• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.269-283
• /
• 2024

Cultured meat is one of the research areas currently in the spotlight in the agricultural and livestock industry, and refers to cells obtained from livestock that are proliferated and differentiated and processed into edible meat. These cell-cultured meats are mainly studied at the lab-scale by culturing them in flasks, and for commercial use, they are produced using scaffolds that mimic cell supports. Scaffolds are broadly divided into fiber scaffolds, hydrogels, and micro-carrier beads, and these are classified according to processing methods and materials. In particular, a scaffold is essential for mass production, which allows it to have appearance, texture, and flavor characteristics similar to meat. Because cultured meat is cultured in a state where oxygen is blocked, it may be lighter in color or produce less flavor substances than edible meat, but these can be compensated for by adding natural substances to the scaffolds or improving fat adhesion. In addition, it has the advantage of being able to express the texture characteristics of the scaffolds that make up the meat in various ways depending on the materials and manufacturing methods of the scaffolds. As a result, to increase consumers' preference for cultured meat and its similarity to edible meat, it is believed that manufacturing scaffolds taking into account the characteristics of edible meat will serve as an important factor. Therefore, continued research and interest in scaffolds is believed to be necessary.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.349-353
• /
• 2008

This study was performed to determine the adherence rates of standard type Salmonella Typhimurium (ST) and wild type Salmonella spp.(WT) in pork after the following contact types and times at $10^{\circ}C$: pork meat (2, 6, 24 hr), conveyer belt (2, 6 hr), stainless steel (2, 6 hr), and cutting board (2, 6 hr). After 6 hr of pork meat to meat fat contact, the adherence rates for ST and WT were approximately 4.21 and 26.87%, respectively, and after 6 hrs of pork meat to red meat contact they were 16.40 and 27.48%, respectively. However, after 24 hr of both types of contact, ST and WT showed 100% adherence rates. The adherence rates for ST after 2 hr and 6 hr of pork meat to conveyer belt contact were 1.34 and 0.60%, respectively, while the adherence rate for WT was 5.14% after 6 hr of contact. After pork meat to stainless steel contact, ST showed adherence rates of zero and 1.59% after 6 and 24 hr of contact, respectively, while the adherence rates for WT ranged from 0.17% after 2 hr to 5.01% after 6 hr. On the other hand, neither ST nor WT offered adherence data following pork meat to cutting board contact. These results suggest that the adherence rates of ST and WT after pork meat to pork meat contact or pork meat to processing surface contact were significantly affected by the contact time and WT presented much higher adherence rates for both types of transmission than ST.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 1999.10a
• /
• pp.29-70
• /
• 1999

Current food sanitation systems for meat and livestock in Australia ar underpinned by HACCP-based quality assurance. HACCP-based quality assurance programs have been implemented by all australian red meat industry sectors, from 'farm-to-fork'. These quality assurance programs are (along with other quality and food safety considerations) the collection of a series of sanitation steps and strategies that aim to ensure that only healthy, clean livestock are presented for slaughter; those healthy, clean animals enter a clean processing plant; contact of carcase surfaces with potential sources of contamination is avoided; carcase surfaces are decontaminated before chilling; and subsequent growth of potential contaminants is avoided. Prospects for food sanitation systems for meat and livestock in Australia lie largely in enhancing current and applying new sanitation strategies and procedures within our HACCP-based quality assurance framework. Prospects include increased focus on actual (Versus perceived) risks; on-farm/feedlot pathogen elimination; increased implementation of existing (or new) decontamination technologies; and an improved cold chain.

• 축산식품과학과 산업
• /
• v.6 no.1
• /
• pp.98-108
• /
• 2017

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.655-660
• /
• 2015

This study investigated the effects of freezing storage temperature and thawing time on the separation of leg meat of the red snow crab Chionoecetes japonicus. Crabs were stored at -20, -30, -40, or -50°C for 2 days and thawed for either 5, 10, 20, 30, or 40 seconds. While thawing, there were no significant differences in pH or acidity among the experimental groups, while the volatile basic nitrogen content increased continuously. The redness of samples stored at -20°C was higher than that of the other groups. The overall acceptance of samples stored at -20°C was also the best. These results demonstrate that no-heating methods may be useful for separating red snow crab leg meat.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.330-335
• /
• 2011

This study was performed to determine the transfer rates of each foodborne pathogen from pork meat packaging during the processing. We analyzed the transfer rate of Listeria monocytogenes from contaminated pork meat to worker's hands (wearing polyethylene gloves, PEG; cotton gloves, CG; and bare hands), cutting boards and knives, and vice versa. Transfer rate of CG 100.00% was higher than that of bare hands 2.513% and PEG 1.511%. In particular, when wearing Co, the transfer rate from the CG to bare hands with CG was 0.08%. Also, the range of transfer rates from contaminated pork meat to cutting board and knife was 0.352-3.791%. In contrast, transfer rates from the workers' hands (with PEG/CG and bare hands) to cutting board, knife, and pork meat ranged from 0.001 to 0.141%. There was a lower transfer rate from workers' hands than from pork meat. These findings indicate that use of PEG could effectively reduce or prevent the cross-contamination compared to CG and provide important information concerning the consecutive transfer of L. monocytogenes during food processing.

• Journal of Environmental Science International
• /
• v.21 no.2
• /
• pp.233-240
• /
• 2012

In this study, the alkiline water washing condition of mackerel(Scomber japonicus) dark meat was investigated to improve processing conditions of red muscle fish meat paste heating gel. Chemical alkaline water(CWM) and electrolytic alkiline water(EWM, pH 12) were used for washing the mackerel raw meat. Washed meats were minced with 2.5% salt and heated at $90^{\circ}C$/15 min to testing texture profile analysis. Moisture of CWM and EWM was increased with both washing times(p<0.05). Crude lipids and protiens were decreased with washing times. Lightness of chemical alkaline water washed mackerel heated paste gel(CWHPG) was higher than electrolytic alkaline water washed mackerel heated paste gel(EWHPG). Redness and yellowness were more decreased than control meats. Jelly strength of CWHPG and EWHPG was not increased more than 2 times wased meat and was increased with protein decrease. Texture profile analysis, max force1 of CWHPG and EWHPG was higher hardeness than the control meat except gel strains. From these results, it could be suggested that electric alkialine water washing is also effective in advance the red meat paste heating gel process of kamaboko industry.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.1
• /
• pp.1-6
• /
• 2016

This study investigated the physicochemical and sensory characteristics of fish paste containing red snow crab Chionoecetes japonicus leg-meat powder (RMP) in 0, 3, 6, 9, and 12% concentrations. The moisture contents of fish paste with RMP ranged from 56.7 to 60.2% and the pH ranged from 7.0 to 7.7. The L values decreased as the RMP concentration increased, and a and b increased. The folding test for all of the fish paste samples scored AA, which indicates good flexibility. The hardness, springiness, gumminess, and cohesiveness increased with the RMP concentration. In the sensory evaluation, the fish paste prepared with 6% RMP was the most preferred. These results suggest that RMP can be added to fish paste to achieve high quality.

• Food Science of Animal Resources
• /
• v.41 no.1
• /
• pp.16-33
• /
• 2021

To stop hunger, reducing food losses is a potential movement towards saving food. A large portion of these losses could be avoided and reduced through the improved food chain in many countries. Raising awareness on how and where food losses occur will help recovering foods such as meat by identifying solutions and convincing people to implement those solutions. This, in turn, will lead to private and public efforts to recover meat that might be otherwise wasted. After highlighting the importance of food saving benefits and relevant statistics, this paper explains the possible ways to reduce meat loss and waste in abattoirs and presents a framework for prevention according to the estimates of meat losses in Iran meat supply. The current article answers the questions of where do we have the meat loss in Iran and what approaches are most successful in reducing losses in the meat industry. The national average loss and waste in meat production are about 300,000 metric tonnes (about 15%). Many segments and players are involved with this huge amount of losses in the meat value chain, a large portion of these losses could be avoided and reduced by about 25% through using by-products with the mechanization of design and manufacturing. The production amount of mechanically deboned meat (MDM) is 105,091,000 kg, concluding the major waste (88.33%) of total poultry losses. Ensuring appropriate actions by exploiting the full potential of engaged Iranian associations and institutes is considered to reduce the losses.

• Korean Journal of Veterinary Service
• /
• v.36 no.4
• /
• pp.291-296
• /
• 2013

The purpose of this study was to determine food safety practices and procedures based on Hazard Analysis Critical Control Point (HACCP) system and to suggest more effective method of HACCP implementation in meat packaging industry in Korea. We used the non-compliance rate of each evaluation item to compare the weak points of prerequisite requirements and HACCP. The prerequisite items related to facility, equipment, and tools showed inadequate level of requirements or unsanitary conditions for proper HACCP operation. A lack of understanding of sanitation standard operation procedures was identified as a fundamental barrier to HACCP implementation. High rate of non-compliance in HACCP items compared to prerequisite requirements signify that small businesses have potential difficulties of applying HACCP due to lack of technical expertise, financial resources for prerequisite requirements, and available personnel to prepare and operate HACCP plan. Also we suggest to revise and minimize current critical control points (CCPs). Time-temperature control of cold-storage rooms for carcasses and final products could be performed by control points of prerequisite requirements. As the occurrence frequency getting lower, metal detector should be replaced by intensified training of sanitary handling and safety procedure. This will be more effective and preventive measures against physical contaminants including metal particles. In conclusion, control point of prerequisite requirement may replace CCP in the plant with simple processing line and no heating process such as meat packaging industry.