• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.67-74
• /
• 2013

주류공기에 수직으로 분사되는 JICF 분사시스템은 연소실내에서 주류공기의 영향을 최소화하면서 미립화 및 연소성능을 향상시키기 위한 추진시스템의 연료분사 방식으로 넓은 적용범위를 가지고 있다. 하지만 JICF 분사시스템에서 산화제인 공기와 연료의 불충분한 혼합성능은 연소실 내에서의 불균일한 화염구조를 형성한다. 따라서 본 연구에서는 JICF 분사시스템의 램제트 연소기에서 연료와 공기의 부족한 혼합성능에 기인한 연소의 불균일한 화염구조를 실험적으로 확인하고, 연료 제트의 침투깊이, 분열점 등을 예측하기 위한 상관관계식을 유도함으로서 JICF 분사시스템에서 연소성능에 영향을 미치는 액체제트와 주류공기와의 분무 및 혼합특성을 파악하였다. 특히, 액체 제트의 침투깊이를 주류공기의 유동방향의 상류와 하류로 나누어 상관관계식을 유도하여 좀더 정확한 침투깊이의 예측이 가능하도록 하였다.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1872-1881
• /
• 1996

LBB(Leak-Before-Break) analysis is performed for the highest stress location of each different type of mateerials in the nuclear piping line. In most cases, the highest stress occurs in the pipe and nozzle interface location. i.e. terminal end. The current finite element analysis approach utilizes the symmetry condition both for locations near the nozzle and for locationa away from the nozzle to minimize the size of the finite element model and to make analysis simple when calculating the J-integral values at the crack tip. In other words, the nozzle is not included in the finite element model. However, in reality, the symmetric condition is not applicable for the pipe-nozzle interface location. Because the pipe-nozzle interface location is asymmetric due to different stiffenss of the pipe and nozzle(both material and dimensions). The simplified analysis approach for pipe-nozzle interface locaiton is too conservative for a smaller diameter piping. In tlhis paper, various analyses are performed for the range of materials and crack sizes to evaluate the nozzle effect for a LBB anlaysis. This paper presents methodology for developing the piping evaluaiton diagram at the pipe-nozzle interface location.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.67-73
• /
• 2001

Three dimensional, elastic-plastic finite element(FE) analyses for circumferential through-wall cracked pipes under combined tension and bending are performed using actual tensile data of stainless steel, for two purposes. The first one is to validate the recently-proposed enhanced reference stress (ERS) method to estimate the J-integral and COD for circumferential through-wall cracked pipes under combined tension and bending. The second one is to compare those results with the GE/EPRI estimations. The FE results of the J-integral and the COD, resulting from six cases of proportional and non-proportional combined tension and bending, compare very well with those estimated from the proposed method. Excellent agreements of the proposed method with the detailed FE results provide sufficient confidence in the use of the proposed method to the Leak-Before-Break(LBB) analysis of through-wall cracked pipes under combined tension and bending.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.479-486
• /
• 2013

In the present work, physicochemical treatments were introduced for de-aggregation and stable dispersion of detonation nanodiamonds (DND) in polar solvents. The DNDs in water exhibited a particle size of 138 nm and high dispersion stability without particular treatment. However, the DNDs in ethanol were severely aggregated to several micrometers in size and showed poor dispersion stability with time. To break down aggregates of DNDs and enhance the dispersion stability of them in ethanol, mechanical force and chemical surfactant were introduced as functions of zirconia ball size, kind of surfactant and amount of surfactant added. From the analyses of average particle size and Turbiscan results, it was suggested that the size of DNDs in ethanol can be reduced by only mechanical force; however, the DNDs were re-aggregated due to high surface activity. The long-term dispersion stability can be achieved by applying mechanical force to break down the aggregates of DNDs and by preventing re-aggregation of them using proper surfactant.

• 폴리머
• /
• 제26권1호
• /
• pp.145-151
• /
• 2002

전분과 글리세롤을 이축 압출기를 사용하여 열간소성 전분(TPS)으로 제조한 후, TPS와 고밀도 폴리에틸렌(HDPE)을 조성을 달리하여 블렌딩하였다. 열적 특성, 형태학, 기계적 물성을 측정하였고, 조절된 호기성 퇴비화 방법(ISO14855)에 의하여 생분해도를 측정하였다. TPS 함량이 증가할수록 인장 강도, 신장율, 그리고 탄성율이 감소하였다. 특히 신장율은 TPS를 소량 첨가하여도 급격히 감소하였다. HDPE/TPS 블렌드의 $T_m$은 변화가 없었고, 이로써 두 고분자간 상용성이 없음을 확인하였다. 블렌드의 파단면 확인은 전자 주사 현미경으로 하였고, 두 물질의 계면에서 상분리가 일어남을 확인하였다. 45일간의 생분해 실험에서 TPS의 함량이 증가할수록 생분해도가 증가하였다.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.3-9
• /
• 2006

전분/PVA 블렌드의 기계적 물성에 영향을 미칠 수 있는 인자들을 고려하여 최적화 조건을 조사하였다. 통계적 방법인 다중혼합물 최적법을 사용하였으며, UTM과 인열 강도계를 통하여 블렌드의 인장강도, 파단신율, 초기모듈러스, 인열강도의 측정 결과를 분석하여 전분/PVA 블렌드의 제조 최적 조건을 결정하였다. 최적화 상태의 전분/PVA 블렌드는 농업용 필름의 기계적 물성 중 파단신율을 제외한 나머지 물성이 목표치와 같거나 조금 상회하는 수준을 나타내었다.

• Composites Research
• /
• 제26권5호
• /
• pp.273-278
• /
• 2013

PLA/PP polymer blends in various ratios (PLA:PP = 9:1, 4:1, 3:1, and 1:1), and their composites (PLA:PP = 1:1) with sisal fiber (10, 15 and 20 wt%) were fabricated using MAPP as compatibilizer. The aim of the work was to reduce the cost of biodegradable composites as well as to improve the impact strength of PLA using PP, a relatively cheaper thermoplastic. The developed composites were characterized for their morphological and mechanical properties. The tensile strength and modulus of the blends were decreased with increasing PP content whereas the strain at break and impact strength are increased. The tensile strength, modulus and water absorption were increased for hybrid composites with increasing fiber content.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1033-1039
• /
• 1996

Electrical and mechanical properties of polymer sheet at cryogenic temperature have been investigated. Tensile stress(and strain at break) in liquid nitrogen(77K) of 79.7MPa(l.2%) and 117.4MPa(2.05%) are evaluated for films of Polypropylene (PP) and Kapton, respectively. Dielectric loss tangent(tan .delta.) of PP and Kapton films is almost independent of the frequency and tensile stress. Also, field strength of PP film at 77K decreases with increasing the tensile stress.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.104.1-104.1
• /
• 2005

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1612-1620
• /
• 2004

This study presents methods to estimate elastic-plastic crack opening displacement (COD) fur circumferential through-wall cracked pipes for the Leak-Before-Break (LBB) analysis of pressurized piping. Proposed methods are based not only on the GE/EPRI approach but also on the reference stress approach. For each approach, two different estimation schemes are given, one for the case when full stress-strain data are available and the other fur the case when only yield and ultimate tensile strengths are available. For the GE/EPRI approach a robust way of determining the Ramberg-Osgood (R-O) parameters is proposed, not only fur the case when detailed information on full stress-strain data is available but also for the case when only yield and ultimate tensile strengths are available. The COD estimates according to the GE/EPRI approach, using the R-O parameters determined from the proposed R-O fitting procedures, generally compare well with the published pipe test data. For the reference stress approach, the COD estimates according to the method based on both full stress-strain data and limited tensile properties are in good agreement with pipe test data. In conclusion, experimental validation given in the present study provides sufficient confidence in the use of the proposed method to practical LBB analyses even though when information on material's tensile properties is limited.