proposed, and the accuracy of the developed model was obtained against experimental data. This investigation has revealed that a stud shearing failure occurs regardless of temperatures, and its shearing location changes in accordance with a rise in temperature. A new strength reduction formula has been presented to estimate the resistance of the shear connection at high temperatures.

• 대한치과보철학회지
• /
• 제54권2호
• /
• pp.110-119
• /
• 2016

목적: 본 연구는 임플란트 지대주의 체결부 길이와 골정에 대한 고정체 상단의 위치에 따라서, 하중 적용 시 고정체, 지대주, 나사 및 골에서의 응력 분포에 어떤 변화가 나타나는지 평가해 보고자 하였다. 재료 및 방법: 원추형 사면과 육각 기둥 형태의 회전저항구조를 갖는 내측 연결형 임플란트에서 지대주의 체결부 길이가 2.5 mm, 3.5 mm, 4.5 mm인 경우와 각 경우에서 고정체 상단이 골정과 같거나 골정보다 2 mm 상방에 위치할 때를 상정하여, 유한요소분석을 위한 모델을 총 6개 형성하였다. 각 경우에서 170 N의 30도 경사하중을 적용하였다. 결과: 6개의 유한요소분석 모델 모두에서, 임플란트는 고정체와 지대주의 체결 상단 부위에서, 주위 골에서는 골정 부근에서 최대 응력 값을 나타냈다. 지대주의 체결부 길이가 길어질수록, 주어진 하중에서 발생되는 고정체, 지대주, 나사 및 골에서의 최대 응력 값은 줄어들었다. 고정체 상단이 골정과 동일한 높이에 있는 경우보다 골정 2 mm 상방에 위치하는 경우에서 지대주의 체결부 길이가 길어질수록 모든 부위에서 더 큰 비율로 최대 응력 값의 감소를 나타내었다. 결론: 지대주의 체결부 길이가 길어질수록 모든 부위에서 주어진 하중에 따른 최대 응력 값이 줄어드는 것을 알 수 있었고, 임플란트의 기계적 및 생물학적 합병증 예방에 도움이 될 수 있을 것으로 판단된다.

• 한국강구조학회 논문집
• /
• 제27권5호
• /
• pp.447-454
• /
• 2015

원형강관구조 접합부는 재료의 발전과 접합부의 복잡한 국부 거동 때문에 지속적인 연구되고 있다. 이 연구는 지강관에 압축력이 작용하는 원형강관 X-이음 트러스접합부의 주강관 소성화변형과 접합부 강도에 재료강도와 주강관벽세장비가 미치는 영향을 파악하는 것을 목적으로 한다. 이를 위하여 재료강도와 주강관벽세장비를 변수로 하여 다양한 원형강관 X-이음 트러스접합부에 대하여 범용 유한요소해석 프로그램인 ANSYS Mechanical APDL을 사용하여 정밀유한요소해석을 수행하였다. 해석결과를 토대로 현행 건축구조기준에서 제시하는 주강관소성화 한계상태의 접합부 설계강도를 검토하였다. 결론적으로 원형강관 X-이음 트러스접합부 설계에서 고려해야 할 사항을 제시하였다.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.101-113
• /
• 2013

반복적인 하중을 받는 볼트 연결부의 비선형적인 거동을 예측할 수 있는 역학적 고등해석 모델을 개발하는 데 주된 초점을 두어 본 연구를 수행하였다. 또한 대표적인 접합부 형태인 T-stub 접합부의 연결 컴포넌트에 대한 실제의 하중 재하 실험값을 활용한 해석으로 얻어진 거동에 대한 예측의 정확성 및 모형화의 타당성을 입증하였다. 연결부를 이루고 있는 구성요소들의 거동은 볼트의 인장변형, T-stub 플랜지의 휨변형, T-stub 몸체의 신장, 전단볼트의 지압 및 미끄러짐을 포함하며 접합부내에서 개별적인 힘-변위 메커니즘으로부터 정의된 다중 선형의 강성모델에 의하여 재현된다. 이러한 구성요소들은 그들의 거동특성을 지닌 비선형 스프링으로 모형화되어 역학적 해석 모델에 설치되어 연결부 전체의 거동을 수치해석적인 방법으로 예측하도록 한다. 해석 모델에 의한 예측값은 강성, 강도 및 변형 측면에서 실험값과 비교하여 정확성을 평가하였으며 이를 근거로 본 연구에서 제안된 역학적 해석 모델이 볼트 연결부의 거동과 성능을 만족하며 예측 가능하다는 결론을 내렸다.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.281-294
• /
• 2015

Bolted joint connection is the most commonly used connection element in structures and devices. The loosening due to external dynamic loads cannot be observed and measured easily and may cause catastrophic loss especially in an extreme requirement and/or environment. In this paper, an innovative Real-time Cross-Correlation Method (RCCM) for monitoring of the bolted joint loosening was proposed. We apply time reversal process on stress wave propagation to obtain correlation signal. The correlation signal's peak amplitude represents the cross-correlation between the loosening state and the baseline working state; therefore, it can detect the state of loosening. Since the bolt states are uncorrelated with noise, the peak amplitude will not be affected by noise and disturbance while it increases SNR level and increases the measured signals' reliability. The correlation process is carried out online through physical wave propagation without any other post offline complicated analyses and calculations. We implemented the proposed RCCM on a single bolt/nut joint experimental device to quantitatively detect the loosening states successfully. After that we implemented the proposed method on a real large structure (reaction wall) with multiple bolted joint connections. Loosening indexes were built for both experiments to indicate the loosening states. Finally, we demonstrated the proposed method's great anti-noise and/or disturbance ability. In the instrumentation, we simply mounted Lead Zirconium Titanate (PZT) patches on the device/structure surface without any modifications of the bolted connection. The low-cost PZTs used as actuators and sensors for active sensing are easily extended to a sensing network for large scale bolted joint network monitoring.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1167-1173
• /
• 2010

본 논문에서는 가상 트라이아웃 방식을 이용하여 소음기 케이스의 성형에 관한 연구를 수행하였다. 먼저 사각 블랭크로부터 성형 중 변형이 일어나지 않는 부분을 코너컷하여 적정 블랭크를 설계하였고 파이프 삽입부와 어깨 반경부에 발생하는 주름을 방지하기 위해 적정 드로비드를 설계하였다. 마지막으로 파이프 삽입부 주위에 발생하는 주름과 파단을 방지하기 위해 형상비드를 설계하였다. 가상트라이 아웃방식으로 결정된 성형조건에 따라 소음기 케이스의 시제품을 제작하고 해석결과와 비교한 결과 시제품의 성형성, 두께 분포 등이 해석 결과와 잘 일치함을 알 수 있었다.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.547-562
• /
• 2021

This paper aims to explore the mechanical behavior and moment-rotation model of blind bolted joints between concrete-filled double skin steel tubular columns and steel-concrete composite beams. For this type of joint, the inner tube and sandwiched concrete were additionally identified as basic components compared with CFST blind bolted joint. A modified moment-rotation model for this type of connection was developed, of which the compatibility condition and mechanical equilibrium were employed to determine the internal forces of basic components and neutral axis. Following this, load transfer mechanism among the inner tube, sandwiched concrete and outer tube was discussed to assert the action area of the components. Subsequently, assembly processes of basic coefficients in terms of their stiffness and resistances based on the component method by simplifying them as assemblages of springs in series or in parallel. Finally, an experimental investigation on four substructure joints with CFDST columns for validation purposes was carried out to capture the connection details. The predicted results derived from the mechanical models coincided well with the experimental results. It is demonstrated that the proposed mechanical model is capable of evaluating the complete moment-rotation relationships of blind bolted CFDST column composite connections.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.425-436
• /
• 2022

The mechanical behaviors of the prefabricated steel-concrete composite beams are usually affected by the strength and the number of shear studs. Furthermore, the discrete degree of the arrangement for shear stud clusters, being defined as the clustering degree of shear stud λ in this paper, is an important factor for the mechanical properties of composite beams, even if the shear connection degree is unchanged. This paper uses an experimental and calculation method to investigate the influence of λ on the mechanical behavior of the composite beam. Five specimens (with different λ but having the same shear connection degree) of prefabricated composite beams are designed to study the ultimate supporting capacity, deformation, slip and shearing stiffness of composite beams. Experimental results are compared with the conventional slip calculation method (based on the influence of λ) of prefabricated composite beams. The results showed that the stiffness in the elastoplastic stage is reduced when λ is greater than 0.333, while the supporting capacity of beams has little affected by the change in λ. The slip distribution along the beam length tends to be zig-zagged due to the clustering of studs, and the slip difference increases with the increase of λ.