• 한국안전학회지
• /
• 제25권2호
• /
• pp.7-11
• /
• 2010

Difficulties associated with full-scale pipe tests are rather obvious. That is, it is not only difficult to perform them but also very expensive and it requires lots of experience. And the process of the fracture test for the pipe specimen is very difficult and complicated. Because the pipe specimen, the test jig and the test equipment are very large and heavy, it requires lots of costs and times. In this study, to easily perform the fracture toughness test for a pipe specimen, load line displacement data was obtained using the image processing method.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.31-37
• /
• 2009

• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2431-2435
• /
• 1996

In order to determine the effects of hydrostatic pressure on the mechanical behavior of graphite fiber reinforced composites, the modulus, fracture stress(maximum stress), and fracture strain of graphite/epoxy composites have been determined as a function of pressure. Composite specimens used in this study were 90-deg unidirectional and had a 60% fiber volume fraction. Compressive tests under five different pressure levels were conducted. The result showed the modulus measured from as initial slope of stress-strain curve increased bilinearly with pressure with a break at 200 MPa. It was also found that fracture stress and fracture strain increased in a linear fashion with pressure.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.49-54
• /
• 2012

Various anion exchange membranes were prepared by radiation graft copolymerization of vinylbenzyl chloride onto fluorinated films and subsequent quaternization with various tertiary amines such as trimethylamine, N,N-dimethylbuthylamine, N,N-dimethylaniline, and N-methylpiperidine. The quaternizations of the anion exchange membranes were confirmed by measuring of the ion exchange capacities of the membranes. The mechanical properties and the water uptakes were also measured. The elongation at break was found to be largely dependent on the fluorinated film, the quateranry ammonium, and the degree of grafting. The results indicate that the poly (ethylene-alt-tetrafluoroethylene) with quaternized trimethylamine moiety exhibits higher flexible property compared to the other prepared anion exchange membranes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.165-172
• /
• 1993

A non-linear mathematical model has been developed for the dynamic analysis of the reactor internals. The model includes a lumped mass and stiffness with non-linear members such as gap-spring. As hydrodynamic couplings have also been considered in the model, the effect of fluid/structure interaction between internals components due to their immersion in a confining fluid can be studied for the dynamic response analysis. The reactor internals responses for seismic and pipe break excitations have been calculated for the case of with-and without-hydrodynamic couplings.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.10-21
• /
• 2006

Recycled polypropylene (RPP) - Wood Saw Dust (WSD) composites with and without acetylation of filler were produced at different filler loading (15%, 25%, 35% and 45% w/w) and filler size (300, 212 and $100{\mu}m$). The RPP-WSD was compounded using a Haake Rheodrive 500 twin screw compounder at $190^{\circ}C$ at 8 MPa for 30 minutes. The mechanical properties and water absorption properties of modified and unmodified WSD-PP composites were investigated. Acetylation of WSD improved the mechanical and water absorption characteristic of composites. The decrease of filler size (300 to $100{\mu}m$) of the unmodified and acetylated WSD showed increase of tensile strength and impact properties. The composites exhibited higher tensile modulus properties as the filler loading increased (15% to 45%). However tensile strength, elongation at break and impact strength showed the opposite phenomenon. Water absorption increased as the mesh number and filler loading increased. With acetylation, lower moisture absorption was observed as compared to unmodified WSD. The failure mechanism from impact fracture of the filler-matrix interface with and without acetylation was analyzed using Scanning Electron Microscope (SEM).

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.107-113
• /
• 2011

Coolant rubber hoses for automotive radiators under thermal and mechanical loadings can be degraded and thus failed due to the influences of the locally formed electricity. In this study, an advanced test method was developed to simulate the failure problem of the rubber hose. For carbon black filled EPDM (ethylene-propylene dine monomer) rubber used as a radiator hose material the ageing behaviors by the electro-chemical stresses combined with a tensile strain were analyzed. As the tensile strain increased, the current of the rubber specimen reduced indicating an increase of the internal defects and electrical resistance of the rubber specimen. Elongation at break and IRHD hardness rapidly decreased with increasing the ageing time. Both electro-chemical stress and mechanical tensile stress clearly accelerated the degradation of EPDM rubber.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1031-1038
• /
• 2001

In order to verify the analytical methods predicting failure behavior of cracked piping, full-scale pipe tests are crucial in nuclear power plant piping. For this reason, series of international test programs have been conducted. However, full-scale pipe tests require expensive testing equipment and long period of testing time. The objective of this paper is to develop a test system which can economically simulate the full-scale pipe test regarding the integrity evaluation. This system provides the failure behavior of cracked pipe by testing a wide-plate specimen. The system provides the failure behavior of cracked pipe by testing a wide-plate specimen. The system was developed for the integrity evaluation of nuclear piping based on the methodology of hardware-in-the-loop (HiL) simulation. Using this simulator, the piping integrity can be evaluated based on the elastic-plastic behavior of full-scale pipe, and the high cost full-scale pipe test may be replaced with this economical system.

• 자원리싸이클링
• /
• 제23권1호
• /
• pp.70-79
• /
• 2014

본 연구에서는 이축 스크류식 치합형 압출기를 이용하여 재생 폴리프로필렌/폐타이어 분말 복합체를 제조하였다. 세 가지 주요 실험 변수 즉 폐타이어 분말 함량, 폐타이어 분말 크기, 상용화제의 종류 및 함량이 재생 폴리프로필렌/폐타이어 분말 복합체의 물성에 미치는 영향을 자세히 관찰하였다. 폐타이어 분말의 함량이 증가 할수록 인장강도는 감소하였으며 신장률과 충격강도는 증가하는 것이 관찰되었다. 또한 폐타이어 분말의 크기가 작아질수록 인장강도 및 신장률, 충격강도는 증가하였다. PP-g-MA를 첨가 하였을 시 복합체의 인장강도는 증가하였지만 신장률과 충격강도는 감소하였다. 반면에, 상용화제 EPDM-g-MA, SEBS-g-MA의 경우에는 복합체의 인장강도, 충격강도가 증가하였고 신장률은 PP-g-MA와 비교했을 때 매우 큰 폭으로 증가하는 것이 관찰되었다.

• 한국항공우주학회지
• /
• 제46권1호
• /
• pp.1-9
• /
• 2018

람다 날개 형태의 무인전투기는 동체-날개 융합익의 형태를 띄고 있어 일반적인 항공기에 비해 상대적으로 항력이 작고 레이더 반사 면적이 작아 우수한 스텔스 성능을 갖는다. 그러나 앞전 후퇴각에 의해 생성되는 앞전 와류의 영향으로 특정 받음각에서 피칭모멘트가 급격히 증가하는 현상이 나타난다. 본 연구에서는 무미익 람다 날개 형상을 기반으로 한 UCAV 1303 모델을 사용하여 풍동시험과 전산해석을 수행하였다. 실험 풍속은 50 m/s, 받음각 범위는 $-4^{\circ}{\sim}28^{\circ}$ 으로 하였으며 전산해석 또한 실험 조건과 동일하게 연구를 수행하였다. 본 연구를 통해 UCAV의 날개 비틀림이 피칭모멘트의 안정성에 미치는 영향을 확인하였다. 그 결과 날개에 음의 비틀림 각을 적용하였을 때 날개 바깥쪽에서의 유동 박리가 지연되면서 Pitch-break가 발생하는 받음각이 증가하였고, 양의 비틀림 각을 적용하였을 때 Pitch-break가 발생하는 받음각이 감소하였지만 양항비가 증가하는 것을 확인하였다.