• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.181-195
• /
• 2020

Characteristics of carbonized biomass obtained from a Wood charcoal briquette manufacturing process using an open hearth kiln are analyzed in this research, and differences in the characteristics based on the results of a mechanical screening process and the position within the kiln. One type of biomass and five types of carbonized biomass were collected from a Wood charcoal briquette manufacturer. After screening and grinding processes were performed on samples of 1 type of biomass and 5 types of carbonized biomass extracted from a Wood charcoal briquettes manufacturer to classify by particle size, fixed carbon, ash, volatile matters, elemental composition, and high heating value (HHV) were measured. Experimental results showed that the carbonized biomass collected from the middle layer had the highest HHV, 20.4 MJ/kg, and therefore had the highest fuel quality. In terms of particle size, the carbonized biomass below 100 mesh had the lowest ash content and the highest HHV, carbon content, and fixed carbon content. Correlation analyses showed that ash content had negative correlations with HHV, volatile matters, fixed carbon, and carbon content, which suggested that ash content affected negatively on fuel quality.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.9-17
• /
• 2016

In this study, a method for CO reduction using char-coal combustions was developed with lignin and glycerin as combustion improvers. The relationship between CO emission and the combustion improvers was confirmed by measuring the CO concentration. The experiment to determine the combustion characteristics was conducted using glycerin, which shows high combustibility at low temperatures, impregnated with lignin, which has a specific surface area. The combustibility, volatility, and CO concentration were measured using thermo-gravimetric analysis(TGA), and gas chromatography-mass spectrometry(GC-MS). This study presents the optimal CO reduction ratio, which occurred when the combustible material contained a 20% blend of combustion improvers. This resulted in a 20-30% CO reduction rate compared to that achieved with normal char-coal.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.901-909
• /
• 2013

Owing to the Increasing use of fossil fuels, worldwide concerns over environmental pollution are increasing. As a solution, ligneous biomass has emerged as a promising alternative fuel in recent times. Therefore, in this study, a moisture evaporation model that largely influences the energy density and efficiency of ligneous biomass is studied using a numerical approach. Furthermore, the thermal characteristics are analyzed in terms of torrefaction temperature and moisture fractions in the wood, and the type of wood species. The results show that the temperature and moisture fractions of wood decrease with an increase in the torrefaction temperature. In particular, when the torrefaction temperature is lower than 423K, there were little changes in the moisture fraction in the wood. Furthermore, it was found that charcoal is produced more slowly as the moisture fraction in the wood increases.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.696-709
• /
• 2020

A board was manufactured for each resin and sawdust addition using the chaff made by carbonizing the chaff charcoal, an agricultural by-product that emerge during the rice pounding process, and sawdust. And effects of the additions of resin and sawdust on coefficients of dynamic and static modulus of elasticity, modulus of rupture, as well as the relationship between the dynamic modulus of elasticity, statis modulus of elasticity, and modulus of rupture were investigated. As phenol resin addition of chaff charcoal-sawdust compound board increases to 10~25%, the bending performance has increased. This suggests that resin addition largely effects the bending performance. Although the bending performance was gradually increased with the increase in sawdust addition, since the coefficients of determination (R²) between the sawdust addition with the coefficients of dynamic, static modulus of elasticity, and modulus of rupture were 0.4012, 0.0809, and 0.1971, respectively. Thus, it showed a relatively lower correlation, and the effect of sawdust on bending performance was small. Since a high correlation was confirmed between dynamic and static modulus of elasticity, and modulus of rupture of chaff charcoal-sawdust compound board, it was confirmed that prediction of static modulus of elasticity and modulus of rupture can be made in a nondestructive way from the dynamic modulus of elasticity.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.28-32
• /
• 2005

This study was performed to find a new use of wood tar from the manufacturing process of wood charcoal. Plywoods made of phenol adhesives mixed with wood tar were manufactured, and physical, mechanical properties and formaldehyde emission were investigated. Plywoods made of phenol adhesives mixed with wood tar were almost same as an original phenol adhesive in physical and mechanical properties and tensile-shear adhesive strength of the plywood was higher than the original one in both non-waterproof and waterproof tests. Formaldehyde emission was lower as the amount of wood tar increased in phenol adhesive.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.244-249
• /
• 2004

In this paper, shielding effectiveness(SE) of the shielding paint of electromagnetic(EM) waves was investigated with actual experiments. The shielding paint used in this study were made of powder of conductive materials - Ag, Cu, Al, Sn, Ni. Cr, Graphite and Charcoal etc. with a solubility in oil and water. Also, the paper was used as a base sheet. The experiment was carried out by using a shielding evaluator(Shielding box) TR17302 with an ADVANTEST spectrum analyzer, model R3361C. It was found from the experimental results that silver, copper, nickel were good candidates as a shielding material against the EM waves with increasing the SE as the composite was laminated. The characteristics of the SE against the EM waves depended on a mode of preparation of specimen. The effects of density of particles on the SE were studied about the EM shielding paint. The SE strongly depended on the electric resistance by density of painting particles. SE increased as the density of particles was increasing.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.13 no.1
• /
• pp.40-42
• /
• 2015

Benzoylureas are chemical compounds best known for their use as insecticides. Diflubenzuron is one of the more commonly used benzoylurea pesticides. Others include chlorfluazuron, flufenoxuron, hexaflumuron, and triflumuron. They act as insect growth regulators by inhibiting synthesis of chitin in the body of the insect. They have low toxicity in mammals because mammals have no chitin. Chlorfluazuron insecticides, which are mixed with solvent naphatha, are commonly used. Thus we assume that in the presented case mental change outcome of poisoning was connected with toxic effects of solvent naphtha rather than with chlorfluazuron action. Components of solvent naphtha, particularly trimethylbenzenes, exert strong irritant action on the gastric mucosa and are very well absorbed from the gastrointestinal tract. We report on a 67-year-old man with stuporous mentality after intentional ingestion of approximately 200 ml of liquid chlorfluazuron in a suicide attempt. He was discharged after conservative treatments including gastric irrigation, charcoal, mechanical ventilation, hydration, and antibiotics for aspiration pneumonia without complications.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.488-499
• /
• 2019

Objectives: This study was conducted to identify the characterization of organics solvent exposure among painting workers in the shipbuilding painting process, especially for their daily variations(within worker variance). Methods: Charcoal passive dosimeters were worn throughout each work shift for 20 days for five painting workers from October 19 to November 26, 2015. A total of 100 samples were collected, analyzed and compared with statutory workplace environmental measurements. Results: The geometric mean(GM) and geometric standard deviation(GSD) of mixed organic solvent(six substances) exposure index(EI) for the 100 samples were 0.42 and 4.42 respectively. The median and range of GSD for within worker EI representing five workers' daily EI variation is 3.72 and 2.63 ~ 5.20, respectively, which is classified as a very large variation(GSD>3). We were able to divide the painting process into two similar exposure groups(SEGs), Touch-up and Spray. Spray painting workers were much more exposed to organic solvent than Touch-up painting workers(GM=0.71 vs. 0.19), but less variably (GSD=3.64 vs. 4.10). xylene is the substance to which the workers were most exposed(GM=16.19 ppm, GSD=4.36), and the exposure characteristics of six substances including xylene is similar to those of EI. Conclusions: The daily variation of organic solvent exposure in the shipbuilding painting process is so high that statutory Assessment of Reliability of Work Environment Monitoring needs to be conducted with statistically sufficient number of samples and evidence.

• Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.182-195
• /
• 2024

Background: Invasive alien plant species (IAP) significantly threaten Nepal's protected areas and local communities. Understanding their distribution, impact, management, and utilization is essential for developing effective management strategies and sustainable utilization practices. The systematic literature review of publications from 2010 to 2023. The search was conducted through the database Nepal Journal online database (NepJOL) and Google Scholar, yielding an initial pool of 4,304 publication. After applying inclusion and exclusion criteria; we meticulously reviewed 43 articles for data extraction. Results: Seventeen IAP are found in protected area, Nepal with the highest prevalence observed in Koshi Tappu Wildlife Reserve, followed by Chitwan and Sukhlaphanta National Park. The most problematic species in terrestrial ecosystems are Mikania micrantha, Lantana camara, and Chromolaena odorata. The grassland ecosystems of wildlife habitats, primarily in the Terai and Siwalik regions, are the most invaded. Various management approaches are employed to mitigate the spread and impact of IAP, including mechanical methods such as uprooting, burning, and cutting. However, these methods are costly, and context-specific interventions are needed. The study also explores the potential use of IAP for economic, ecological, or cultural purposes, such as medicinal properties, energy production potential, and economic viability. Local communities utilize these plants for animal bedding, mulching, green manure, briquette, and charcoal production. Conclusions: Applying silvicultural practices alongside mechanical management is recommended to maintain a healthy terrestrial ecosystem and utilize the removed biomass for valuable products, thereby reducing removal costs and increasing income sources, potentially benefitting both local communities and wildlife in protected areas.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.33-38
• /
• 2005

To find a new use of wood tar which is obtained from the manufacturing process of wood charcoal, a resol type of phenol adhesive using wood tar was made and some adhesion tests on plywood were examined. Phenol adhesive synthesized with pine tar was almost same as an original phenol adhesive in physical properties such as solid content and viscosity and tensile-shear adhesive strength of plywood made of phenol adhesive synthesized with pine tar was not much lower than the original one in non-waterproof and waterproof tests. Phenol adhesive synthesized with oak tar, however, was different from original phenol adhesive in physical properties. Adhesive strength of plywood made of oak tar was $50\%$ lower than the original one on waterproof tests. The amount of emitted formaldehyde increased as the amount of wood tar increased.